other machines for plastic used for sale (408)

A hydraulic three-roll mill Lehmann for fine grinding, dispersing and homogenizing is available. Working width: 600mm, roll diameter: 300mm, weight: approx. 1900kg. Including electrical control cabinet and accessories. Documentation available. An on-site inspection is possible.

A Scheugenpflug material preparation and feeding unit is available. Two-component Scheugenpflug LiquiPrep LP804 20/20 machine, year of manufacture: 2023, tank volume: 50l/20l, machine dimensions X/Y/Z: approx. 1500mm/800mm/2050mm, weight: approx. 430kg, operating hours: 0h. The machine is as new and still in its original packaging. Documentation available. An on-site inspection is possible.

Year of Make: 1992 Line 1 (PS, PP) Extruder screw diameter: 120/90/45mm Maximum gross plant output: 500 kg/h Film thickness range: 0.20–2.00 mm Maximum winding speed, 76 mm core 40 m/min. Maximum winding speed, 152 mm core 40 m/min. Maximum winding speed, 200 mm core 40 m/min. Available film structures: C/AAB, C/BAB, C/BAA Legend: A – Main extruder B – Co-Extruder C – Co-extruder (gloss layer) Additional function: The system is capable of winding two film webs at the same time.

A Schirmacher high-frequency sliding-table welding machine is available. Table dimensions X/Y: 750mm/550mm, max. pressing force: 20kN, generator output: 10kW, operating frequency: 27.12MHz, control system: Siemens. Documentation available. An on-site inspection is possible.

Year: 2014 - technically efficient, ready to work – after full service - motor: 2 x 0.75 kW - pneumatic clamping of the strips - discs with undercutting cutters (2 x 250 mm, 2 x 150 mm) - glass simulator – lateral strip support – stepless (adjustable with a crank and counter) adjustment of the simulator position - manual height adjustment of the work table

Glazing bead saw: Sawing Units 1 Length of scanning rod 1,500 mm and 3,000 mm Cutting length max 90 mm Diameter saw blade 175 mm Cutting height 25 mm Support length 1,500 mm Main motor 0.5 kW Saw blades fixed 45° For plastics Pneumatic clamps Saw feed manual

In need of repair - temperature controller defective! Single Head Welding Machine Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

Double mitre saw Haffner DGS 1873400 for PVC profile blanks Technical data: Built in 1994 Diameter of the saw blades mm 500 2 motors per Kw 2.2 - speed 2800 Cutting length max mm 3400 Cutting length min mm 230 Cutting depth approx. mm 150 Swivel range 45-90 degrees Hydropneumatic saw feed Pneumatic workpiece clamping Control panel with double buttons 2 suction nozzles diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

ECONOMOS IP 4000 Seal Jet CNC lathe for seal production was built in 2000 in Austria by ECONOMOS AUSTRIA Gesellschaft m.b.H. The machine is designed for the production of technical gaskets and sealing elements of various dimensions and profiles. The advanced SEAL-JET technology enables the rapid production of both single parts and short series with high dimensional accuracy and repeatability. The ECONOMOS ECONOM IP 4000 Seal Jet lathe for gasket production is distinguished by its sturdy, welded design with integrated chip trough. Machining is performed by a main spindle rotating at a maximum speed of 3000 rpm. The spindle, guided in precision bearings and encased in a rigid grey cast iron body, ensures high machining stability even under heavy loads. The integrated cooling system effectively dissipates the heat generated during machining, maintaining optimum working conditions through ...

Glazing bead saw manufactured in 2024. This ROTOX GLA 401 features simultaneous cutting of 4 glazing beads at 45° and milling of fixing holes. It includes pneumatic material clamping and an electric locking machine cover for enhanced safety. The machine accommodates PVC profiles with a maximum section of 375 × 45 mm and offers a cutting length of up to 260 mm with a length stop. If you are looking to get high-quality cutting capabilities, consider the ROTOX GLA 401 machine we have for sale. Contact us for further details.

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without controls or sieve. -Manufacturer: H. Dreher, Side-mounted mill cutting mill -Type: S26/26 -Drive motor: 5.5 kW -Number of cutting blades: 4 pieces -Number of counter blades: 2 pieces -Sieve perforation: Ø 8 mm -Inlet cross-section: mm -Rotor width: 260 mm -Rotor diameter: 260 mm -Quantity: 1 cutting mill available Price: per piece -Dimensions: 650/1460/H1880 mm -Weight: 475 kg

Inv. Num. : 9266 Type: DUAL BATCH 40 Producer: Ecoenerg Created: 2022 Parameters: Weight of one batch: 2 x 50 kg One cycle: 4-6 min

SCREW : 100MM MOTOR : 45 KW REDUCER : ZLY250 SPEED : 250 250KGS/HOUR REMARKS : 1)WOODEN CASE PACKAGE 2)NOT INCLUDE INSTALLATION COST 3)SINGLE SCREW EXTRUDER (1 PCS) 4)MOULD (1 PCS) 5)COOLING FLUME (1 PCS) 6)DRY MACHINE (1 UNI) 7)ELECTRICAL CHANGE NET SYSTEM (1 UNI) 8)PELLETIZER (1 UNI) 9) high temperature wire (FOC 30 m) Pelletizing Auto Pusher + Conveyor #1

CPE Gloves Stamping Machine exclude stamping mould, include silicon belt, stamping film holders (one set 2 pcs) and stainless steel surface for each machine

A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible.

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 2 mm - angle range: 30-180 degrees - large heater - side supports - air preparation station

3DGence INDUSTRY F421 – Hochleistungs-FFF-Drucker | Gebraucht Gebrauchter Industrie-3D-Drucker für anspruchsvolle Hochleistungswerkstoffe – vollständig ausgestattet, sofort einsatzbereit Der 3DGence INDUSTRY F421 ist ein professionelles additives Fertigungssystem für den industriellen Einsatz. Mit beheizter Druckkammer, austauschbaren Druckmodulen und einem großen Bauvolumen eignet er sich sowohl für die Serienproduktion von Endteilen als auch für die Entwicklung anspruchsvoller Prototypen aus Hochleistungswerkstoffen wie PEEK, ULTEM™ 9085, PEKK und Verbundmaterialien. Das modulare Druckkopfsystem erlaubt den schnellen Wechsel zwischen verschiedenen Materialklassen ohne Umrüstaufwand. Mit dem mitgelieferten Modul M500+ können selbst hochtemperaturbeständige Polymere wie PEEK und VictrexAM™ 200 zuverlässig verarbeitet werden. Das ebenfalls enthaltene Modul M280 deckt das ...

# Stratasys F170 (Baujahr 2017) – FDM-System mit umfangreichem Materialpaket Zum Verkauf steht eine gebrauchte Stratasys F170 aus 2017, ausgestattet mit FDM-Technologie. Die Maschine befindet sich in gutem Allgemeinzustand. Einschränkung: Der ABS-Druckkopf ist defekt. PLA- und QSR-Supportkopf arbeiten einwandfrei. Technische Basis Hersteller: Stratasys Modell: F170 Technologie: FDM (Fused Deposition Modeling) Baujahr: 2017 Mitgeliefertes Zubehör Die Maschine wird mit umfangreichem Material- und Zubehörpaket übergeben: Build-Trays: 16 Stück (P/N 333-00302) Filamente: 1x PLA Natural Translucent (P/N 333-601319) 1x PLA Light Gray (P/N 333-60109) 1x ABS Ivory (P/N 333-60300) 3x ABS Black (P/N 333-60301) 1x ABS Red (P/N 333-60303) 1x ASA Ivory (P/N 333-60500) 2x QSR-Support (P/N 333-63500) Alle Materialien mit dokumentierten Datecodes zwischen 2017 und 2025. Standort & Preis Standort:  ...

Technical description  Laminator for foil finishing . Solvent-free lamination . Foil _Folie, Alu foil, Cylinder width 1310 mm Laminating width 1300 mm Laminator Type = Duplex Diameter unwinder = 850 mm ( turnstile ) Diameter rewinder = 850 mm ( turnstile ) Sleeve 3 and 6 inches, Speed max = 450 m/ min. With accessories 

For sale is an EPS pressure pre-expander, manufacturer Dae Kong, type DKF 3600, with material feed, flow bed dryer, sieve, automatic weight control, control Siemens, Discharge capacity 20g/l ---- 2000 kg 17g/l -----1700 kg the pre-expander is in very good condition.

Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Model Designation 700kN PELLETER Modes of Operation Automatic/Manual Configuration Single Station Design Self-contained Direction of pressing Horizontal Material loading Automatic Material Unloading Semi-automatic Drive Self-contained Main Ram Pressing Force (max) 700kN | 70 Tons Main Ram Pressing Force (min) 70kN | 7 Tons Main Ram Stroke (max) 70 mm | 2.75 ins Max Hopper & Die Stroke 184 mm | 7.25 ins Max Fill Length 76 mm | 3 ins Min Fill Length 25 mm | 1 ins Hydraulic Oil Specification ISO 32 Oil Tank Capacity 300 Ltrs 66 Galls Hydraulic W ...

BLS Lamination Press has been rebuilt to meet your lamination needs. Specifications: Tonnage: 20 Ton Max Temperature: 150°C Electric Heated Platen Table Size: 600 mm x 600 mm Daylight: 425 mm Open/Closing Speed: 10 mm/s Omron PLC HPU

Bespoke built Hydraulic press for the manufacture of airplane seat back Force: 100 ton Table size 2000mm x 2000mm Platens drilled for oil heating Run out table Omron PLC Cylinder in need for repair, oil heater not included

Rotox Water Slot Mill

Single Head Corner Welding Machine

Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos -Quantity: 1 device available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

New, 250 hours of use • Feeds ground material from 6 to 10 mm and micronizes it to 500-600 μm; • Suitable for micronizing PP, PE, PS, ABS, PA, APET, and PMMA; • The material is fed into the center of a set of fixed discs and a set of rotating discs at high speed, with centrifugal force bringing the micronized material to the conveyor line; • Feeds through a stainless steel hopper with a vibrating feeder; Model Disc Diameter Motor Power Fan Flow Rate MP500 500mm 55 kW 7.5 kW 300 - 400 kg/h