extruders used for sale (350)

Key data: 60 mm, 30 , 150 U/min

used Bellaform extruder with 60 mm screw diameter, strand nozzle, water bath and strand granulator

Key data: 90 mm, 30 , 110 U/min

used 90 mm extruder with strand nozzle, water bath and strand granulator

Key data: 35 mm, 25 , 103 U/min

Used extruder 35mm - 25 l/d with 5.6 kW drive 3-zone auger 3 heating/cooling zones on the cylinder + 1 tool zone Mass pressure sensor 500 bar All machine cables designed to be plugged in Control cabinet with main switch, motor controller, mass pressure indicator and 4 pieces of temperature controller Function-tested

This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.

Rod line consisting of: Feeding system with agitated hopper Werner & Pfleiderer extruder ZSK model Ø53x33D twin-screw Manual filter changer, CFM75 model 10-strand + 6-strand rod granulation head TI400/4 4 M immersion tank Periplast dryer Granulator Screening

KAUTEX KCC30 Extrusion Blow Molding Machine Year: 2012 Operating hours: 33,000 h 1 station Clamping force: 300 KN Screw diameter: 90 mm 4 kg accumulation head (HDPE)Platen Dimensions : 530 x 700 mm Distance between plates 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Control system Blow command Head type: Vertical head with hydraulic accumulator Maximum container volume: 30 liters Die diameters: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 m3/h Pressure air: 6 - 10 bars Installed power: 20 KW Number of temperature zones: 5

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ROTATING SCREEN, construction in Aisi304 stainless steel, previously working on a 160 mm extrusion line, stainless steel screen with 17 mm holes, 2 exits for lumps and good materials, 0,25 kw motor, Bonfiglioli gearbox, loading hopper 305 x 505 mm., excellent conditions, installed power - used power in work: about 60-65% : 0,25 kw, availability: immediate, conditions: excellent

PREALPINA CDM EXTRUSION LINE 105 mm strand, loading hopper for hard plastics (possible addition of feeding screw on request), extruder with screw Ø 105 mm 35 L/D, n.1 vacuum degassing pump, d.c. motor 117 kw 400 V 3Ph.50 Hz, semi-automatic, non-stop, hydraulic screen changer, hydraulic pack, strand die, cooling bath, air drying tunnel, strand pelletizer, vibro classifier, The line is offered reconditioned, availability: 6 weeks from confirmation, options available: different cutting, different screen, upstream and downstream equipment, capacity: 400 kg/h, conditions: reconditioned with warranty, type: single screw

Key data: 90 mm, 32

concerning pdf attached

Key data: 90 mm, 32

concerning pdf attached

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing fo ...

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, nominal throughput rate 380 kg/h (depending on material and feeding rate), ABB Main drive 117 KW 380 V 50 H 3Ph (65% used in work), loading hopper, extruder with heaters and vents, fitted with a 105 mm Ø screw 40 L/D, n.1 vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer (200 mm Ø)complete with hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet, CE compliance, User’s manuals, Electrical drawings, The line is offered either CHECKED or RECONDITIONED to various extents., capacity: 300-430 kg/h nominal

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRT WATER RING PELLETIZER, for PE PP PS PC ABS, nominal capacity 600-700 kg/h (tested up to 900 with PS), N.4 cutting blades, N.1 thermoregulation zones, Heating power 8.00 kW, Cutting motor power 4.00 kW, N.1 water pumps, heat exchanging unit, Single water pump power 3.00 kW, Vertical centrifuge power 5.50 kW, Steam vacuum power 0.25 kW, soundproofed discharging cyclon, Total installed power 20.75 kW, constructed in 2006, only 200 worked hours, excellent conditions, installed power - used power in work: about 60-65% : 20.75, conditions: as new, availability: immediate, capacity: up to 600-700 kg/h (tested with PS 900 kg/h), PRESENT CONDITIONS: as new, excellent quality, price is less than 50% of a new one

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally or partially reconditioned (photos show the machine during reconditioning), installed power - used power in work: about 60-65% : 1 ...

FIMIC RAS 325 BACKFLUSH, fully automatic screenchanger, for back-flush only, so for contamination under 5%, no costs for doctor blades, no cost for laser filter., works with standard mesh, capacity related to screening mesh - with a 250 µ mesh, up to 700 kg/h, connected for test, offered totally reconditioned, with new control panel (or with drawings only), availability: 4 -5 weeks time, capacity: Max 500-600 kg/h, conditions: totally reconditioned, type: fully automatic - backflush

Reifenhäuser FM 1300-01 Blown Film Extrusion Line + 250kg Hoist Overview For sale is a heavy-duty tubular film extruder (blown film line) manufactured by the highly reputable German brand Reifenhäuser. Designed to produce continuous plastic film rolls (LDPE, LLDPE, HDPE), this machine is a solid piece of industrial engineering (Made in West Germany). The lot also includes a 250kg industrial hoist, making it a comprehensive package for plastics manufacturing facilities looking to expand their film blowing capacity. Key Technical Specifications Manufacturer: Reifenhäuser GmbH & Co. Maschinenfabrik Model: FM 1300-01-A1 Year of Manufacture: 1989 Machine Number: 34031 Condition: Used (Dismantled) Production Capabilities Film Type: Blown Film (LDPE, LLDPE, HDPE) Flat Film Width: Up to ~1300 mm Bubble Diameter: Approx. 800 – 1300 mm Typical Thickness: 2 ...

2018 Dr. Collin ZK 16 Twin-Screw Lab/Pilot Polymer Extrusion Line Overview Excellent opportunity to acquire a complete, high-quality laboratory/pilot extrusion line manufactured by Dr. Collin GmbH, an industry leader in R&D and polymer processing equipment. Built in 2018, this co-rotating twin-screw extrusion line (ZK 16 model) is specifically designed for processing plastic materials in small batches, making it ideal for research and development, testing, compounding, and new formulation development. Key Technical Specifications Manufacturer: Dr. Collin GmbH – Lab & Pilot Solutions Model: ZK 16 (Twin-Screw Extruder) Year of Manufacture: 2018 Condition: Used (Dismantled and ready for transport) Screw Diameter: ~16 mm (Co-rotating twin-screw) Power: 8 kW Voltage/Current: 400 V + N + PE / 15 A / 3~ 50 Hz Operating Pressures: Water: 4 bar / Compressed Air: 4 ...

Screw ø 75-36D; approx. 600 kg/h A.C. Engine 182.0 kW

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Range : ø 10-40 mm plain pipe; or 40-110 mm corrugated pipe, 20 m/min max. Remark : ID 450-600mm; OD 1200mm Max Width 100-400mm

Range : ø 20-75 mm (SDR 11 & 13.6) Core diameter : 760-1600 mm Width : 140-500 mm Outer diameter max. : 2700 mm Remark : Incl. cutter, binding unit, ejector

Key data: 72 mm, 28 , 50 U/min

Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, for LDPE and HDPE, die diam.97 mm., 800 mm wide single winder, fixed pull off, fixed die head, Maximum throughput rate 35 kg/h, height of pul off 3.700 mm from ground, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

length: 1500 mmwidth: 700 mmheight: 830 mma workbench with a viceThe technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.