plastics and rubber processing machines used for sale (2,869)

used Bekukm BM 502 Blow moulding machines. Single-station machine for containers up to max 8 ltr. Extruder S 90. Single head with viewing strips. Other accessories, such as conveyor belts

Key data: 170 mm

used COPERION Werner Pfleidere ZSK 170 W 1920/1750 + DSE 180 Double screw-type extruding machine. Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW Since 2021 a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - Year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 ...

used Fetzel SOVA1 Coating and printing plants. Format lamination line / lamination line / laminating machine Make Fetzel Type SOVA1 Total power 8 KW Compressed air 6 bar / 250 l/min. Lamination width up to 400 mm Total length 4000 mm, total width 1100 mm, total height 1800 mm With 3 winding/unwinding rollers at the start, heated laminating roller at the top and bottom, laminate winding and protective paper unwinding at the end. Various measuring rollers and deflection rollers. With documentation.

used USM GTH 2165 Cart beam punch. Cart beam punch USM GTH 2165 For stamping leather, textiles, plastics and similar flat materials. Punching 30 tons Year of manufacture: 1986 Weight 2500 kg Dimensions approx. 3.0 x 1.0 x 2.5 m Broken return springs were replaced. Machine works perfectly. With roller stand.

used PERTICI ALEXANDER Window production machines for plastic windows. Year: 2007 - technically efficient, ready to work - after full service - pneumatically operated rotary table -90°/0°/+90° - working range: 200 x 240 x 2500 mm - 4 kW motor - speed ​​control (inverter) - 2 electronic position indicators - pneumatic profile clamping - cooling and lubrication system - copying template

used Arburg Allrounder 370 C 800-250. Specification Injection moulding machine Arburg Allrounder 370 C 800-250 General data Clamping force: 50 t Year of Make: 2007 Control: Selogica Weight: 3,180 kg Clamping unit 800 Clearance spar spacing: 370 x 370 mm Tool installation height: 250 mm Opening travel: 440 mm Ejector force: 40 kN Ejector travel: 150 mm Injection Unit 250 Screw diameter: 40 mm Spray volume: 185 cc Spec. Spray pressure: 1390 bar Facilities 2 x hydraulic core pull 5 tool heating zones Rotameter

Key data: 2000 mm, 562 , 55

used Engel Victory 1050/200 Power. Specification Injection Moulding Machine Engel Victory 1050/200 Power General data Clamping force: 200 t Year of Make: 2009 Control: CC200 Weight: 12,900 kg Clamping unit Size of the clamping plates: 960 x 830 mm Opening travel: 755 mm Ejector force: 80 kN Ejector travel: 180 mm Injection Unit 1050 Screw diameter: 55 mm Spray volume: 511 cc Spec. Spray pressure: 2053 bar

used Demag Systec Servo 420/820-2300. Specification Injection Molding Machine Demag Systec Servo 420/820-2300 General data Clamping force: 420 t Year of Make: 2015 Control: NC5 Total connected load: 78 kW Weight: 21,000 kg Dimensions (L x W x H): 8.02 x 2.21 x 2.57 m Clamping unit Size of the clamping plates: 1200 x 1200 mm Clearance spar spacing: 820 x 820 mm Tool installation height: 380 - 825 mm Opening travel: 770 mm Max. plate spacing: 1595 mm Ejector force: 96 kN Ejector travel: 230 mm Injection Unit 2300 Screw diameter: 70 mm Spray volume: 1212 ccm Injection weight in hp: 1,100 g Spec. Spray pressure: 1877 bar L/D Screw Ratio: 20 Hydr. Drive power: 51 kW Cylinder heating capacity: 27 kW Facilities Hydraulic core pull: 4 (+ 2 additional connections on the hard drive) Hydraulic cascades: 4 Hot runner control points (zones): 40 Servo-hydraulic pump ...

used Demag System 650/1000-3300. Specification Injection Moulding Machine Demag Ergotech 650/1000-3300 General data Clamping force: 650 t Year of Make: 2005 Control: NC4 Clamping unit Size of the clamping plates: 1450 x 1350 mm Clearance spar spacing: 1000 x 900 mm Tool installation height: 450 - 950 mm Opening travel: 930 mm Max. plate spacing: 1880 mm Ejector force: 96 kN Ejector travel: 300 mm Injection Unit 3300 Screw diameter: 80 mm Injection volume: 1779 ccm Injection weight in hp: 1600 g Spec. Spray pressure: 1855 bar L/D Screw Ratio: 20 Facilities Hydraulic core pull: 4 Hydraulic cascades: 8 Hot runner control points (zones): 16 Robot Wittmann W 843 Pro, built in 2021 (Z 3,000 / Y 2,000 / X 1,200 mm, C-axis servo 180°, B-axis servo 270°) included in the scope of delivery

used Demag System 1300/1500-11500. Specification Injection Moulding Machine Demag System 1300/1500-11500 General data Clamping force: 1300 t Year of Make: 2008 Control: NC4 Total connected load: 189 kW Weight: 86,700 kg Dimensions (L x W x H): 8.09 x 3.41 x 2.99 m + 6.25 x 2.58 x 2.99 m Clamping unit Size of the clamping plates: 2150 x 1880 mm Lights spar spacing: 1500 x 1250 mm Tool installation height: 700 - 1400 mm Opening travel: 1500 mm Max. panel spacing: 2900 mm Ejector force: 233 kN Ejector travel: 350 mm Injection Unit 11500 Screw diameter: 110 mm Spray volume: 5797 cc Injection weight in hp: 5200 g Spec. Spray pressure: 1971 bar L/D Screw Ratio: 24 Hydr. Drive power: 110 kW Cylinder heating capacity: 79.1 kW Facilities Hydraulic core pull: 4 Hydraulic cascades: 12 Hot runner control points (zones): 32 Robot Wittmann DR 853, built in 2014 (Z 3 ...

used Enka Technic Reifenhauser spining equipment, spinerette, nonwoven spinnin. reifenhause, enka technica spunbond nonwoven spinerettes. hollow fiber spinerette , standard fiber spinerrete, fine fiber spinerettes. from 5.000 - 45.000 eur

used HAFFNER BF 354. - technically efficient, ready to work – after full service - motor: 0.55 kW - working range: 410 x 110 mm - pneumatic profile clamping - pressure reducer

used Arburg 275V + 375V. AB25V: Designation: Arburg 275 V 250-70 Year of Make: 2007 Clamping force: 250kN Screw diameter: 18mm Tiebar spacing: 275 x 275 FROM 50V: Designation: Arburg 375 V 500-100 Year of Make: 2008 Clamping force: 500kN Screw diameter: 15mm Tiebar spacing: 375 x 375

used Zweiwellenzerkleinerer Shredder Sant Andrea. Twin-shaft shredder Sant Andrea - Drive: approx. 30 kW, 380 V - Rotor length, diameter: 750 mm, 520 mm - Hydraulic drive of the rotor shaft - Control cabinet with control unit Suitable for: cables, plastics, wood, fabric, thin-walled ferrous and non-ferrous metals Weight: approx. 2900 kg Year of manufacture 1999, Factory overhauled 2021 Condition good, immediately available!

used ROTOX FWS 281. Year: 2013 - technically efficient, ready to work – after full service - 4 spindles - internal rebate support, resulting in fewer milling unit adjustments - simultaneous milling of 2 offset, length-adjustable water slots in 2(3) planes - selection of milling units for the right or left end of the profile bar using a two-handed switch - selection of unit for visible or hidden drainage using a manual switch - adjustment of units to milling position using handwheels and adjustment aids - two-handed operation

used Schredder ISVE Zerkleinerer Shredder MR2260. The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Machine pre-equipped for cooling Weight: approx. 1,800 kg Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Year of Make: 2019 Machine in good condition and ready for immediate use!

Key data: 2700 kN, 29 g/PS

used Desma D 969.250 Z (S3). We offer this DESMA D 969.250 Z (S3) rubber processing machine in mint condition, built in 2021. Clamping force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive capacity: 72/39 l/min Pump drive current consumption: 32.0 A Pump drive power: 22 kW Nozzle application force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Hydraulic motor hours: 730 hours, Hydraulic pump (clamping force): 65 Hours, Operating System: active 3,360 hours Ideal for the production of: - Technical moulded rubber parts - Seals and O-rings - Automotive and industrial c ...

used KRAUSS MAFFEI MX 1600-33000. B&A REF: 9330 TON: 1600 SCREW DIAMETER: 175MM SHOT WEIGHT: 16042 STROKE VOLUME: 17438CM3 INJECTION PRESSURE: 1843AR PLATEN SIZES: 2250 X 2100MM DBTB: 1850 X 1400MM MIN MOULD HEIGHT: 700MM MAX MOULD HEIGHT: 1600MM MOULD OPENING STROKE: 2700MM MAX DAYLIGHT: 3400MM EJECTOR STROKE: 350MM CONTROLS: MC5 CORE PULLING: 4 AIR VALVES: 2 MOTOR: 200 HEATING CAPACITY: 191KW ROBOT: KRAUSS BEAM SERVO SCREW DRIVE: ELECTRIC

used NEGRI BOSSI VH 1500-8400. B&A REF: 9335 TON: 1500 SCREW DIAMETER: 110MM SHOT WEIGHT: 4700 STROKE VOLUME: 5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES: 1870 X 2070MM DBTB: 1300 X 1500MM MIN MOULD HEIGHT: 600MM MAX MOULD HEIGHT: 1400MM MOULD OPENING STROKE: 1700MM MAX DAYLIGHT: 3100MM EJECTOR STROKE: 300MM CONTROLS: COLUMBIA CORE PULLING: 3 AIR VALVES: 2 HEATING CAPACITY: 42KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: ELECTRIC

used WITTMANN BATTENFELD Smart 300/2250. B&A REF: WITTMANN BATTENFELD SmartPower TON: 300 SCREW DIAMETER: 65MM SHOT WEIGHT: 991 STROKE VOLUME: 1078CM3 INJECTION PRESSURE: 2070AR PLATEN SIZES: 1130 X 1155MM DBTB: 800 X 720MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 850MM MAX DAYLIGHT: 1250MM EJECTOR STROKE: 300MM CONTROLS: UNILOG B8 CORE PULLING: 2 AIR VALVES: 6 MOTOR: SERVO HYDRAULIC HEATING CAPACITY: 24.5KW ROBOT: WITTMANN WX 152 SERVO SCREW DRIVE: HYDRAULIC HOT RUNNER: 8 ZONE

used NEGRI BOSSI CANBIO 1300H-400. B&A REF: 9340 TON: 130 SCREW DIAMETER: 40MM SHOT WEIGHT: 2015 STROKE VOLUME: 232CM3 INJECTION PRESSURE: 1710AR PLATEN SIZES: 620 X 665MM DBTB: 410 X 460MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 420MM MAX DAYLIGHT: 920MM EJECTOR STROKE: 150MM CONTROLS: COLUMBIA CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9KW ROBOT INTERFACE: EUROMAP 67 ROBOT: WITTMANN BRIMUS 16 SCREW DRIVE: HYDRAULIC

used NEGRI BOSSI CANBIO 5500H-4250. B&A REF: 9341 TON: 550 SCREW DIAMETER: 90MM SHOT WEIGHT: 2365 STROKE VOLUME: 2600CM3 INJECTION PRESSURE: 1630AR PLATEN SIZES: 1310 X 1260MM DBTB: 900 X 800MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1750MM EJECTOR STROKE: 300MM CONTROLS: COLUMBIA CORE PULLING: 2 AIR VALVES: 2 MOTOR: 55 HEATING CAPACITY: 34KW ROBOT: STYRAMA SERVO SCREW DRIVE: HYDRAULIC

used NEGRI BOSSI EOS ST 1100H-350. B&A REF: 9343 TON: 110 SCREW DIAMETER: 35MM SHOT WEIGHT: 162 STROKE VOLUME: 178CM3 INJECTION PRESSURE: 1955AR PLATEN SIZES: 770 X 730MM DBTB: 480 X 440 MM MIN MOULD HEIGHT: 80MM MAX MOULD HEIGHT: 350MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 850MM EJECTOR STROKE: 125MM CONTROLS: TACTUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 15 SERVO HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE MOTOR: HYDRAULIC

used Tiefofen zum Homogenisier Tiefofen zum Homogenisieren vo n Walzbarren. Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnah ...

used Blake 303-1600-270. Tracked extractor, used Manufacturer: Blake Type: 303-1600-270 Year of Make: 1997 Lug width: 300 mm Passage width: max. 500 mm Passage height: 100 mm Effective contact length: 2400 mm Pull-off speed: Level 1: max. 4.0 m/min. Level 2: max. 8 m/min. Pull-off force: approx. 40,000 N Drive motor: DS motor, 7.5 kW Motor control: Frequency converter Crawler clamping: pneumatic, front and rear Extrusion height: 1000 – 1200 mm Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: refurbished

used Erlenbach EHV-c 1270/670. For sale is a molding machine, manufacturer Erlenbach, type EHV-C 120/670.The machine is in good condition and can be viewed under power by appointment

used Kurtz KA-Line. For sale is a Kurtz automatic molding machine of the type A-Line, built in 2010, The machine is equipped with a tool for EPS plates and a manipulator. The condition is very good and can be visited under power by prior appointment.

used CHANGZHOU DALI PLASTICS M DL-2400 THREE LAYER CASTING MA F5B SINGLE EXTRUDER CASTING MACHINE. DL-2400 THREE LAYER CASTING MACHINE SINGLE EXTRUDER CASTING MACHINE

used kalander kalander. Calender

used ENGEL ES 80/50 HL. ENGEL ES 80/50 HL injection moulding machine was built in 1996 in Austria by ENGEL Austria GmbH. The machine is designed for the efficient production of plastic components used both in everyday products and in many industrial sectors. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL ES 80/50 HL features, among others, a 25 mm diameter screw and a precision mould clamping system with a clamping force of 50 tonnes. Day-to-day operation of the machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of injection moulding process parameters. All this is complemented by an extremely rigi ...

used ENGEL ES 200/80 HL. ENGEL ES 200/80 HL injection moulding machine was built in 1998 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components of various shapes, colours and applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The ENGEL ES 200/80 HL features, among others, a 22 mm diameter screw and a precision mould clamping system with a clamping force of 80 tonnes. All injection moulding parameters are programmed via the intuitive ENGEL CC100 control system, which simplifies day-to-day operation of the machine. The injection moulding machine can also be equipped with production automation systems to increas ...

used ENGEL VC 80/25 TECH. ENGEL VC 80/25 TECH injection moulding machine was built in 2004 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components used both in everyday products and in many industrial sectors. These components are produced using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL VC 80/25 TECH is an excellent solution for both single-unit and series production. The machine is equipped, among others, with a 22 mm diameter screw and a precision mould clamping system with a clamping force of 25 tonnes. Day-to-day operation of the injection moulding machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise se ...

used BORCHE BS 120. BORCHE BS 120 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the mass production of technical components and everyday products made from plastics, in a variety of shapes and for various applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The offered machine represents the Borche BS Plus series, designed for companies seeking high efficiency with reduced operating costs. Compared with the manufacturer’s standard models, it features an energy-saving servo drive and a more efficient pump, enabling more economical operation. The BORCHE BS 120 Plus also stands out wi ...

used BORCHE BS 150. BORCHE BS 150 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the mass production of plastic parts used in both everyday products and in many industrial sectors. These parts are manufactured using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. As a result, precise and repeatable parts of high quality are produced. The offered machine belongs to the Borche BS Plus series, designed for companies seeking lower operating costs whilst maintaining high production efficiency. Compared with the manufacturer’s standard models, it is equipped with an energy-saving servo drive and a more efficient pump. The BORCHE BS 150 Plus also features, among others, a 45 mm diameter screw  ...

used KRAUSS MAFFEI KM 175-1000 C2. KRAUSS MAFFEI KM 175-1000 C2 injection moulding machine was manufactured in 2002 in Germany by Krauss-Maffei Kunststofftechnik München Germany. The machine is designed for the mass production of plastic components of various shapes, colours and applications. The components are produced using the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This process enables the production of precise and repeatable components of high quality. The KRAUSS MAFFEI KM 175-1000 C2 is equipped, among others, with a 55 mm diameter screw and a precision mould clamping system with a clamping force of 175 tonnes. Thanks to additional core pulls, the machine can work with more advanced moulds for the production of parts with complex geometries. Day-to ...

used ARBURG ALLROUNDER 470 C 1500 -400. Manufacturer: ARBURG Model: ALLROUNDER Centex 470 C 1500 - 400 Year: 2006 Condition: Used Stock number: 9406 Clamping force: 150 t Screw diameter: 40 mm Injection capacity: 201 cc Maximum distance between mounting plates: 750 mm Injection Molding Stroke: 500 mm Distance between uprights (horizontal): 470 mm Distance between uprights (vertical): 470 mm

used Krauss Maffei PrecisionMolding 160-750. Manufacturer: Krauss Maffei Model No.: PrecisionMolding 160-750 Year: 2022 Condition: Used Stock number: 9405 Clamping force: 160 t Screw diameter: 50 mm Injection capacity: 393 cm³ Distance between uprights (horizontal): 570 mm Distance between uprights (vertical): 520 mm

used Walther Couplings. Accessories Walther Couplings

used Förderbänder verschiedene. 2 x Conveyor belts

used Wittmann GWK + Motan. 6 x temperature control units (Wittmann, GWK and Motan)