planing machines used for sale (511)

Key data: 410 mm, 240 mm, 4 kW

SCM 2041 FS Planer and Thicknesser Manufacturer SCM Italy AB 66989 Ref 110830 Year of manufacture approx. 1994, from school use in good condition 3 cutterblock Planing shaft speed 5000 rpm Planing: Table length 2000 mm Planing width 410 mm Support table length 1040 mm Support table length 910 mm Max. Chip thickness: 10 mm Jointing fence swivelling 0 - 45° Table adjustment for planer with rotary lever Pressure link vibration guard Thickness planing: Planing width 410 mm Max. chip thickness: 7.5 mm Chip thickness: 7.5 mm Min. planer thickness: 3 mm Max. planer thickness: 240 mm Planing thickness: 240 mm Thicknessing table length: 730 mm Sliding table roller Planing shaft speed 5000 rpm Feed speeds 6 and 10 m/min Height adjustment of thicknessing table with handwheel Infeed roller steel Exit roller steel Connections: Motor power: 4 kW with motor brake  ...

Weinig moulder, type Hydromat 1000, Manufacture year 2008

Number of spindles: 6 St.Working width: 230 mmWorking height: 160 mmFeed motor: 4 kWDimensions (L/W/H): 4400 x 1800 x 1500 mmWEINIG Unimat 23 Automatic Planing and Grooving MachineFor sale on behalf of a customercustomer is still working on it, machine can be visited--------------------------------------Manufacturer’s Technical Specifications:Working width: 20–230 mmWorking height: 6–160 mmNumber of spindles: 6Motor power per spindle: 5.5 kW (7.5 PS)Feed motor power: 4.0 kW (5.5 PS)Spindle speed: 6,000 rpm3 units, table rollers------------------------------- -------Planing table length: 2 m1 adjustment gauge2 planing heads, 240 mm3 brake units are defective, these could be reinstalled by an electrician.--------------------------------------Additional technical data (former order confirmation) attached--------------------------------------Price of the above-mentioned machine upon re ...

Working width: 520 mmLength of the planing table: 3000 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 3000 x 1000 x 1200 mmweight of the machine ca.: 850 kgcutting capacity: 20 mmSCM F520 surface planer (jointer)Total table length: 3000 mmInfeed table length: 1780 mmOutfeed table length: 1180 mmWorking width: 520 mmCutterblock with straight knivesCutterblock diameter: 120 mmCutterblock speed: 5000 rpmNumber of planer knives: 4Max. depth of cut: 20 mmTable height: 860 mmMotor power: 4 kW (5.5 hp)Available from stock, loaded onto transportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig Profimat 23 FN01 four-sided planer for dowel production Working width 120mm Number of spindles 3 Spindle layout: 7.5kw Down Top 11kw Down 7.5kw Pneumatic Material Clamps Feed speed adjustable 5-30m/min 3kw feed motor Machine dimensions 290x130x187cmH

Weinig Profimat 23 FN01 four-sided planer for dowel production Working width 120mm Number of spindles 3 Spindle layout: 7.5kw Down Top 11kw Down 7.5kw Pneumatic Material Clamps Feed speed adjustable 5-30m/min 3kw feed motor Machine dimensions 290x130x187cmH

Key data: 630 mm, 300 mm, 7 kW

For sale: SCM Nova S 630 Thickness Planer – brand new, 630 mm working width The machine is brand new and available to order. Before placing an order, we confirm the current delivery time and exact configuration. The machine's greatest advantages are its 630 mm working width and robust construction, ensuring stable and consistent machining results. Four feed speeds and electric table height adjustment allow the operating parameters to be adapted for both intensive planing and precise thickness calibration. Specifications: • manufacturer: SCM • model: Nova S 630 • working width: 630 mm • working height range: 3.5–300 mm • maximum depth of cut: 8 mm • worktable dimensions: 640 × 1000 mm • minimum workpiece length: 260 mm • minimum workpiece width: 10 mm • cutterblock diameter: 120 mm • number of knives: 4 • knife dimensions: 35 × 3 × 640 mm  ...

Manufacturer: WEINIG (Michael Weinig AG) Model: Powermat 700 Machine type: Four-Sided Planing and Moulding Machine Year of manufacture: 2023 Machine No.: 10008719 Standard Technical Specifications: Working height: 10–160 mm Working width: 20–230 mm Spindle speed: 7,000 rpm (except straightening spindle) Feed speed: 5–40 m/min, frequency controlled Max. tool cutting circle on horizontal spindles: 200 mm (except 1st bottom spindle) Max. tool cutting circle on vertical spindles: 200 mm Standard motor power, vertical spindles: 7.5 kW Standard motor power, horizontal spindles: 7.5 kW Standard Equipment / Control: Comfort Set operating concept Memory Plus control Electronic digital read-outs Pressure shoe in front of top spindle, feeding from the tool Spindles started and stopped by frequency converters Electrical Data: Operating voltage: 3 × 400 V / 50 Hz Control voltage: 24 V Total ...

Code: 0073 Brand: CASOLIN Model: 530 DIGIT - CE Standard Surface planer for joinery workshops, furniture, window frames , doors, sawmills, wood carpentry, plastics, composites and various materials - CE Standard Technical data: Heavy and rigid structure Motor-driven lifting of feed table with foot control pedal Digital reading of thickness being removed Table width mm 530 Table length mm 2970 N° 4 knives Planer shaft diameter mm 120 Knife dimensions mm 530 x 35 x 3 Cutterblock speed rpm 5000 Rabbet mm 8 Motor power Hp 5,5 Dust suction hood diameter mm 160 Overall dimensions mm 2970 x 1100 x 1150 h Weight kg 820

Kupfermühle moulder, type VUIN 605, 6 spindles

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-30 m/min.control: Powercom Weinig Powermat 500 (Window Version for window producers)5 x PowerLock--------------------------------------------------------The machine will be a partial renovated at our warehouse prior to delivery.The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated.Technical Summary:--------------------------------------------------------- 6 spindles, 5 of which are PowerLock- 8,000 rpm- Large PowerCom control system- Spindles 2, 3, and 4: CNC-controlled axial adjustment- Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment- Window package for glazing bead separation:pneumatic cycling for right and top spindlesfor bead separationDetailed Description:------------------------ ...

Number of spindles: 4 St.Working width: 230 mmWorking height: 150 - 200 mmLength of the planing table: 2000 mmFeed motor: 4 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig Hydromat 17B high-performance planer and moulder, year 1989. Heavy modular cast construction for precise continuous wood machining. Feed speed 5–35 m/min, feed motor 5.5 kW, 380 V / 50 Hz, 2,000 mm table, 10 mm stock removal adjustment. Siemens S5-130 WB CNC with 12-inch display and up to 16 axes. Includes EHM 14 feeding magazine: 220 mm working width, workpiece length 300–3,000 mm, pneumatic feed, 6 bar, up to 100 cycles/min. Last overhaul 2022; last service 2024.

Key data: 630 mm, 230 mm, 5 kW

Gebr. Combined planing machine COLOGNE HK 63 exact year unknown Motor power 5.5 kW 2-Knife Shaft Strip Planer Knife Table height adjustment by handwheel Altitude display via dial gauge in the handwheel max. planing width: 63 cm Max. planing height: 230 mm 2 feed speeds: 10+16 m/min. Articulated pressure beams Link feed roller Steel Pull-Out Roller Length dressing tables: 210 cm Thickness table length: 120 cm Motor brake manually via selector switch Weight: 1,400 kg Manufacturer information Very good original condition! The machine from a 1-man workshop.

Type MB7023 Maximum working width 230 mm Minimum working width 20 mm Maximum working thickness 180 mm Minimum working thickness 8 mm Shaft diameter 40 mm Feed speed 5–30 m/min. Spindle speed 6000 rpm. 7 spindles B-4kw, R-5,5kw, L-5.5kw, T -7.5kw, T-5.5kw R-5,5kw, B-5,5kw Side motors of grinding brushes 2.2/2.2 kW Top motor of grinding brushes 2.2 kW Total power 52.2 kW Air pressure 0.2–0.3 mpa Width of side sanding brushes 200mm Width of top sanding brushes 300mm Transport dimensions 3750x1600x1500mm Weight 4200 kg Price 36880 Eur (EXW Jonava, Lithania)

Number of spindles: 9 St.Working width: 230 mmWorking height: 120 mmeinig Unimat 23, 8 spindles + universal spindle--------------------------------------------Width and height are motorized/controlledIncludes Haberkorn workpiece return systemMachine can still be viewed in operation for a short time!Spindle configuration--------------------------------------------Spindle 1: bottomSpindle 2: rightSpindle 3: leftSpindle 4: rightSpindle 5: leftSpindle 6: topSpindle 7: bottomSpindle 8: topSpindle 9: universalTechnical specifications according to the manufacturer – no guarantee provided!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St.Working width: 230 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 4 kWFeed speed: 6-24 m/min.LEADERMAC Type LMC 623 COMPACT Four-Sided Moulder--------------------------------------------Sold on behalf of a client!Working width (min. – max.): 15 – 230 mmWorking height (min. – max.): 10 – 150 mmWidth and height are motorized/controlled6 spindles, spindle diameter 40 mm, 6,000 rpmSpindle configuration--------------------------------------------Spindle 1: bottomSpindle 2: rightSpindle 3: leftSpindle 4: topSpindle 5: topSpindle 6: bottomTechnical specifications provided by the manufacturer – no guarantee!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0503 Brand: SAC - ITALY Model: RS 53 - CE Standard Automatic thickness planer for joinery workshops, furniture factories, custom furniture, sawmills, wood, composite materials, plastics - CE Standard Technical data Working width mm 530 Max working height mm 240 Min working height mm 3 Max depth of cut mm 8 N° 4 knives Feed speed mt/min 5 - 7,5 - 10 - 15 Motor Hp 5,5 Diameter of suction connection mm 140 Overall dimensions mm 930 x 1050 x 1100 h Weight kg 970

Capacity: 230 x 130 mm.Spindles: 7Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kWspindles 2, 3, 4 and 5 are 8000 tr/minstraight jointer on 2nd bottom spindleCardan shaft drivePneumatic pressuresIntermediate driven feedroller for short pieces0,8 m infeed straightening tablemanual bed lubricationSpindle diameter: 50 mm.5 driven rollers in tableFeed: 6 - 36 m/min, motor 7,5 kWmotor height adjustment

Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW– Fence / Near 11 kW – Top 7,5 kW – Bottom 5,5 kWSpindle speed 6000 rpmVariable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mmDriven table rollerMechanical/digital read-out Centralised lubrication CE sound/safety hoodInterior lightHopperfeed EM 11, upt to 60 cycles/minWorkpiece length: 350 to 3000 mmWorkpiece width: 20 to 230 mmWorkpiece thickness: 12 to 70 mmAir requirement: 8 bar, connection DN8Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/sTooling not included

Capacity: 230 x 130 mm.Number of shafts: 9Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kWKardan drivePneumatic pushersFront surface tableFeed rollers for short workpiecesManually operated pump for bed lubricationShaft diameter: 50 mm.Powered rollers in the tableFeed: 6 - 36 m/minMotorized height adjustment

width of the table: 400 mmlength of the table: 2450 mmfence can be tilted4 knive cutterblockmotor 3 kW

Maximum feed width: 800 mmMaximum feed height: 230 mmVariable feed speed: 8 - 20 m/minPlaning head with 4 bladesExtraction diameter: 200 mmMotor 5.5 kW

Useful width: 520 mmMax pass: 300 mm Motorised table rise and fallAnti-kick-back safety device4-knife cutterblockMotor 4 kW

Capacity: 180 x 100 mm.Spindles: 4Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kWMotorised thickness adjustment4 cutterblocks Chaindrive 6 - 12 m/minInfeed table 1m70. long

Capacity: 260 x 130 mm.Spindles: 5Shaft diameter 40 mmBottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kWCardan shaft drivePneumatic pressuresFeed speed variable 5 - 24 m/min, motor 3 kWMotorised height adjustment of top presssure beamInfeed table 2200 mm lengthtools not included

Four-sided planerWorking height: 740-750 mmMax working width: 305 mmMin working width: 50 mmMax workpiece height on 2 sides: 310 mmMax workpiece height on 4 sides: 160 mmMin workpiece height: 17 mmFeed speed steplessly adjustable: 10-60 m/minmotors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kWfeed motor: 7.5 kWmotor height adjustment: 1.5 kWspeed 5,500 rpmdriven top and bottom feed rollers

Capacity: 230 x 125 mm.Number of axes: 4Axis diameter 40 mmBottom 6.3 kW, right/left 7.5 kW, top 7.5 kWMobile axis for various widthsPneumatic pressersVariable feed speedMotorized height adjustment of the top barFeed table 2000 mm lengthKnife heads included

Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed tableIn the machine 4 driven feedrollersHardened table (with exception of the infeed table)Separate controll cabinet and electrical cabinetAutomatic bed lubricationPneumatic pressuresOutfeed table with height adjustment 0/0,5/1 mmSound enclosure with electromagnetic securityCapacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm)Feedspeed: 6 - 36 m/min, motor 7,5 kWNumber of spindles: 8Spindle diameter: 50 mmSpindle speed: 6000 rpmBottom 7,5 kW, outboard bearingFence 7,5 kWNear 11 kWFence 11 kWTop 15 kW, outboard bearing, straight jointerBottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm)Top 11 kW, table prepared to take wooden insertsBottom 11 kW, outboard bearing, straight jointer

Capacity: 230 x 120 mm.Spindles: 4bottom 4 kw fence and near 5,5kWtop 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kWVariable speed 5 - 22 m/minPneumatic pressuresInfeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood