planing machines used for sale (544)

Number of spindles: 5 St.Working width: 250 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-24 m/min.control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER-------------------------------LIKE NEW, showroom machine !- 5 spindles: bottom, right, left, top, bottom- Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm- Width and height motor-controlled:left spindle radialupper spindle axial- Feed carrier motor-controlled- Additional motor-controlled positioning:right spindle radial and axialleft spindle axial- working width 250 mmTECHNICAL DATA-------------------------------Working width (perimeter of tools 163 mm) 15 - 230 mmWorking height(perimeter of tools 163 mm) 10 - 150 mm(perimeter of tools 123 mm) 10 - 160 mmMin. workpiece length:single piece: min. 800 mmpiece by piece: min. 300 mmThe processing of the work pi ...

SPECIFICATIONS: Feed length: 1970 mm Working width: 230 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Direct drive / cardan (0.25 kW x 3 motors) Speed: 6000 rpm Installed power: 22.9 kW Voltage: 380 V Spindle configuration: I Bottom (4 kW) II Right - Left (7.5 kW), Left equipped with electronic control III Top (5.5 kW) equipped with electronic control IV Bottom (4 kW) EQUIPMENT: Complete with tools

Weinig Unimat 17 four-sided planer Working width 170mm Working height 140mm Number of spindles 6 Spindle arrangement Bottom 5.5kw Right 5.5kw Left 5.5kw Top 7.5kw Bottom 5.5kw Universal 5.5kw Adjustable heads Feed speed adjustable via variator 6-36m/min Drive on cardan shafts Feed motor 5.5kw Pneumatic material clamps Total power 41kw

Key data: 6 , 190 mm, 120 mm

SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)

Planer and moulder with grinding unit Position 1. Abricht Spindel Position 2. Right Vertical Spindle Spindle Position 3. Left Vertical Spindle Position 4. 2. Right Vertical Spindle Position 5. 2. Left vertical spindle Position 6. Upper Horizontal Spindle Position 7. Bottom Horizontal Spindle Position 8. Grinding unit at the top Position 9 Grinding Unit Bottom Position 10 Universal Spindle

Key data: 400 mm, 2100 mm, 3 St.

SPECIFICATIONS: Table dimensions: 2100 x 400 Roller with 3 knives EQUIPMENT: 01 Knife adjustment device 03 Spare blades

MARTIN T90 Four-sided crane with NC control and 6 spindles and swing axle (Left3) Specifications: Brand: MARTIN Type: T90 with 6 spindles incl. pendulum axle (left 3) Year of Make: 2023 A1 - Refurbished and Repainted M-No.: V239722 Operating hours: 5,962 hours Feed table: 2000 mm Table height adjustment: Max. Spahn name 10 mm Stop bar: Manual adjustment 10 mm Planing width: 22 - 260 mm (profiling width top 4 is 260 mm, spindle 5 & 6 is tool dependent) Planing thickness: 5 - 160 mm (profiling width right/left is 160 mm, spindle 5 & 6 is tool dependent) Planing shaft: 1st spindle, with max. 10 mm decrease, 260 mm, flight circle min. ø100 mm - max ø125 mm Calibration planing and contour shafts: 2 & 3 spindles (vertical spindles) max. 10 mm, clamping length 160 mm, flight circle min. ø100 mm - max ø125 mm Thickness shaft/upper shaft: 4th top spindle  ...

Key data: 630 mm, 250 mm, 8 kW

Hofmann D632 Thickness Planer Brand: Hofmann Type D632 M-No.: 2533 Year of manufacture 2005 Main motor 7.5 KW - 400 V Speed 5,000 tpm Knife shaft Z-4 Circle ø125 mm Planing width 625 mm Planing thickness 3.5 - 275 mm Spahn removal max. 8 mm Thickness table length 1,000 mm Feed rate 7-14 m/min. Weight 980 KG

SCM surface planer mod. Used F410 useful working width mm. 410 total length of the tops mm. 2610 Nr. 4 knives Year of manufacture 2000 EC

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

Key data: 5 , 120 mm, 230 mm

Planing and moulding machine Profimat 23 E Working width: 230 mm Working height: 120 mm Dressing table length: 2000 mm Spindle arrangement 1: Dressing 5.5 kW, 6000 rpm, 40 mm diameter 2+3 Left+ Right 7.5 kW, 6000 rpm, 40 mm diameter 4: Thickness 5.5kW, 6000rpm, 40mm diameter 5: Bottom 4kW, 6000rpm, 40mm diameter Feed motor: 2.2 kW Feed speed infinitely variable 0-24 m/min Milling heads with adjustment gauge Total power requirement: 27 kW Dimensions set-up: 3400 x 1650 x 1970 mm Machine weight, approx.: 3500 kg

A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible.

Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible.

Four-sided planer Weinig with glazing bead saw Type: P 23 Year of Make: 1995 Planing width 230 mm Planing height 130 mm 6 planing shafts + glazing bead saw Shaft arrangement 1 Bottom 4 kW 2 right-hand lifting spindle clocked with 3 Left 7.5 kW 4 Top-clocked shaft 5.5 kW 5 Bottom 5.5 kW Glass bead saw Spindle diameter 40 mm Right and left shafts are driven by 1 motor with manual Waxilit pump with distributor for extraction pipes fully equipped with planer heads as well as 4 additional milling heads good, ready-to-use condition

Number of spindles: 5 St.Working width: 230 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-24 m/min.Control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER -------------------------------LIKE NEW, showroom machine !- 5 spindles: bottom, right, left, top, bottom- Speed: frequency-controlled 4,000 - 6,000 rpm- Width and height motor-controlled:left spindle radialupper spindle axial- Feed carriage motorized adjustmentTECHNICAL DATA in Detail-------------------------------Working width (for tool diameter 125-163 mm): 15-230 mmWorking height (for tool diameter 125 mm): 10-160 mm(Tool diameter up to 163 mm): 10-160 mmMin. workpiece length:single piece: min. 800 mmpiece by piece: min. 300 mmThe processing of the work pieces is depending on thefollowing operating parameters:material, wood moisture, tools, diameter of the chip removaland f ...

x-travel: NA mmy-travel: NA mmworkpiece height: mmstroke length max.: 450 mmtable length: 450 mmtable width: 350 mmtotal power requirement: 1,7 kWweight of the machine ca.: tdimensions of the machine ca.: mShaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GRECON finger jointing line Ultra 4, Manufacture year 2002, single side shaping machine, with turn table, min/max infeed length 150/1000 mm, max. outfeed length 6100 mm, with glue system, Consisting of:, - Finger jointing machine, - Transport belt, - Tilt- and turn device, - Chain feeder, - Heavy duty double roller feed unit, - Integrated cut of saw, - Conti press, type A-12-6100, - Tooling, With Mixon glue pump, type 2453H/1 (year 2021)

WEINIG moulder, type Unimat 23E, Manufacture year 2005, Machine specifications:, - Planing width 230 mm, - Planing height 120 mm, - Cardan feeding, motor 3 kW, - Feed speed 6 – 36 m/min, Spindle layout:, 1. Horizontal bottom spindle, 5.5 kW, 2. Vertical spindle right, 11 kW, 3. Vertical spindle left (with no. 2), 4. Vertical spindle right, 5.5 kW, 5. Horizontal top spindle, 11 kW, 6. Horizontal bottom spindle, 5.5 kW, - Surface table 2500 mm, - Motor brakes, - Feeded table rollers, - Waxalite pump, - Spindle diameter 40 mm, - Incl. accessories

KÄLIN wide planer, type Industry-HQ 4-670 2AF-EX, Manufacture year 2011, Machine specifications, - Working width 60 - 650 mm, - Working height 30 - 310 mm, - Feed speed 6 - 36 m/min, - Feeding system, total 17.6 kW, Spindle layout:, 1. Horizontal spindle bottom, motor 18.5kW, 2. Horizontal spindle top, motor 22 kW, 3. Vertical spindle right, motor 15 kW, 4. Vertical spindle left, motor 15 kW, # 4-sides chamfering device, each 1.5 kW, - Upper part can be quickly adjusted with 6 lifting columns, - Driven feed rollers in the upper part of the machine, - Driven feed rollers in machine stand, - Vertical spindles with counter bearings, - Heavy duty outfeed unit with drive, - Feed speed with frequency converter, - Control panel with digital positioning controller for planing width and planing thickness, - Soundproof cabin

Key data: 4 , 23 mm, 10 mm

Exhibition machine! Working width (mm): 23 - 180 Minimum workpiece length (mm): 300 Feed speed (r/min): 6 - 12 Engine: Feed: 0.7/1.1 kW (1/1.5 HP); Horizontal spindle (single): 7.5 kW (10 hp); Vertical spindles (single): 7.5 kW (10 hp) Speed (r/min): 6000 Spindle ø (mm): 35 Feed table length (mm): 1700 Working height (mm): 10 - 105 Suction nozzle ø (mm): 120

Key data: 5 , 260 mm, 160 mm

Number of Spindles: 5 Spindle arrangement: u-r-l-o-u Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Working width adjustment: digital Working height adjustment: digital Feed speed: 20 m/min Table height constant: approx. 800 mm Bevel units: 1 Diameter of the suction nozzles: 140 mm Weight: 2500 kg Space requirement: 3650x1500x2000 mm Voltage/Frequency: 380V

SCM F5L planer Working width 500mm 4kw main motor 4-knife shaft Traditional knives Main fence adjustable at an angle up to 45 Table top length 2600mm

Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pulling roller clamps Electric pressure beam adjustment Tabletop lubrication system Year of production 1998

Key data: 520 mm, 1750 mm, 4 St.

Surface planing machine 520mm Planing width, support table 1750mm, removal table 1150mm. - Aigner strip planer stop - Angle stop 90° -45°

Key data: 500 mm, 230 mm, 5 kW

SPECIFICATIONS: Working width: 500 mm Working height: 230 mm Electric height adjustment 2-speed drive Roller with 3 knives Installed power: 5.5 kW Voltage: 380 V EQUIPMENT: 4 spare blades Knife Adjuster

Number of boring spindles: 4 St.Working width: 220 mmWorking height: 120 mmLength of the planing table: 2.000 mmFeed motor: 1,5 kWFeed speed: 4,5 - 27 m/min.total power requirement: 15,5 kwDimensions (L/W/H): 3.700 x 1.500 x 1.300 mmweight of the machine ca.: 1.600 kgturning speeds: 6.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 8 St.Working width: 20 - 230 mmWorking height: 8 - 120 mmLength of the planing table: 2.500 mmFeed motor: 4 kWFeed speed: 5 - 24 m/min.total power requirement: ca. 60 kwDimensions (L/W/H): mmweight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Planer Brand: Panhans Type: 335/20 New machine Technical data: - Planing width 510mm - Feed table length 1620mm - Delivery table length 1170mm - Total table length 2850mm - Blade shaft speed 5000 rpm. - Extraction nozzle Ø 160mm - Chip removal up to 8mm - Weight approx. 1,050 kg Motor power 5.5kW / 7.5PS Voltage 400V / 50 Hz Required space approx. 2900 x 1500mm Solid German mechanical engineering For dressing and joining, including hollow and pointed joint setting for planing widths up to 510 mm and max. Chip removal up to 8 mm Ergonomic working position directly on the blade shaft PANHANS solid steel blade shaft ø 125 mm with 4 pieces of Tersa reversible blade Finely planed machine tables, total table length 2850 mm Control panel above at eye level with digital display of chip removal, the current delivery table situation (neutral, hollow or pointed joint),  ...

Thicknesser Brand: Panhans Type: 436/100 New machine TECHNICAL SPECIFICATIONS Planing width 630 mm Planing height 3 - 300 mm Chip removal max. 8 mm Thicknesser table length 1100 mm Blade shaft speed 5000 rpm Motor power feed 0.55 kW / 0.8 PS / 0.75 kW / 1.0 PS Extraction nozzle Ø 160 mm can be used on the left or right Feed speed 7 + 14 m / min Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 1050 kg TECHNICAL DESCRIPTION Solid German mechanical engineering For thickness planing for planing widths up to 630 mm and planing heights from 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel knife shaft Ø 125 mm with 4 pieces of Tersa reversible knives Pendulum mounted feed rollers Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and safe workpiece feeding With sectional pressu ...