saws used for sale

cutting diameter: / mmsaw band length: / mmcutting width: / mmtotal power requirement: kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 750x540 mm: rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm: 4 kW: 0.12 kW: 3000 mm: 1300 mm: 2150 mm: 2445 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frame3° inclined saw banduser manual in GERMAN or ENGLISH(the vertical hydraulic clamping shown on the photos ist op ...

Year: 2011 - technically efficient, ready to work – after full service - Cutting length: 6000 mm - Discs: 420 mm (bottom cutting) - E355 control - Digital angle indicator - Pneumatic angle adjustment 45-90 degrees - Cutting to outside dimensions, without correction - Cooling and lubrication system - Roller feeder - Vertical and horizontal pneumatic clamps - Automatically lowered and raised disc guards

Machine ready for transport

Automatic wave saw Saw blade 315mm max. shaft diameter 90mm Speeds 9 - 45 rpm Motor 3.0KW See pictures Condition: unchecked (6)

weight of the machine ca.:1750 kgsawing motor:2,2 kWtotal power requirement:5 kWcutting speed:17 - 90 m/mincutting diameter:320 mmcutting range max.:320 x 320 mmsaw band length:4.930 x 34 x 1,1 mmfeed length:max 9x 600 mmdimensions of the machine ca.:2,6 x 2,4 x 1,40 mBandsaw automatic, straight cut,min. cutting diameter 10mm,min. cutting length 6mm,min. offcut 15mm (automatic 80mm),max. weight of material 400kg/m,coolant box 60l, pump 16l/min,clamping pressure 20-60bar,dimensions:chipconveyor 2.400x 950mmroller track 2.200 x 950mm,5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual,

Cutting diameter 250 mm Saw blade length 3660 x 27 x 0.9 mm Cutting width 400 mm Motor 1.0 KW Engine speeds: 1400 rpm Cutting speed 20 - 70 m/min Machine weight approx. 0.5 t Space requirement approx. 1.55 x 1.0 x 1.2 m

cutting diameter:330 mmsaw band length:4680 mmsawing motor:4 kWcutting speed:15 - 100 m/minsquare:330 x 500 mmcutting length min.:10 mmcutting lenght max.:850 (-9999) mmtotal power requirement:7,7 kWweight of the machine ca.:5,5 tspace requirements approx. LxWxH:2,7 x 2,35 x 1,7 mAutomatic horizontal bandsaw, hydraulic,material dimension max.:dia 330 mm,rectangular 330 mm x 500 mm,dimension of bandsaw 4680 x 34 x 1,1 mm,incl. roller track

High-performance fully automatic band saw machine with - Coolant system -Documentation Cutting diameter 260 mm Cutting width 400 mm Cutting area at 90 degrees: flat 400 x 260 mm Cutting area at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: around 260 mm Belt speed 17 - 110 m/min Motor power 3.5 kW Saw blade dimensions 3830 x 25 x 0.9 mm Machine weight approx. 1.3 t Space requirement approx. 2.1 x 2.0 x 1.6 m

cutting diameter:320 mmsaw band length:3280 mmcutting width:320 320 mmtotal power requirement:3,8 kWweight of the machine ca.:1150 t- columm guidance- roll-conveyer 4000mm / 1000 mm lenght- cutting speed 15 - 105 m / min- mitre cutting up to 60°

2000W

Demonstration machine Machine for cutting tubes and profiles made of steel, light metal, plastic, non-ferrous metal and composites. Saw blade diameter 355 mm Cutting range at 90 degrees: around 115 mm Cutting area at 90 degrees: square 120 x 106 mm Cutting area at 90 degrees: flat 102 x 197 mm Saw blade holder diameter 25.4 mm Connection voltage 230 V Total power requirement 2.3 kW Machine weight approx. 28 kg Dimensions LxWxH 0.6 x 0.35 x 0.45 m Condition: never used / new (5)

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand-Roller stand: Roller stand for hacksaw, band saw, cold circular saw-Roll: Ø 65 x 240 mm-Dimensions: 325/65/H520 mm-Weight: 8.7 kg

Description: -Mitre cuts up to 60° left -Cutting speed 35 / 70 m / min. -Vice with quick-release device -Saw blade guide made of carbide -Belt tension control -Electr. Automatic cooling Auto-Cut System = 3 Stages System -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch -High-speed lowering of the saw frame from the resting position to the workpiece, then switch to normal saw feed -Manual operation Cutting diameter 220 mm Saw blade length 2455 mm Table height 850 mm Cutting width 230 mm Cutting speed 35 + 70 m/min Saw blade dimensions 2455 x 27 x 0.9 mm Cutting capacity at 60° around 90 mm Cutting capacity at 60° square 90 mm Cutting capacity at 60° flat 90 x 100 mm Cutting capacity at 45° Around 150 Cutting capacity at 45° square 150 Cutting capacity at 45° rectangle 150 x 210 Cutting capa ...

Unused exhibition machine! Semi-automatic double mitre band saw with: - Hydr. Clamping vice - Material height sensor - Cutting monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy mitre adjustment - Quick-release vise can be moved - Quick-release lever - Automatic cooling Cutting range at 90 degrees: around 250 mm Cutting range at 90 degrees: square 210 mm Cutting area at 90 degrees: rectangle 290 x 210 mm Saw blade length 2,965 x 27 x 0.9 mm Table height 940 mm Belt speed 37 / 74 m/min Total power requirement 1.1/1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m Condition: functional

Including 2x roller conveyor dimensions (700x1250x1000mm)

Connected load: 0.9kW, weight: 170kg, including instruction manual, three saw blades for V2A and five saw blades for steel, the lowering hydraulics should be overhauled.

cutting diameter:520 mmsaw band length:7239 x 50 mmcutting width:520 mmsawing motor:5,5 kWcutting speed:20 - 130 m/mintotal power requirement:9,5 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3,5 x 2,2 x 2,1 m- Multifeed device- infeed roller stand- chip conveyor- automatic operation

Band Saw Automatic - Material feed up to 400 mm, multiple times possible; max 10 x - Coolant device - Piece counter - Material support bracket Cutting diameter 320 mm Cutting speed 20 - 100 m/min Cutting width 320 mm Multiple feed length 1 x 400 mm Saw blade length 3660 x 34 x 1.1 mm Total power requirement 2.5 kW Machine weight approx. 0.95 t Space requirement approx. 1.8 x 2.0 x 1.5 m

cutting diameter:400 mmsaw band length:5090 x 34 mmcutting width:1,1 mmcutting speed:20 - 110 m/mintotal power requirement:4 kWweight of the machine ca.:2 tdimensions of the machine ca.:2,4 x 2,5 x 1,9 mdouble column guided bandsaw for with multiple feedinf. variable cutting feedhydr. belt tentioningroller conveyor for material handlingchip conveyor and coolant attachment

Saw blade diameter 400 mm Cutting diameter 125 mm Cutting length 650 mm Cutting speed 14 - 30 - 45 m/min Total power requirement 5.0 kW Machine weight approx. 1.2 t Dimensions L x W x H 2.0 x 1.0 x 1.6 m

incl. roller conveyor incl. replacement saw blades Cutting Capacity & Performance Max. cutting range (90°): Round material Ø 303 mm (or 305 mm depending on the source) Rectangle/Square 360 × 305 mm At 45°: Round Ø 265 mm, Rectangle 265 × 300 mm At 30°: Round Ø 175 mm, Rectangle 175 × 300 mm Saw blade speed: 20–90 m/min Saw blade dimensions: 3,830 × 25 × 0.9 mm or 3,850 × 27 × 0.9 mm Working height: approx. 700 mm Motor power: approx. 1.1 kW (mains voltage 400 V) The KB 360 G is a solid semi-automatic metal band saw with a robust, hydraulically controlled feed, versatile in cutting angles (0°, 30°, 45°, 90°), suitable for round and square material up to Ø 305 / 360 mm. Ideal for smaller series and workshops with medium demands.

Roller diameter (impeller): 420 mm Projection width (throat): approx. 410–415 mm Projection height (max. cutting height): approx. 265–295 mm Table size: approx. 600 × 600 mm Table tiltable: ±15° left / ±30° right Table height from the floor: approx. 1 020 mm Band saw blade length: 3 150 – 3 260 mm Saw band width: 3 – 16 mm Belt speed: 12 – 375 m/min (8 stages) Motor power: 1.1 / 1.7 kW, 380 V / 50 Hz

100 % before loadingwarranty:none

Max cutting 90° 260mm Max cutting 45° 260mm

Serial number: AB1190Power: 3.46 kWWeight: 1000 kgDimensions: 700 x 2100 x 1810 mmCondition: Pre-ownedTechnical details:•    Blade dimensions: 4780x34x1.1 mm•    Variable speed: from 22 to 90 m/min•    Vise capacity:o    At 0°: 510 x 330 mmo    At +45°: 320 x 310 mmo    At +60°: 240 x 170 mmo    At -45°: 320 x 310 mmo    At -60°: 240 x 170 mm•    Controlled descent

cutting diameter:520 mmsaw band length:7239 mmcutting width:520 mmsawing motor:5,5 kWcutting speed:20 - 130 m/mincutting width at rectangle material:520 mmtotal power requirement:9,5 kWweight of the machine ca.:3,8 tMachine with multi feed devicechip conveyorinfeed roller stand