saws used for sale (1,263)

cutting angle: 90 degrees,blade diameter: 650 mm,motor: 9.2 kW,45-degree clamps,machine weight - 1200kgautomatic feeder,the machine includes a roller conveyor. Auction-ID: A7-49398-50

Well-functioning automatic crosscut saw complete with saw, sharpener and two extra saw blades, machine is working well! Auction-ID: A1-47357-10

- technically efficient, ready to work – after full service - blade diameter: 350 mm - cutting length: 430 mm - cutting height: 135 mm - horizontal angles: 45°-90°-25° - machine base

workpiece height: 670 mm |throat: 785 mmroll diameter: 800 mmcutting speed: 26- 2000 m/mindimensions of saw-band: 6500 mmpower requirement: 11 kWtable-size: 900 x 900 mmrange L-W-H: 2,24 x 1,1 x 2,9 mmweight of the machine ca.: 2,3 tMachine from a university. Very good conditionEquipment:- welding station- grinding stonesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49309-150

Auction-ID: A1-49309-23

Auction-ID: A1-49309-13

Auction-ID: A1-49309-66

Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device Roller conveyors and length stops in different lengths on request

cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmcapacity 45 degrees: flat: 220 x 200 mmcapacity 45 degrees: round: 230 mmcapacity 45 degrees: square: 200 x 200 mmcapacity 60 degrees: flat: 140 x 100 mmcapacity 60 degrees: square: 100 x 100 mmcapacity 60 degrees: round: 150 mmvice: 285 mmturning speed range:: 36/72 m/mindimensions of saw-band: 2950x27x0,9 mmControl: total power requirement: 1,5 / 1,8 kWweight of the machine ca.: 460 kgdimensions of the machine ca.: 1150 x 1970 mmFeatures:- Robust electro-hydraulic semi-automatic band saw (INDUSTRIE)- With miter cuts from 45° right to 60° left Mitre adjustment via a large turntable- MEP EVO microprocessor control for managing all functions Front right, swiveling- Optional manual or automatic lowering of the saw frame Stepless adjustment of the saw frame lowering - Saw blade gui ...

saw blade diameter: 550 mmUnder-table saw for aluminum and PVCHydropneumatic saw blade feedTwo-hand operationMinimum-quantity lubrication systemTable rotates on both sides, with locking positions at +/-45° and +/-60°Mitre cuts up to 60° on both sidesFull protective guardvery good condition!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-47168-366

Cutting speeds: 30/60/130/260m/min, mains connection: 380V/50Hz three-phase, rated supply current: approx. 7.5A, upstream fuse: 20A slow-blow. An on-site inspection is possible.

This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine.

Circular Metal Saw manufactured in 2017. This STEIN BAK10-D features an electrical height adjustment system and individually adjustable caterpillars and saws. It has a maximum saw blade diameter of 400 mm and a regulated saw blade nominal speed ranging from 500 to 4200 rpm. If you are looking to get high-quality cutting capabilities, consider the STEIN BAK10-D machine we have for sale. Contact us for further details.

Serial number: 22602005Workpiece diameter: 10 -76.3 mmMaximum loading length: 6000 mmMaximum loading weight: 2160 kgSaw blade diameter: 285 mmPower: 7,5 kW Auction-ID: A7-40851-1

cutting diameter: 305 mmsaw band length: 3370 mmcutting width: 350 mmdimensions of saw-band: 3370 x 27 x 0,9 mm: 305 mm: 260 mm: 350 x 200 mm: 250 mm: 230 mm: 230 x 200 mm: 175 mm: 155 mm: 170 x 100 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 600 kgdimensions of the machine ca.: 1700 x 1500 x 1950 mmFeatures:- Semi-automatic operation via automatic saw frame lowering- Miters: left 60°, right 45°- 2 speeds: 40 and 80 m/min- Solid material support table- Operatorâs manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ADIGE Model No.: CM 601 Condition: Used Stock number: 9418 Hours: 14611 h Tube diameter: 12-35 mm Maximum rod length: 4500 mm

Max. cutting length: 2,450 mm

Technical data Manufacturer: KNUTH Model: HB 300C Type: Horizontal metal band saw machine Configuration Workpiece clamping device Material stop Machine Light Control panel with push buttons, selector switch and emergency stop Saw Blade Covers Integrated drip tray Auction-ID: A7-49302-65

Technical data Manufacturer: BEHRINGER Type: HBP 260 A Year of Make: 1989 Configuration Horizontal metal band sawing machine with material feed via rollers. Hydraulic workpiece clamping and feed device. Control panel with push buttons, selector switches, emergency stop and main switch. Pressure gauge for pressure display. Protective hoods on both sides of the sawing area. BEHRINGER operating instructions available. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-159

Wheel diameter: 600mm, working height: 955mm, max. cutting height: 140mm, clearance height: approx. 5mm-300mm, clearance width: max. approx. 650mm, max. saw blade length: 5600mm, saw blade width: 8mm-25mm, max. saw blade thickness: 0.65mm, max. band speed: 1640m/min, conveyor belt speed: 0,5m/min - 5m/min, conveyor belt width: 650mm. Overall length with conveyor belt: 2820mm, overall width: 2550mm, overall height: 1800mm, machine weight: approx. 700kg. Documentation available. Inspection possible by arrangement.

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960  ...

BEKA-MAK BMSY 440 DGH metal band saw was built in 2020 in Turkey by BEKA-MAK MAKİNA SAN. VE TİC. A.Ş. The machine is designed for the precise cutting of workpieces with circular, rectangular and square cross-sections at angles in the range from +60° to -60°. High machining accuracy, combined with a number of well-proven technical solutions, makes the machine ideal for use in professional industrial plants and workshops. The BEKA-MAK BMSY 440 DGH is characterised by a stable design based on a robust, rotating arm. Cutting is performed using a 5200 mm saw blade, whose precise guidance is ensured by guides with rollers and carbide inserts. The movable coolant tank cooperates with an electric pump, supplying coolant to both band guide units. A hydraulic vice ensures the workpiece is held securely in place during cutting. The BMSY 440 DGH semi-automatic band saw is offered with a comp ...

cutting width: 280 mmCutting height: 150 mmMotor output: 2 x 4,0 kWsaw blade: 420 x 30 mmCutting length: 6000 mmspeeds: 2800 U/minair pressure: 7 barweight of the machine ca.: 1750 kgdimensions of the machine ca.: 7550 x 1600 x 1450 mmFurnishing:- Control E 255- Extraction ESTA DUSTOMAT-22 Bj. 1998- roller conveyor- 2x saw blade 120 x 4.0 x 30 Z96The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-40420-496

FEEDSTOCK TUBE  external diameter min.: 10 mm  external diameter max.: 101 mm  length min.: 150 mm  lenght max.: 3000 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 17200 mm  space requirements -front/back-: 5930 mm  total weight approx.: 13000 kgCutting  + brushing  + automatic measuring  + automatic washing and drying  + automatic drying- Number of hours: 25.833- Automatic loader for master tube bundles up to 8000 mm.- Square tube diameters: 10x10 up to 100x100mmProcess: The mother tube, up to 8 meters long, is automatically loaded into the cutting unit, where it is cut to the specified length. It then automatically passes to the deburring unit, followed by the measuring unit, which rejects pieces outside of tolerance and allows the acceptable pieces to proceed to the washing and  ...

cutting diameter: 300 mmsaw band length: 3900 mmtotal power requirement: 3 kWweight of the machine ca.: 0,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 45210 €: 863.51 €: Schwenkrahmen : 3120x27x0,9 mm: 20-100 m/min: 280 mm: 240 mm: 310x240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 2800 mm: 2000 mm: 1820 mm: 1200 kgCNC control with 7", touchscreen for following functions:feeding length, pieces and rotation of the bow for mitre cuttingautomatic feed 1000 mm / strokevariable cutting pressuremachine with speed variatorcoolante equipmentmotorizes chip brushchip conveyerautomatic saw blade breakage detectionhydraulic clamping vicesRecommended max. diameter of solid material in automatic mode: 150 mmuser manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.