Horizontal Bandsaws used for sale (32)

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

Auction-ID: A1-50750-33

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

Saw adjustable in degrees Auction-ID: A1-50750-10

Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...

Variable snelheid____ with additional saws ____ conveyor 1 Auction-ID: A3-46133-2835

Technical data: - Cutting range at 90° around 260 mm - flat 450 x 240 mm - Cutting range at 45° around 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - Saw band dimension 3660 x 25 x 0.9 mm - Cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 0.8 kW - Coolant device - Space requirement approx. W 2100 x H 1200 x D 1000 mm - Weight approx. 500 kg

Auction-ID: A3-46133-2836

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

In fully functional condition with additional parts. Auction-ID: A3-46133-17280

Technical details Type: Horizontal metal band saw Configuration: - Hydraulic saw bow - Continuous metal-cutting band saw blade - Hydraulic feed cylinder - Dual hydraulic workpiece clamping system - Adjustable material feed carriage - Feed screw adjustment - Coolant lubrication system with flexible nozzle - Coolant collection tray - Separate electrical control pedestal - Heavy-duty cast-iron frame Application: - Cutting steel bars - Cutting tubes and pipes - Cutting structural profiles - Cutting solid stock - General metal fabrication Construction: - Hydraulic gravity-feed operation - Automatic cutting cycle - Integrated hydraulic power unit Dimensions: - Length: Approx. 2400 mm - Width: Approx. 1600 mm - Height: Approx. 1700 mm Weight: Approx. 1400 kg Condition: Used Observed condition: - Machine appears structurally complete - Saw head and hydraulic cylinders installed - Dual hydraulic  ...

Saw blade length: approx. 2.65 m Saw band width: approx. 10 mm Connection: 220 V Frequency: 50/60 Hz For more details, see photos. Auction-ID: A7-50677-69

Flatbed trailer mounted Auction-ID: A1-50076-452

Technical data Manufacturer: BEHRINGER Type: HBP 260 A Year of Make: 1989 Configuration Horizontal metal band sawing machine with material feed via rollers. Hydraulic workpiece clamping and feed device. Control panel with push buttons, selector switches, emergency stop and main switch. Pressure gauge for pressure display. Protective hoods on both sides of the sawing area. BEHRINGER operating instructions available. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-50403-159

Hydraulic band saw machine with- material feed single 1000mm- saw blade tension motorized- emergency stop device- replacement saw bladescutting diameter 420 mmsaw blade length 5744 x 1.3 x 41 mmcutting width 420 mmcutting speed 15 - 110 m/mindrive saw blade 7.5 kWmachine weight approx. 3.5 tspace requirement approx. 2.9 x 2.4 x 2.1 m Auction-ID: A7-50523-705

Double mitre band saw- infinitely variable speed- mitre cuts up to 60° left and 45° right- vise with quick-release device- belt tension control- electr. Automatic cooling Automaticcutting diameter 235 mmSaw blade dimensions 2645 x 27 x 0.9 mmCutting width 280 x 190 mmCutting speed 0 - 90 m/minCutting capacity at 60° round 120 mmCutting capacity at 60° Square 120 mmCutting capacity at 45° Round 190 mmCutting capacity at 45° Square 170 mmConnection voltage 230 voltsTotal power requirement 1.5 kWMachine weight approx. 290 KgDimensions L x W x H 1.2 x 0.8 x 1.2 m Auction-ID: A7-50523-923

Hydraulic band saw machine with- NC control SIMATIC OP17- material feed single 600mm- max. programmable up to 6000mm- hydr. Saw band tension (36 - 40bar)- motor. Chip conveyor- Emergency stop device- feed roller conveyor 4mCutting diameter 360 mmSaw blade length 4870 x 41 x 1.3 mmCutting width 360 mmCutting speed 11 - 110 m/minDrive saw blade 4.0 kWHeight of workpiece support 800 mmMachine weight approx. 2.1 tDimensions approx. 2.3 x 1.9 x 2.2 m Auction-ID: A7-50523-708

Fully automatic band saw control Minipos 807 chip conveyorCutting diameter 420 mmSaw blade length 6300 x 41 x 1.3 mmCutting width mmTable height mmProfile size - max. mmCutting speed 10 - 130 m/minSaw blade length 4870 x 27 x 0.9 mmTotal power requirement 9.0 kWMachine weight approx. 3.4 tSpace requirement approx. 3.5 x 2.35 x 2.1 m Auction-ID: A7-50523-830

Automatic lowering. Left and right absent. Demo model; unused! Auction-ID: A1-40982-149

Double mitre metal band saw with Pehu 550 control With inlet roller conveyor dimensions approx. 155x73 cm And removal roller conveyor approx As well as wooden stairs Auction-ID: A1-50251-21

Technical data Manufacturer: Behringer Type: HBP 220 Design: horizontal metal band saw machine Dimensions L × W × H: approx. 1,900 × 1,100 × 1,800 mm Weight: approx. 1,500 kg Configuration With workpiece clamping device, saw blade protective covers, pressure indicators, adjustable saw feed, separate control console with push buttons, main switch and emergency stop as well as machine light. Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-50403-16

Automatic lowering. Left and right absent. Demo model; unused! Auction-ID: A1-40982-150

Controllo touch KASTO BASIC CONTROL Auction-ID: A7-50204-18

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-50208-216

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-50208-121

Sheet length: 5600 mmMachine number: 83509Table dimensions: 900 x 900 mm Auction-ID: A7-49089-177

Machine number: 831097Blade length: 5600 mmTable dimensions: 900 x 900 mmincl. lot of saw blades Auction-ID: A7-49089-524

Machine number: 1042455Cutting length: approx. 3000 mmincl. right roller conveyorRoller conveyor length: approx. 2000 mmRoller conveyor width: approx. 350 mmRoller conveyor left Length: approx. 3000 mm and width: 350 mm Auction-ID: A7-49089-156

including: infeed and outfeed roller conveyors: dimensions: 1x L4640 mm, 1x 5370mm, 4x L2160 mm, roller length: 495mm. including 1 roller conveyor segment in hall 1 and parts Auction-ID: A1-49889-20

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-50066-372

cutting diameter: 360 mmsaw band length: 6.300 mmcutting width: 700 mmtable height: 800 mmtotal power requirement: 14 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: mAutomatic Horizontal Band SawCutting Capacity at 90° (Round): Ø 360 mmCutting Capacity at 90° (Rectangular): 700 x 340 mmCutting Capacity at 75° Mitre (Left & Right):Ø 340 mm / 650 x 340 mmCutting Capacity at 60° Mitre (Left & Right):Ø 340 mm / 600 x 340 mmCutting Capacity at 45° Mitre (Left & Right):Ø 340 mm / 400 x 340 mmMaximum Cutting Diameter: 360 mmMaximum Cutting Width: 700 mmMaximum Cutting Height: 340 mmMinimum Cut-Off Length: 35 mmMinimum Workpiece Size: 10 x 10 x 10 mmRemnant Length (Manual): from 10 mmRemnant Length (Automatic): from 160 mmBlade Tension: 85 barCoolant Tank Capacity: 150 lBlade Speed: 19 – 130 m/minMain Drive Motor: 5.5 kWHydraulic Pump Motor: 5.5 kWCoolant Pump Motor ...

: 325 mm: 4380 mm: 400 mm: 325 mm: 400x325 mmdimensions of saw-band: 4380x34x1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.