paper converting: die cutters used for sale (175)

IBERICA JRK 105 with Blanking year 2000 A DIE-Cutting press of size 75 x 105 cm (29 517 Hours) Including : Stripping and Blanking Station, NON-Stop Feeder, Control and Pull Lay System, Mini. Paper thickness 90 g/m2, Max. Cardboard thickness 1,5 mm, Max. corrugated 3 mm, Chases and Frames, 300 Tons Cutting Pressure, Speed 8 500 S/Hours. In good Condition, Immediately available

BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)

Bobst SP 142 E, Year 1992, Max.Size: 1020x1420 mm, Min.Size: 500x700 mm, Max.Speed: 6500 Sh/h, Max.Cutting force: 600 T, Centerline, Quicklocksystem

- corner rounding punch - manual operating - floor model

Size: 920×1300 mmEquipments:Maximum sheet size 920×1300 mm, minimum size 560×1300 mmopening width within frame 920×1310 mm, maximum die size 910×1300 mmmaximum die-cutting area 900×1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mmmaximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/hinfeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h.Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

With patented MULTIFORCE hub connection system!, The punching press automatically adjusts the cutting force to the size of the punch tool., It does not matter how resistant or thick the material to be cut is., Cutting table: 1,000 x 500 mm, Reach: 370 mm, Maximum cutting capacity: 25 t – 245 kN, Dimensions: 1.000 x 1.140 x 1.710, Net weight (with oil): 1.020 kg

A digital roll label color printing machine Xeikon including a Hunkeler unwinding module is available. Resolution X/Y: 1200/3600dpi, max. print width: 322mm, material width range: 200mm-330mm, max. repeat length: 55m, max. printing output: 380m²/h, material weight range: 40g-350g/m². Unwinding unit Hunkeler UW6-C 7199, year of manufacture: 2011, max. roll diameter: 1370mm, web width: 520mm, web speed: 220m/min, max. roll weight: 600kg. Documentation available. An on-site inspection is possible.

Martin 924 Midline Casemaker, Year: 1991, Max.Size: 2400x1200 mm, Min.Size: 750x340 mm, Max.Speed: 15000 Sh/h, 3 Color, Slotter, Rotary Diecuttung, Foldingstation, Counter Ejector, Taper, Prefeeder Packfeed, Mosca Strapping machine , Year 2009, in production

KAMA TS 105 / HFS 105 Year 2007 Diecutting and Hotfoil Sheet size : 74 x 105 max. / 33 x 48 min. Cardboard thicknesss: 130 - 1500 g/m² (1.8mm) Max. pileheight feeder : 1150mm Max. pileheight delivery : 880 mm Features: Mabeg Feeder Digital control Sheet allignment KAMA HFS 105 hot foil unit

Includes 1 punching tool / 2:1 round hole Machine Cycle Speed: 60 strokes per minute Working Modes: Punching tool only: for standard work (plain paper) Punching tool with separator: difficult work (with cardboard) Production Speed: Depending on the size and condition of the paper to be punched, but lower than the maximum cycle speed. Tool Change Mode: Manual mode and duration approximately 45 seconds Format Change Mode: Manual mode and duration less than 1 minute Maximum punching thickness: 0.7 mm (equivalent to approximately 7 sheets of 80 g/m²). Maximum hole diameter: 8 mm Paper weight: 80 to 250 g/m² Minimum sheet size: 138 x 138 mm Maximum sheet size: 330 x 300 mm Power supply: 220 – 240 V, 50/60 Hz Technical specifications according to the manufacturers specifications (without guarantee)

Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then

Rotary die-cutting machine Maximum sheet size: 915 × 640 mm Minimum sheet size: 250 × 420 mm Maximum die-cutting format: 915 × 626 mm Die-cutting start: 14 mm - TouchScreen control Siemens S7/1500 with Siemens servo motor - Anti-static device Kersten” DC102 F-K in feeder and delivery - Electronic side lay control - Foil delivery with fan control - Variable sheet brake - Low-pile delivery

Bobst Sprintera 106 PER - with PowerRegister, Jahr 2003, Paper_ Cardboard_ Corrugated, From 70 g/m2 250 - 2000 g/m2, E flute and B flute up to 4 mm, Sheet size max. 1060 x 760 mm min. 400 x 350 mm, Die Cutting with gripper max. 1060 x 745 mm, Embossing max. 1060 x 740 mm, Gripper size from: 9 - 17 mm, The cutting knives height 23.8 mm, Embossing height 6.35 / 7 mm, Pressure 2.5 MN max., Speed (sh/h.) max. 12,000, Pallet height max. 1600 mm., Inclusive : - Power Register -, Height 60cm - Quicklock System, Centerline

Bobst SP 104 ER,, Year 1996, Max.Size: 1040x740 mm, Min.Size: 400x350 mm, Max.Speed: 8000 Sh/h, Max.Cutting force: 250T, Max. Thickness Corrugated board: 4.0 mm, Max.Paper gr/m: 2000 gr., Centerline, Quick-Lock system, Micrometer adjustment on the counterplate, Safety clamps for chain blocking, Non-Stop conveyer + Feeder, Chase changer

Bobst SP 142ER,, Year 1985, Max.Size: 1420x1020 mm, Min.Size: 700x500 mm, Max.Speed: 6000 Sh/h, Max.Cutting Force: 600 T, Centerline, Quicklock system, With tool separation station, Between-bow inserter and pre-taping device,, Working platform,, - 1 x preparation table for external tool preparation, - 4 x frames for breakout molds, - 4 x closing frames for punching tool, - 4 x Rescue vehicle

Bobst SP 102 CER, Max.Size: 720x1020 mm, Min.Size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max.Cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

hoogte vijfde wiel, Max.Size: 800x1120mm, Min.Size: 380x450 mm, Max.Speed: 6500 Sh/h, Jahr 1974, Centerline, Quicklock system, in production

Inline - BGM 3600, Jahr 1989, Max.Size: 3600x1600 mm mit Skipfeed: 3600x2100 mm, Min.Size: 1200x600 mm, 2 Color Printing Unit, 2x Sloter, Rotary Diecutting, Folding gluing, Taper, doublehead- Stitcher, Strapping machine, Stacker

Bobst SP 102 CER, Max. size: 720x1020 mm, Minimum size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max. cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

Casemaker DE Pack QYKM-1400x2900, Year 2023, Max.Size: 1400x2600 mm, Skip feeding area: 2180x4000 mm, Min.Size: 350x750 mm, Max.Speed: 200 pcs/min., 4 Color Flexo, Rotary Diecutting, vibration, Stacker

Bobst SP 142 ER, Year 1987, Max. size: 1020x1420 mm, Min. size: 700x520 mm, Max. speed: 6000 Sh/h, Max. cutting force: 600 T, Centerline, micrometer adjustment, in production

YAWA TYM 790 - Hotfoil and Die-Cutting machine, Year 2015, Max.Size: 790x590 mm, Min.Size: 310x210 mm, Max. hot stamping size: 750x520 mm, 3 individually adjustable heating zones (3 separately adjustable heating zones), 3x longitudinal foil production

Bobst SPO 1575 + 2 Color Flexo Printing Unit, Jahr 1994, Max.Size: 1575x1075 mm, Min.Size: 600x400 mm, Max.Speed: 4500 Sh/h, Max.Cutting force: 350 t, Flexo Printing Unit year 1974

RABOLINI F OVERHOLDER STANZTIEGEL, Format 1650 x 1200mm, MODEL F –, MACHINE FEATURES –, • Rabolini Model F Hand Stamping Die/ Rabolini Model F Manual Press, • Max. format 1650 x 1200mm/ Max. format 1650 x 1200mm, • Single-cycle push-button operation/ Single cycle push button operation, • Automatic lubrication/ Auto lubrication, • New electrics / New electrics, • Touch-sensitive front edge protection/ security, • Side fence guarding with interlocked tables/

ETERNA PE 1620 SA - ELITE, Year 2012, Max. Size: 1620 x 1200 mm, Max. cutting force: 400 T, Max.Speed: 3500 Sh/h, Centerline, QuickLock system, Chase loader

Wook IL Automatic Flatbed Punch WTNS-SSF 2500, Max. size: 2500 x 1500 mm, Maximum speed 1600 arcs/hour, Max. punching force 600t, 400V, 50Hz, Year of manufacture 2008, Prefeeder, fully automatic, RF technology, MFS 2500 HBL, Model 2516, Max. sheet format 2500 x 1650mm, Min. sheet format 600 x 450mm, Maximum speed 13200 arcs/h, Max. stack height 2400mm (min. 500mm), Maximum stacking weight 2000kg, 400V, 50Hz, Year of manufacture 2011