other food machines used for sale (998)

Used complete powder plant existing out of evaporator (4-effect, TVR), high pressure pump (homogeniser) and spray dryer., Previously used for whole milk powder (WMP). Line was running an input of ± 280.000 liters whole milk per day and an output of ± 28.000 kg of WMP per day., Still mounted inside the factory., The main components of the line:, - Evaporator, 4-effect, TVR, Manufacturer: Tebel - Van der Ploeg, Type: Falling film evaporator, Stages: 4-effect (stage 3 and 4 are later on divided in 2 different stages for a better heat transfer, 1-2-3ab-4ab), Tube diameter of all stages: 35 mm, Pre-heater, Year: 1975, Long and short holding tube, Capacity input for whole milk: ± 13.000 liter per hour (± 11,2% TS), Capacity output for whole milk: ± 3.000 kg per hour (± 48% TS), Capacity input for skim milk: ± 14.500 liter per hour (± 8,8% TS), Capacity output for skim milk: 3.000 ± li ...

Complete industrial margarine production line with a nominal production capacity of approximately 1.500 kg of table margarine per hour with a work product pressure up to 120 bar. The processing tanks and process design is made by GEA. The High Pressure Pump, Crystalliser and Pin Rotors are made by Gerstenberg Schröder / SPX - Perfector. The consumer packaging machine is made by Oystar Benhil Ecopack. The entire line is still installed in its original position at the factory in India, offering an excellent opportunity for inspection and evaluation in its existing production environment., Fat spreads consist of two primary phases: a water phase and a fat phase. They are therefore classified as water-in-oil (W/O) emulsions, in which the water phase is finely dispersed in the form of small droplets throughout the continuous fat phase. Depending on the intended application and required produ ...

The Alfa Laval SRU6/260/LS is a robust positive displacement lobe pump designed for the gentle and efficient handling of sensitive process fluids. Engineered in accordance with the most stringent hygienic design standards, the pump features fully validated and effective Cleaning-in-Place (CIP) capability. The SRU pump range is suitable for applications across the dairy, food, beverage, brewing, chemical, pharmaceutical, and home and personal care industries. Its smooth, low-shear pumping principle allows for the handling of products with a wide range of viscosities—from low to very high—including creams, gels, emulsions, aerated mixtures, and media containing delicate cells or organic solids in suspension. Products containing fragile solids, such as curd, can be transferred without damage due to the specially designed tri-lobe stainless steel rotors. The pump has a nominal displaceme ...

Automatic foil wrapping machine designed for packing butter and similar products in aluminium foil. The machine was previously used in a butter production facility and operates with the SIG folding principle, featuring a side folding flap to minimise foil consumption., The machine is equipped with a rotating forming drum with 4 rectangular moulding chambers, designed for a 250 gram butter format with dimensions of approximately 106 × 65 × ± 38 mm. The butter is fed into the machine via an aluminium trough fitted with augers, ensuring a continuous product supply to the wrapping section. A photocell is installed at the foil infeed to detect the exact position of the printed packaging material, ensuring accurate alignment of the print on each wrapped product., The machine speed is adjustable by means of a frequency converter, allowing the operating speed to be adapted to the product char ...

Egli butter reworking line designed for processing and reworking frozen or chilled butter blocks with a core temperature above ± 0 °C. The installation is suitable for industrial butter processing applications where solid butter blocks need to be broken down and prepared for further processing. The line consists of a butter bulk conveyor, Egli, EBSCM 7, V-6000-2, block shredder with a motor of 7,5 kW and Egli, EBW34 reworking silo of 5.000 liter, equipped with 2x augers with a motor of 9 kW and a reduced speed of 6,8 - 27 rpm. The bulk conveyor feeds the butter blocks into the shredder, where the butter is reduced into smaller pieces. The shredded butter is subsequently transferred into the reworking silo, where the twin augers ensure controlled product movement and facilitate further processing. The installation is designed for hygienic food processing and is CIP-cleanable (Cleaning-i ...

Tetra Pak Tetra Alex 2 (TA2/200BAR) high-pressure homogeniser, designed for the homogenisation of milk, dairy products and other liquid food products., The machine is equipped with a 3-cylinder homogenising block and a single-stage homogenisation system with mushroom-type valves. The maximum design capacity is up to 6,500 litres per hour at a maximum pressure of 160 bar. With the currently installed 30 kW motor, the machine is configured for a capacity of approximately 4.000 litres per hour at an operating pressure of up to 200 bar with a piston diameter of 40 mm. The homogeniser is equipped with hydraulically operated pressure-setting valves, mounted on the side panel, allowing adjustment of the homogenisation pressure. A pressure gauge is installed to monitor operating pressure and pulsation dampers are ensure smooth product flow. The machine also features an integrated oil pumping sys ...

Universal processing machine manufactured by Marcos Inox, suitable for the preparation and processing of a wide range of products, including processed cheese, convenience foods, vegan spreads and confectionery. The machine is equipped with an electrically driven agitator for efficient product mixing, featuring a 3.3 kW motor operating at 380–420 V and 7.8 A. The lid incorporates injection ports for the direct injection of culinary steam into the product, as well as an integrated temperature sensor for monitoring the product temperature during processing. The double-jacketed processing bowl is designed for temperature-controlled processing. The bowl can be hydraulically tilted to facilitate product discharge. The lid is hydraulically operated and can be raised to a vertical position, providing convenient access to the bowl for loading, inspection and cleaning. The machine is fitted with ...

APV Direct Steam Injection (DSI) Uperizer UHT processing Plant with Aseptic Homogeniser, previously used for the sterilisation of milk and dairy products. The installation has a processing capacity of 7.600 litres per hour and is designed for high-temperature sterilisation at temperatures of up to 150°C., The system utilises direct steam injection for rapid product heating, followed by flash cooling under vacuum to achieve the desired processing temperature. The line is equipped with an APV Gaulin MC 45-5TPSX aseptic homogeniser, ensuring efficient homogenisation under high pressure for consistent product quality., In the Uperizer head, pure, culinary-grade steam is injected directly into the product flow under high pressure. This causes the temperature to rise almost instantaneously—within fractions of a second—to between 140 °C and 150 °C. The milk is then held at this temperatu ...

Serviced Continuous Butter Making Machine (CBM) equipped with a new Rittal control panel with simple and user-friendly controls. Stainless Steel frame execution. The machine is designed for the continuous production of sweet butter from cultured and / or sweet cream and is suitable for hygienic dairy processing applications. The CBM has a butter production capacity of approximately 1.500 kg per hour and is designed for an input of approximately 3.000 litres of cultered or / and sweet cream per hour (38/42% fat, pH of 4,5/4,8 and infeed temperature ± 10 - 13 °C). Completely electrically driven; Churning cylinder / Beater I: 22 kW, Churning cylinder II: 2,2 kW and Squeezer / Working section: 5,5 kW., The machine is equipped with a new Rittal electrical control panel, incorporating simple and clearly arranged controls for the main machine functions. The control panel includes:, - 3 x Danf ...

Used Alfa Laval MRPX 218 TGV-74C self-cleaning cream separator (skimmer), designed for the separation of warm milk into cream and skim milk. The separator is equipped with a self-cleaning / automatic solids discharge bowl, allowing accumulated solids to be discharged during operation. The original Alfa Laval design is suitable for continuous automatic operation and CIP cleaning., The separator has a nominal capacity of approximately 22.500 litres per hour for skimming warm milk and up to 30.000 litres per hour for milk clarification and standardisation., The machine is offered with the separator bowl, 30 kW electric motor and motor cover, together with inlet / outlet pipework with pump, pressure gauge and operating water valve., Please note that the horizontal main drive shaft is missing. The machine is therefore offered in its present condition and will require completion before it can  ...

Used APV Gaulin KF6-3PS homogeniser, designed for a capacity of approximately 2.500 litres per hour and a maximum operating pressure of 200 bar (3.000 PSI)., The homogeniser is a 3-cylinder high-pressure machine and is equipped with a 2-stage homogenising valve assembly. Both homogenising stages are manually adjustable, allowing the operating pressure of each stage to be set according to the product and process requirements., The machine is fitted with pressure gauges for monitoring the operating pressure. The product-contact pump section and associated product pipework are manufactured in stainless steel., The homogeniser is driven by an 18 kW (25 HP) electric motor, suitable for 380/660 V, 50 Hz, with a motor speed of 1.450 rpm., Suitable for homogenisation applications within the dairy, food and beverage processing industries, depending on the product and required process conditions., ...

Stainless Steel Buffer Tank with Scraper Agitator and Pump Set. The stainless steel buffer tank with a capacity of approximately 80 litres, is equipped with an electrically driven scraper agitator (0,37 kW) to ensure continuous product movement and prevent product build-up on the tank walls. The tank diameter is 860 mm., The tank is supplied complete with two opening lids, one Omac BB115-3250-U positive displacement product pump (serial number L028494, year 2014, motor 1,1 kW) and one APV Puma + 20 155 centrifugal pump (serial number 30000136, year 2010, motor 3 kW)., A compact stainless steel buffer tank installation, suitable for intermediate product storage and transfer in food and dairy processing applications., Type of Machine: Buffer tank, Total volume: ± 80 liter, Inside Diameter: 860 mm, Agitator type: Scraping agitator that goes along the wall, Motor of agitator: 0,37 kW, Total ...

Vertical flow-wrapping machine with film unwinding, forming shoulder and feeding technology for packaging bulk materials. Manufacturer: WOLF Verpackungsmaschinen GmbH Type: VPP-350 Year of Make: 2001 Machine number: 0550 Serial number: 2.01.027 Packaging Method: Vertical Flow Wrapping Film feeder: Film roll with film guide Film forming: forming shoulder and forming tube Material finish: Stainless steel cladding Feeding technology: Ascending conveyor belt with carriers and stainless steel feed hopper Operation: Digital control and display panel Compressed air treatment: ALLEN CODING SYSTEMS Compressed air inlet pressure: 4–10 bar (indicated on the compressed air regulator) Compressed air outlet pressure: 3–4.5 bar (indicated on the compressed air regulator)

Automated handling system for picking, positioning and transferring baked goods or biscuits within a production line. Manufacturer: Schubert Machine type: Pick-and-place system / handling and transfer system Year of Make: 2005 Application: Bakery and biscuit production Control: Touchscreen control panel Operating modes: automatic, manual and service functions Product transport: Multi-lane conveyor belt systems Handling system: Automated gripping and repositioning units Equipment: Maintenance platform with railing, extraction and ventilation system, emergency stop switch Fan manufacturer: Rosenberg Fan type: RS 200 L (U05-07) Fan power: 0.160/0.21 kW Fan speed: 2540/2690 rpm Fan voltage: 230 V

Checkweigher with pneumatic reject cilinder., Transport direction: left to right, e=d= 1 / 2 g, Minimal weight: 225 g, Belt speed: max 85 m/min, Capacity: Max 180 pc/min, Weighing scale: max 1200 / 3600g, Weighing plateau: 425 mm, Belt width: 300 mm, Compressed air: 4 - 10 Bar, Power: 230VAC, 50Hz, 1Ph, 4.3A, Dimensions: 1400 x 900 x 1200 mm

Description Item # 9367 - COFFEE ROASTING AND PACKING LINE Including : TOPER (Turkey) Coffee Roaster, Model TKMSX15, Year 2010, 15Kgs batch capacity TOP Y MACHINERY Bucket Elevator Feeders, Model TOPY-BE, Year 2025, TOP Y MACHINERY 2-Head linear Weigher IBL INTERNATIONAL Grinder, Model Km145, MDP Mini Doypack Packaging Machine The pre-made pouches Doypack packing machine will do 12 x 1kg packs a minute could pack 1 - 5kg bags It was doing a pouch size 220mm High x 140mm Wide, that is a 200g pouch of coffee, Vacuum Unit/Dust Extractor WORTHINGTON Rollair 550T Compressor SNEED Date Coding Unit, mounted on conveyor