other food machines used for sale (961)

Manufacturer: Becomix Type MV 250 Year of manufacture 2015 never in production Usable volume capacity 250 l Vacuum and flameproof -1/+2 bar Operating temperature 20-134 °C Boiler room Pressure-resistant 0-4 bar Operating temperature 20-152 °C The container is double-walled and insulated. Turbo dissolver vibrator with integrated CIP pump, speed-adjustable with frequency converter Cip ball, mobile. Soaking liquid, soaking powder powder Mirror-polished version, mobile Pharmaceutical version. Qualification documentation is available.

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (powder jet), water-cooled motor. Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Offered for sale is a Kern Kraft chamber filter press. Max. filtration capacity: 2000l/24h, number of filter plates: 10 standard, expandable to 20, filter area range: 3.9m²-8m², chamber volume: approx. 40l. Equipped with plates and cloths, pressure switch, stainless steel filter cake tray and stainless steel piping, expansion tank, check valve and automatic shutdown, pump and candle filter housing with filter cartridge and control cabinet. Dimensions X/Y/Z: 2500mm/1000mm/1800mm, weight: approx. 630kg. An on-site inspection is possible.

Wangen Twin NG70 Screw Pump 2022, Stainless, designed to reliably pump low to high viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The hygienic pump for food and beverages, chemicals and cosmetics. With touch screen HMI screen controls, all on mobile stainless skid, 3Ph

Qty. 1 Second-hand Tomato Paste Line Mfc.: ELPO SpA Built: 2004 – Never in operation Nominal capacity: 500 T of tomatos/day Paste: 30 T/day of concentrated tomato paste Scope of supply: Tower Assembly, Flat Beam Structure, and Electrical Control Panels Tomato Processing Line (Hot Break Process) Filling Machine (Dispenser) Electrical Control Panel Water Filtration System CIP (Clean-in-Place) System Evaporator and Boiler

Technical specifications: Type 6500/075 as a processing plant with an indirect heating system. Serial number of the plant: 95711701. Year of manufacture: 1996/2003. Capacity: 7,500 l/h - Product inlet temperature approx. 6 °C - Sterilization temperature 139 °C - Product outlet temperature approx. 25 °C Products: Long-life milk, milk-based mixed drinks, coffee cream, cream, various liquid products. Including: - Homogeniser NIRO-SOAVI, Type 3075/55, Operating pressure 220bar, 2.stage 45bar. - GEA-CIP-Unit, FINAMAT Complete with valves and pumps, - Aseptic-tank, GEA-FINNAH, Make: RITTER GMBH, Serial No. 95710 903 Operating pressure: -1/+3.5 bar pü at 150°C Operating volume 10.000 ltr. - Several Electrical and pneumatic Controll cabinets. All equipment is still complete installed.

Make : Inoxpa, Usage : Powder Blending - Homogeniser, Capacity : 5000 L/h, Y.o.m 2016, Powder Inlet Funnel, Product Inlet Pump, Product Outlet pump for circulation, Sample Valve, Stainless steel skid mounted, Condition : Excellent

These Scrape Surface Heat Exchangers can be used on various products for heating process such as Tomato pastes, custards, margarines, oils, mayonnaise, etc. We have fully refurbished these units by changing internal gaskets, rings, sand blasting , paint job, new stainless steel frame , new controls and motor test and service ., Technical Details of VOTATOR, - Make: A. Johnson & Co London, - Year of Refurbishment: 2025, - Quantity: 5 units, - Diameter: 6 inches, - Metals: Grade 316 Stainless Steel, - Usage: Horizontal Votators, Specifications:, - Chamber Dimensions:6 Diameter Stainless Steel Chamber, - Length: 6, - 1 1/2 between end plates, - Rotating Centre:4 3/4 Diameter Stainless Steel, - Equipped with two PTFE scraper blades, - Drive:11 kW Motor Drives, - Speed: 1470 rpm (through a V-belt reduction), - Reducer:Giving a shaft speed of approximately 367 RPM., Availability:, - Location:  ...

Standard features New pump Specifications, Capacity: 63 m3/h

Maurer cooking chamber. Twin trolley., 6 trolleys available

Sealpac 350 Traysealer, -

Multi-person workstation, see photos for more details.

Hitec, Z-Elevating conveyor belt., Dimensions in the photo album., More information on request.

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Additional features:, Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed ...

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), desludge cyclone, base plate, feet, CPM-valve for the pressure regulation, control panel (original Alfa Laval) and waterbox (original Alfa Laval)., Additional features: Excluding:, - Service tools for maintenance., Capacity 10.000 - 15.000 liter per hour., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 5.069 rpm, Motor: 22 kW

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (11 kW), base plate, feet, control panel, water valves, inlet and outlet pipes and service tools for maintenance., Additional features:, Excluding:, - Motor cover., Type of Machine: Cream Separator / Skimmer, Capacity: 5.000 - 7.000 liter per hour, Bowl speed: 6.520 rpm, Motor: 11 kW - 380 V - 50 Hz - 1460 rpm, Weight: ± 1.300 kg

A 14-head Ishida scale with a display replaced a few years ago is available. Throughput: approx. 80weighings/min, portion range: 10g-500g, deviation: +/-1g, machine dimensions X/Y/Z: approx. 1600mm/1500mm/1900mm, weight: approx. 700kg. An on-site inspection is possible.

An Ishida 14-head multihead weigher is available. Hopper volume: 3l, weighing range: 25g-1000g, max. volume for weighing: 4.5l/single dump, resolution: 0.2g, max. throughput: 90weighments/min, machine diameter: approx. 1360mm, height: approx. 1850mm, weight: approx. 500kg. An on-site inspection is possible.

OASE Restbrotzerkleinerer RZ – Stale bread shredder Professional bread shredder for sale by OASE (DIOSNA). The machine is designed for the production of breadcrumbs by shredding stale bread, rolls and other dry bakery products. The solid stainless steel construction guarantees many years of trouble-free operation. Specifications: 400 V power supply power approx. 3 kW Capacity up to 600 kg/h stainless steel tilting hopper replaceable screens (one) Mobile design on wheels The machine is in good technical condition, ideal for bakeries, confectioneries and breadcrumbs production plants.

Unused Vibration Transducer for a Alfa Laval / Tetra Pak Separator. Article number Alfa Laval: 55215801. Article number Tetra Pak: 6 - 55215801. Original manufacturer for Alfa Laval / Tetra Pak: Brüel & Kjaer Vibro, type VS-068., Type of Machine: Vibration Transduce, Article number Alfa Laval: 55215801, Article number Tetra Pak: 6 - 55215801

A dynamic Novoflow crossflow filtration system with integrated CIP system from the food industry is available. Filter area: 2m², Filter discs: 16, Filter disc material: ceramic, Filter disc diameter: 312mm, Pore size: 0.2µm, Max. operating pressure: 4bar, Max. operating temperature: 60°C, Speed: 450rpm, Process volume: approx. 60l. Machine dimensions X/Y/Z: approx. 1500mm/600mm/1500mm, Weight: approx. 250kg. Documentation available. An on-site inspection is possible.

Calibre: 13 - 38 mm, Pipe set: Calibre 38 & 25, Steam: 140 - 260 kg/h, @2 Bar, Compressed air: 5 - 7 Bar, Power: 3 x 380V, 50Hz, 3.7kW, Dimensions: 1900 x 700 x 1500 mm, Weight: 550 kg

Horizontal cooking installation for pressure cooking with vacuum and CIP system, Capacity: 200 litre, Mixing speed: max 25 RPM, Pressure: -1 - max 4 Bar, Vacuum pump: SIHI LEMB91 AZ, Temperature: max 150°C, Heating: steam, double jacket and heating spiral, Compressed air: 6 - 10 Bar, Power: 3 x 400V, 50Hz, 4kW, Dimensions: 2900 x 1300 x 2300 mm, Weight: 1200 kg