other food machines used for sale (961)

Sell an electric drum roaster made of stainless steel with a capacity of approx. 10 kg. Versatile for roasting nuts, almonds, peanuts, coffee, cocoa beans. Ideal for manufactory, farm shop, confectionery, café or small production. The rotating stainless steel drum ensures even roasting, and the temperature is adjustable via the temperature controller. Easy to operate via on/off switch and temperature control. The device is mobile (on castors) and can therefore be used flexibly. Important: The device requires a high-voltage connection (400 V / three-phase current). Please check before purchasing whether an appropriate connection is available at the installation site. Equipment / Data: Electric drum roaster Connection: High voltage (400 V / three-phase current, CEE plug) Capacity: approx. 10 kg Rotating Stainless Steel Drum Adjustable temperature controller Filling/ ...

Stephan UMC 12 Cutter – Complete set with temperature control unit, vacuum pump & water separator, ready for immediate use Key data: Manufacturer: Stephan (A. Stephan u. Söhne GmbH, Hameln) Type: UMC 12 Masch.-Nr.: 719.908.01 Year of Make: 1993 Bowl capacity: 12 litres Motor: 1.5 / 1.9 kW, two speeds 1,400 / 2,800 rpm Connection: 380 V, 50 Hz, IP 54 Made in Germany Description: A fully functional Stephan UMC 12 is offered as a temperature-controlled complete vacuum system for mixing, crushing, emulsifying and thermizing under vacuum. Working under vacuum ensures bubble-free, homogeneous emulsions and creams without air entrapment and protects oxidation-sensitive products – ideal for laboratories, pilot plants, food development as well as cosmetic and pharmaceutical applications. The machine is currently fully operational and can be demonstrated on site. Bowl, lid an ...

QTY. 1 SECOND-HAND PASTA / NOODLE PRODUCTION LINE – FOR SHORT AND LONG PASTA Mfct.: Macri (Italy), Braibanti (Italy); Capacity: approx. 260 kg/h; Built: 1990 & 2000, Status: still on foundation, stopped in 2022 General description: The pasta factory currently works with 2 x 160 Kg/h presses, one for long pasta and one for short pasta. The drying capacity of each dryer is +/- 500 kg. To fill them all it takes +/- 15/16 hours, i.e. two work shifts. Required area: 805 sqm., approximately L x W x H = 35 m x 23 m x 7 m

Specifications: Double wall drum with extended drum capacity Adjustable airflow and drum speed on control panel Adjustable flame modulation of gas burner controlled automatically with our roasting profile BESCA software or manual control via touch panel Cast Iron Front Lid Long-lasting, worldwide known and durable components Digital drum speed and exhaust fan speed control 2 thermocouples for bean and exhaust temperature Gas flow control on panel Separate cyclone for effective chaff removal Premix high performance burners Gas safety device and automatic ignition 4 direct drive motors Fast cooling with strong suction fans PC connection Max.Batch Capacity: 5 kg Hourly Output (kg/hour) 20 kg Roasting Time 10-14 min Cooling Time 3-4 min Burner Capacity 28 kW Required Gas Pressure (mbar) 30-50 mbar Power Requirment 1,66 kW Supply Voltage 110/220/380 Fuel Type Propane/L ...

Cooling/Freezing chamber Viessmann -External dimensions: 3600 x 2400 x 2150 mm -Internal dimensions: 3400 x 2200 x 1950 mm -Plate thickness: 100 mm -Door clearance: 800 x 1800 mm -Stainless steel floor -Cooling/Freezing unit in set -Stock status: 1 -The chamber is easy to assemble

JWE-Baumann Dehairer -Type: CSDM BM20S -Capacity: 15 pigs/h -Max. weight: up to 250 kg -With separator -With heaters in oil -Year of manufacture: 2021 -Dimensions: 2750 x 1050 x 1780 mm -Working length: 1970 mm -Separator dimensions: 950 x 670 x 1100 mm -Made of stainless steel -Condition: Used in very good condition, ready to work

The plant include Major 3 decanter P1500/2000 Seperator All equipments include

Equipment: Vacuum,Manufacturer: VAKUMIX,Condition: used,Volume: 1,980,Vacuum: 1,0,Max. permissible Operating temperature : 99,Lower shelf: conical bottom,Top bottom: Top shelf removable / foldable,Design: upright,Stand shape: Frame,Diameter inside: 1.300,Cylindrical height: 1.095,Total height: 2.760,Wall thickness underbody: 8,Wall thickness cylinder: 8,Wall thickness upper floor: 20,Year of construction: 2009,Technical documentation: Drawing,Type plate: Yes,Outlet: Flange,Outlet : 280,Note: slight adhesions,Remarks: Height-adjustable frame made of V2A various connections in the top floor Topsoil leaves

Condition: used,Other: The M-Pulse metal detector is a highly sensitive device for the reliable detection of metallic foreign bodies. An inductive measuring method with a balanced coil system is used. The metal detector is exclusively intended to detect metallic foreign bodies in pasty or liquid media. A more detailed description of the machine can be found in the existing owner's manual.

Equipment: Agitator,Condition: Factory new,Other: High-speed mixer with massive, non-removable stirring shaft, balanced for concentricity in the speed range For liquid media up to 600 mPas and a density of up to 1.2 kg/l in a 1000L IBC container 3-blade mixing propeller 138mm screwed in at the end of the stirrer shaft Mixing propeller from a single cast, highly polished Power: 0.75 KW Speed: 1410 rpm Voltage: 3PH 400V 50Hz IE3 with 3 PTC conductors Material in contact with the product: 1.4404 (V4A) Agitator weight approx.: 16 kg Stainless steel crossbar 1.4301 (V2A), with 2 tension hooks and 4 side carrying handles

Equipment: Agitator,Condition: used,Manufacturer agitator: PRG Präzisions-Rührer GmbH,Agitator: Propeller,Speed: 965,Bottom bearing: No,Voltage volt: 400,Power: 8,Current interferer: No,Material in contact with the product: V4A 1.4571 (AISI316),Type plate: Yes,Agitator equipment: 1 small bump in the fan cover,Wavelength: 500,Shaft diameter: 125,Blade diameter: 320

Equipment: Agitator,Condition: Factory new,Technical documents: Drawing,Agitator: Propeller,Agitator arrangement: eccentric in the topsoil,Speed: 1,430,Bottom bearing: No,Voltage Volt: 400,Power: 2,2,Current interferer: No,Material in contact with the product: V4A 1.4571 (AISI316),Type plate: Yes,Shaft length: 1460,Shaft diameter: 42,Blade diameter: 200

Equipment: Agitator,Condition: used,Manufacturer agitator: TMR,Agitator: Propeller,Speed: 1.430,Bottom bearing: No,Voltage Volt: 400/690,Power: 4,Current interferer: No,Material in contact with the product: V4A 1.4571 (AISI316),Type plate: Yes,Agitator Equipment: Principle drawing available (slight dimensional deviations present) Agitators were only used for a short time according to the previous operator 1 agitator with a small dent in the fan cover of the motor (see photos), Shaft Length: 740,Shaft Diameter: 50,Wing Diameter: 220

Equipment: Agitator,Condition: used,Other: Agitator incomplete Rotor (propeller) missing diameter stator top approx. 350 mm Diameter stator bottom approx. 300 mm,Manufacturer agitator: Ystral,Agitator: Jet mixer,Speed: 730 / 1475,Bottom bearing: No,Voltage Volt: 380,Power: 3.5 / 13,Current interferer: No,Material in contact with the product: V2A 1.4301 (AISI304),Nameplate: Yes,Wavelength: 600,Shaft diameter: 75

Equipment: Agitator,Condition: factory new,Agitator: Beam stirrer,Speed: 17,Bottom bearing: No,Voltage volt: 230/400,Power: 3,Current interferer: No,Material in contact with the product: V4A 1.4401/04 (AISI316),Type plate: Yes,Agitator Equipment: Wavelength measured from the underside of the lantern Diameter of stirring blades: approx. 1 x 1,130 mm, 1 x 1,530 mm, 1 x 1,930 mm Stirrer blades must be welded to the agitator shaft on site before using the agitator, one agitator is missing the lantern, Wavelength: 2620,Shaft Diameter: 60

Equipment: Agitator,Condition: used,Other: Also sold with matching mixing tank, see #8336.,Manufacturer agitator: Ystral,Agitator: Jet mixer,Speed: 730 / 1455,Bottom bearing: No,Voltage Volt: 400,Power: 13 / 19,Current interferer: No,Material in contact with the product: V2A 1.4301 (AISI304),Type plate: Yes

Condition: used,Other: Drive power: 11 kW Areas of application: Mixing / homogenizing and pumping over emulsions and pastes,Total height: 650,Total length: 1,200,Total width: 460

Condition: used,Other: Overall width: 1,950 mmTotal depth: 1050 mmTotal height: 1,400 mmHot mixer: approx. 10 litres - 5.5 kWCalter mixer: approx. 25 litres - 2.2 kWFflange closure of the hot mixer may be missing and would have to be replaced on site,Manufacturer: DIOSNA Dierks & Söhne

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Incomplete Cream separator (Skimmer). Self cleaning. Machine comes with the frame, bowl, hood, horizontal and vertical axle., Additional features:, � ��Excludin g:, - Motor., - Motorcover., - Baseplate and feet, - Waterbox with water valves., - Inlet / outlet pipes., - Control panel., - Service tools for maintenance., Additional with this stocknumber several unused and used spare parts., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.450 rpm, Weight: 1.420 kg, Dimensions: 145 x 110 x 175 cm

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

Used HEUFT empty bottle inspector 72000 BPHTechnical Specifications & Performance DataThis Empty Bottle Inspector (EBI) is engineered for high-speed beverage production and industrial packaging environments. Manufactured by HEUFT, the system combines a HEUFT InLine reflexx Release 9 inspector with a HEUFT Spectrum SX TB 72 pre-selection unit, networked for complete bottle flow control. Designed for integration in a used bottling line, it offers robust inspection performance for returnable glass bottles at line speeds up to 72,000 bottles per hour.Manufacturer: HEUFTPrimary model: InLine reflexx Release 9Pre-selection unit: Spectrum SX TB 72 (with Gateway II network interface)Additional platform reference: Spectrum TXYear of manufacture: 2009Maximum capacity: 72,000 bottles/hourBottle formats: Compatible with 0.33L and 0.5L bottle formatsContainers: Designed for Glass bottle handling (gre ...

Used Inspector KRONES Linatronic K735 year 2011 The Used Inspector KRONES Linatronic K735 year 2011 offers a proven and efficient solution for quality control in high-performance bottling lines. The German manufacturer KRONES, a global leader in beverage industry automation, built this model with reliability, precision, and modular construction in mind. As a result, this inspector fits seamlessly into industrial environments that demand high accuracy and operational consistency. Electrical characteristics and technical configuration of the Used Inspector KRONES The Used Inspector KRONES Linatronic K735 year 2011 runs on a three-phase power supply at 400/230 volts, with a 50 Hz frequency and a 13-ampere current draw. Consequently, it aligns with European industrial standards and supports stable operation under demanding conditions. Furthermore, the electrical system includes integrated sa ...

Technical Specifications & Performance Data The New Bottle Inspector Weight Checking Inspections Unit with Rejection Piston is an inline, high-throughput solution engineered for precise mass verification of individual packages without stopping product flow. Purpose-built for beverage production and industrial packaging environments, it delivers reliable, non-contact rejection for out-of-tolerance items, ensuring consistent quality and regulatory compliance. Application: Inline dynamic weight control with automatic reject piston Maximum speed: up to 11,000 bph (bottles/packs per hour) Inspection type: 2 (dual-threshold underweight/overweight logic) Containers: Brik cartons and cans (aluminum tins/cans) Conveying architecture: multi-conveyor configuration (4 conveyors) for stable weighing and controlled reject Operation: Simultaneous weighing without line stoppage; positive push-off reject ...

Used Bottle Inspector GF HAWK 24 000 BPH Characteristics of the machine and of the products handled It is made through: – traditional commands (push button panel) – PC hardware (video, keyboard and mouse) Traditional commands In order to allow quick and safe intervention by the operator, the controls have been provided of a traditional type; for example: – machine stop – machine running – etc. PC hardware The machine is equipped with the main hardware elements of the PC, such as: – video – keyboard – mouse Ambient temperature In order not to jeopardize the safety and optimal operation of the machine, follow the values ​​indicated: – storage temperature: from -10 to 60 ° C – ambient operating temperature from 10 to 45 ° C – temperature inside panels: Power electrical cabinet: – electrical power cabinet temperature: t.MAX.

Technical Specifications & Performance Data The Used Bertolaso Inspector 2002 Push 210 is a compact, reliable inspection station engineered for quality assurance on a used bottling line handling still wine in glass bottles. Designed to monitor fill-level accuracy and closure presence, it helps producers maintain consistent packaging quality and reduce downstream rejects in beverage production environments. Manufacturer / Model: Bertolaso Push 210 Year: 2002 Category: Inspector (Inspection type: 2 – fill level and closure presence) Condition: READY FOR OPERATION Container types: Glass (inspection station primarily configured for glass bottles) Bottle formats: 0.06 L, 0.375 L, 0.75 L Product types: Wine (still) Core functions: Automatic minimum/maximum fill-level control; cap/cork presence check; automatic reject to external area Auto-calibration: Continuous self-calibration using the pr ...

Used Inspector Filtec 2007 This is a used inspector manufactured by Filmtec in 2007 of the modell Omnivision 1. It is able to inspect up to 45,000 bottles an hour. The bottle formats that it is capable of inspecting are: – 0.33L and 0.5 L Bottles upside down – 0.33 L Steinie – 0.5 L NRW All the safeguards and manuals of this used inspector are available. The maintenance documentation is available as well. The machine is currently ready for operation. It processes beer in glass bottles. Type of inspection performed: CCD – Camera PLC type: DSP (Digital Signal Processing) Some spare parts are also available.