other machines and plants used for sale (16,840)

It is a complete system for dyeing and polishing the side edges of the belt, with 3 heating ovens, extraction system and automatic ejection at the end.

Holmes HR32 Blower Positive displacement air blower, HR32, with Brook Crompton 45Kw motor, RPM 1470, all mounted on frame, 3Ph

SW BA one6Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpmMovement X/Y/Z : 600/650/500 mmTool holder : HSK 63 ____________Description:In General:Year of manufacture:2020Control system:Siemens 840 DslTravel range X/Y/Z:600/630/500Rapid traverse X/Y/Z:120 m/minSpindle:Technologie:MotorspindelnDrehzahl:17.500 U/minLeistung:35 NmDrehmoment:80 NmWerkzeugaufnahme:HSK-63Swivel mount:Technology:A-axis or U-axis with counter bearingDrive:Direct drive (torque motors)Clamping bridge:Technology:Clamping bridge with 1x NC rotary table eachDrive:Direct drive (torque motors)Table diameter:Ø 340 mmMax. table load:150 kgMax. fixture dimensions:Ø 675 x 450 mmTool magazin:Technology:Chain magazineTool changer:Pick-upNumber of stations:105Max. tool diameter:80 (160) mmMax. tool length:450 mmEquipment:Position measurement systems:Direct on all axes (glass scales)Drive systems:Direct  ...

Class/vehicle type: semi-trailer tractor and tractor unit, body type: closed, color: green, curb weight: 6.084t, gross vehicle weight: 10.6t, max. permissible axle load axle 1: 6.2t, max. permissible axle load axle 2: 6.2t, drive type: diesel, max. speed: 95km/h, power: 110kW, displacement (P1): 7675cm³, rated speed: 2600rpm, stationary noise level: 90dBA, engine speed for stationary noise measurement: 1950rpm, mileage: 235,340km, with documentation. An on-site inspection is possible.

A Eurofold T 435 folding machine in need of repair with a second unit for cross folding is offered. Main machine: A3 folding machine with 4 folding plates, second folding machine: A3 with 2 folding plates. Equipment: electric A3 folding plate set, counting and spacing unit, A2/A3 pile feeder, A3 angled conveyor, standard machine table, electric stream delivery, Becker compressor 25ccm, electric cross-fold folding plate set, L roller conveyor and cross-fold machine table. Motor, pumps, blower and electronics are technically in working order. The polyurethane on the rollers has leaked out, so the rollers must be replaced. Documentation available. Inspection by appointment possible.

mobile finest oil filtering technology, newTechnical oils serve just one purpose: It should run smoothly.After all, a machine downtime costs you time and money.Our filter technology was developed in order to optimizemachine running times.Ultra-fine filter technology ? for the sake of your machinesIn order to achieve a high level of purity we offer theappropriate technology for the different oils and applicationareas:- in order to achieve the best purity class- under the aspect of economyFinest filter technologyOur systems maintain the oil of your machines so that thenecessary oil purity is secured:- Ultra fine filtration of technical oils up to 1µm- Extremely long service life of the filters with up to 2.000 hours- High capacity to absorb water with up to 5 liters- Before starting up- Mobile for maintenance intervals on several machines- In the oil circuit during runtime operationtechni ...

mobile finest oil filtering technology, newThe mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities.The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and bettertechnical data M 130flow oil: bis 1.050, 1.500, o. 2.100 liter/hourdimensions: height: ca. 1.175 mm, width: 585 mm, depth: 811 mmweight: ca. 93 kgPlease, contact  ...

table-size:900 x 600 mmthree-axis-real value indicator: EDM Walter axis stroke (X,Y,Z):400 x 600 x 180 mmworkpiece weight:max. 650 kg

power capacity:2x 5,5 kWfeed pressure:16 barliter capacity:2 x 585 l /minReceiver capacity:750 ltotal power requirement:380 V,50 Hz,11,2A, 2x5,5 kWweight of the machine ca.:940 kgdimensions of the machine ca.:3000 x 900 x 1650 mm

feed pressure:8 bar:Verd. 5050 min /1voltage:400 Vrated current:90 Atotal power requirement:46,5 kWweight of the machine ca.:1320 tdimensions of the machine ca.:1800 x 1600 x 2300 mmfrequency:50 HzEffizienz::7,4 m3/minIP::54 / 20

power capacity:110 kWfeed pressure:10 barNumber of working hours:11 372 / Lastst. 7436 hvolume capacity:16,75 m³/mintotal power requirement:110 kWweight of the machine ca.:2,3 tdimensions of the machine ca.:2400 x 1630 x1820 mm

degree:900 working heigth:100 mmwidth:4 x 330 mmdimensions of the machine ca.:20,4 x 3,5 x 2,5 mGENERAL INFORMATION?Electrically heated roller kiln Mod. TR 18/4x33/10-E 90?Condition: as new. Price as new 1,2 Mio. ?.?Offer for immediate saleThere are many different areas of application (e.g. burning in metal, roof tiles, etc.). SPECIFICATIONSThe kiln is an electrically heated roller kiln. The product is mechanically transported through the kiln on a roller conveyor.The kiln is designed in such a way that no special foundation is required. The usual concreted, screededflat hall floor is sufficient.The dimensions of the sections of the plant, which consists of heating, sintering and cooling zones, are adapted to the requirements of the temperature curve.Temperatures and pressures in the kiln are controlled automatically.The kiln casings are modular. Each housing is lined with different bric ...

Basket size LxWxH:550 x 300 x 350 mmNo. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °CUltrasonic cleaning unit with high alloybasket- Ultrasonic frequency 28 kHz- automatic breakdown for heating and ultrasonic for low level water

Basket size LxWxH:800 x 500 x 400 mmMax. basket weight:250 kgNo. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kWRated power supply:8 kVAMachine size LxWxH:1,5 x 1,15 x 0,9 mUltrasonic cleaning machine with 28 or 40 khz generator

feed pressure:10 barairflow volume:1,06 m³/minMotor RPM:3920 1/mintotal power requirement:7,5 kWelectrics - voltage/frequency:400/50 V/Hzmachine weight approx.:250 kgdimensions L x W x H:1,5 x 2 x 2 mProfessional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments.The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability.It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling.The control panel with star-delta start control is positioned for easy reading and operation.The opening front door allows for easy maintenance.

Basket size LxWxH:530 x 320 x 200 mmMax. basket weight:50 kgcapacity:4 Körbe/h; baskets/hNo. of washing chambers:1 No. Of tanks for washing:1 No. Of tnks for conserving:1 Cleaning medium:Tetrachlorethen Electrical heating power:42 kWMachine size LxWxH:4 x 3 x 2 m

Basket size LxWxH: 900 x 500 x 450 mmMax. basket weight:300 kgNo. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kWRated power supply:30 KWtank capacity:250 / 180 lCapacity:140/120 LMachine size LxWxH:1,9 x 1,5 x 2,7 mCleaning device with 3 steps and basket dia. of 900 mmPLC control, tank exhauster pump

DIMENSIONS / WEIGHTS:. - total weight approx.:150 kg

Highly automated CNC tube bending cell Rosenberger RB20 Typical application The RB20 series is designed for cold bending of one or more bends on pipes It is used in industries such as the automotive industry, furniture manufacturing or plant engineering, where precise series bending is required. Technical features and function Type: ROSENBERGER RB20 (built in 2003) Performance & geometry: Servo-electric precision drive with a cold bending capacity of max. Ø 20 x 1.5 mm in steel. High flexibility due to freely selectable bending planes within the 78 mm tool height as well as generous 3-axis travel paths (X/Y/Z: 260 × 146 × 1,170 mm) Control technology: The logical processing is carried out via a robust Siemens Simatic S7-300 PLC, paired with an industrial control panel from B&R Robot automation: Fully automatic handling (loading/unloading) by means of an integrate ...

1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equ ...

Class IIA medical device. The unit switches on as expected. All three vacuum pumps are fully functional and can be controlled via the control panel. See images for technical specifications. It shows some signs of wear but is in excellent condition. There is an additional display, the functionality of which is unknown. The door lock has been removed.

2016~3,360 hours (seller estimate: 20 cycles of 7 days each)All cables and connectors

X-axis: 800mm, Y-axis: 400mm, Z-axis: 400mm, max. workpiece weight: 150kg, software: Windows 7, with documentation. An on-site inspection is possible.

Two Emma flying probe PCB testers are available. 1) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2004. 2) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2002. An on-site inspection is possible.

Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible.

Three-phase oil-filled transformer, not used, year of manufacture 2009, Manufacturer MF Trasformatori s.r.l. Rated power 2000 kVA, Cooling: ONAN, Frequency: 50 Hz, Total weight 4680 kg, Primary side: Voltage 6000 V, Current 192.4 A, Secondary side: voltage 2x725 V, non-current 2x796 A

Rated power 800 kVA, Cooling: ONAN, Frequency: 50 Hz, Total weight 2440 kg, Primary side: Voltage 6000 V, Current 77 A, Secondary side: Voltage 2x725 V, non-current 2x319 A