Your found location: Latitude 0.0 + Longitude 0.0

Manufacturer:
(Category: 1300)

ABB 40
ABL 1
ACE 1
ADL 1
AEG 13
APE 13
APV 25
Aro 2
AVE 5
AZO 1
BBC 1
BC 2
BDK 1
BFG 1
BHT 1
BKW 1
BMI 1
BOA 1
BOFA 13
BRB 1
BTD 1
BTS 1
BWT 2
BXL 1
CEM 1
CMS 2
CTA 1
CTR 1
CTS 5
DEK 1
DHM 2
DIV 1
DKF 1
DSM 1
DT 2
DVP 2
ED 1
other machines and plants
date: 31.03.2023 add to watchlist
Machine: RELBO LUBRIFICATORE DIRECT Lubricator
item-No.: 161098579
New in: 2015
used

Inv. Num. : 6446 Type: LUBRIFICATORE DIRECT Producer: RELBO Generated: 2015 Parameters: Vertical line: 1200 mm Horizontal line: 1150/1400 mm

other machines and plants
date: 31.03.2023 add to watchlist
Machine: DATEL  powder-coating facility
item-No.: 161098586
used

Inv. Num. : 6380 Type:- Producer: DATEL Generated: Parameters: Equipment: Technical documentation The line consists of: - Application cabin - Fuel gas furnace (internal dimensions - width 2000 mm / depth 2000 mm / height 2700 mm) - 3 loader wagons (internal dimensions - width 1400 mm / depth 1800 mm / height 2500 mm) - 2 interchangeable modules for color powder Size of the part to be painted: - Height: max. 2,200 mm - Width: max. 1,500 mm - Depth: max. 1,500 mm The application cabin is equipped with: - Fire extinguishing equipment - Powder return technology (there is no waste the powder continues to circulate) - Runway rails - Version in stainless steel - Filter unit for returning the air into the hall Kiln: -Gas - Equipped with a function for drying parts (110 degrees Celsius) - Runway rails

other machines and plants
date: 31.03.2023 add to watchlist
Machine: BEIJING YC DIGITTECH YCK-2A Card punching machine
item-No.: 161098597
New in: 2013
used

Inv. Num. : 6336 Type: YCK-2A Producer: Beijing YC Digittech Generated: 2013 Parameters: Compressive force: 1500 kg Material dimensions: 85.6x54 mm Machine height: 1600 mm Machine length: 700 mm Machine width: 1100 mm Machine weight: 600 kg Productivity: 3500 cards/hr

other machines and plants
date: 31.03.2023 add to watchlist
Machine: VSP-KOVO 1020/108 Station for pressing in guides
item-No.: 161098598
New in: 2020
used

Inv. Num. : 6332 Type: 1020/108 Producer: VSP-KOVO Generated: 2020 Parameters: workpiece dimensions: 65 x 65 x 210 cm overload: 60 kN Machine height: 3000 mm Machine length: 1200 mm Machine width: 3000 mm Machine weight: 2500 kg Equipment: Control panel KTP900 Basic Table drive IndraDrive 02V02 GSDML V2.1 Press unit SM-Profibus-DP

other machines and plants
date: 31.03.2023 add to watchlist
Machine: KISUN Lackiermaschine für Wasserlacke und UV-Härtung Coating machine for water-based paints and UV curing
item-No.: 160723496
New in: 2018
used

Inv. Num. : 6409 Type: KDC-N24 R2T Producer: KISUN Generated: 2018 Parameters: Electrical connection: 240 V Power consumption: 21 kW Compressed air: 6 bar Length: 6120 mm Width: 1070 mm Height: 1370 mm Equipment: Loader Termo Air Dryer Uv Spare screen cylinder and doctor blade chamber Discharger format: 610 x 750 mm (B2) Minimum. Size: 297 x 420 mm (A3) Paint layer height: 6-14 microns Painted material thickness: 120-400 g/m2

other machines and plants
date: 31.03.2023 add to watchlist
Machine: S.A.F. DBS-200RCS Sandblasting machine
item-No.: 160723500
New in: 2012
used

Inv. Num. : 6410 Type: DBS-200RCS Producer: S.A.F. Created: 2012 Parameters: Machine dimensions: 11.5 x 5.15 x 3.86 m The line consists of: - Blasting chamber - Dust collector OP 9 - Blowgun - Exhaust fan - DONALDSON TORIT filter cartridges -Lift - Two-stage abrasive cleaner - Summary conveyor belt - Electric control panel with control panel - Compressor ALMIG BELT 37-8 - Automatic steam trap Bekomat 13 - Compressor BELT 4-37

other machines and plants
date: 31.03.2023 add to watchlist
Machine: MAVET UKZ-1/305 Ultrasonic Cutter
item-No.: 161000569
New in: 2017
used

Inv. Num. : 6484 Type: UKZ-1/305 Producer: MAVET Generated: 2017 Parameters: Power consumption: 2.49 kW Number of robot axes: 6pcs Robot reach: 1420 mm Load capacity: 12 kg Weight: 428 kg Equipment: Robot Fanuc M-10iA/12

other machines and plants
date: 31.03.2023 add to watchlist
Machine: COMARME MARCHETTI GEM-52 T Forming, filling and sealing line
item-No.: 160427539
New in: 2004
used

Inv. Num. : 6352 Type: GEM-52 T Producer: Comarme Marchetti Created: 2004 Parameters: Weight: 77 kg

other machines and plants
date: 31.03.2023 add to watchlist
Machine: WISTA VIKOMT 1515-P-F Blasting
item-No.: 159854658
New in: 2014
used

Inv. Num. : 6181 Type: VIKOMT 1515-P-F Producer: WISTA Created: 2014 Parameters: Length: 1500 mm Width: 1500 mm Height: 800 mm Equipment: Pressure vessel (50l) Turntable Van

other machines and plants
date: 31.03.2023 add to watchlist
Machine: KRAINTEK HX-360-W3/OT/LT+VT1 Car wash
item-No.: 160308082
New in: 2020
used

Inv. Num. : 6295 Type: HX-360-W3/OT/LT+VT1/800x1150x650 Producer: KRAINTEK Generated: 2020 Parameters: Basket size: 470x850x310 mm Basket capacity: 70 kg Height: 3450 mm Depth: 8277 mm Length: 11640 mm Weight: 15000 kg

other machines and plants
date: 31.03.2023 add to watchlist
Machine: KRAINTEK HX-360-W2/OT/LT+VT1 Car wash
item-No.: 160308083
New in: 2020
used

Inv. Num. : 6296 Type: HX-360-W2/OT/LT+VT1/800x1150x650 Producer: KRAINTEK Generated: 2020 Parameters: Basket size: 470x850x310 mm Basket capacity: 70 kg Height: 3450 mm Depth: 8277 mm Length: 11640 mm Weight: 15000 kg

other machines and plants
date: 31.03.2023 add to watchlist
Machine: OMNITRAC 2-50 Laser measuring device
item-No.: 160302711
New in: 2018
used

Inv. Num. : 6294 Type: 2-50 Producer: OmniTrac Generated: 2018 Parameters: Linear range (diameter): 50 (100) m Minimum measuring distance: 0 mm Machine height: 430 mm Machine length: 198 mm Machine width: 198 mm Machine weight: 10.9 kg

other machines and plants
date: 31.03.2023 add to watchlist
Machine: R.M.P.A. HP 100 Eco Foaming device
item-No.: 160670878
New in: 2015
used

Inv. Num. : 6384 Type: HP 100 Eco Producer: R.M.P.A. Generated: 2015 Parameters: The machine is in good technical condition.

other machines and plants
date: 31.03.2023 add to watchlist
Machine: TEKA WNA 3500 AL Wet separators
item-No.: 159181070
New in: 2008
used

Inv. Num. : 4765 Type: WNA 3500 AL Producer: Teka Created: 2008 Parameters: Connection voltage: 400 V Air volume flow: 2900 mÂł/h Water filling capacity during operation: 180 cmÂł Water consumption per operating hours: 6 cmÂł Vacuum: 3200 Pa Current type: 3 Ph Current consumption: 8.1 A Protection class: IP54 ISO Class: F Machine dimensions: 1050 x 1360 x 2635 mm Machine weight: 600 kg

other machines and plants
date: 31.03.2023 add to watchlist
Machine: SUMMA MCL-OSKM Clothesline
item-No.: 159441204
used

Inv. Num. : 6067 Type: MCL-OSKM Producer: SUMMA Generated: Parameters: Control system: SIEMENS SIMATIC Machine dimensions: 4000 x 3650 x 1950 mm Weight: 930 kg Carousel diameter: 1150 mm Height of the working area (without fan/with fan): 550/390 mm Batch: 12 pcs/basket Basket load: max. 150 kg Degreasing bath volume: 350 liters Degreasing bath yield: 50 liters Flush bath volume/yield: 300/50 liters Volume of the fog tank: 200 liters Pump capacity: 150 dm3/min Bath temperature: max. 60°C

other machines and plants
date: 31.03.2023 add to watchlist
Machine: MAUTING UKM 2004 DE-PL Smokehouse
item-No.: 159335257
New in: 2006
used

Inv. Num. : 6021 Type: UKM 2004 DE-PL Producer: MAUTING Created: 2006 Parameters: Number of smoking trolleys: 4 pieces Rated current: 95 kW Size of the smoking trolley: 800x800 mm Doors on both sides Heating is provided by a register for heated water via gas/electric boiler or hot water The smoke generator is equipped with a smoke scrubber Wood chips are used to produce smoke (different varieties possible) The smokehouse is equipped with water and chemical distribution for the rehabilitation of the chamber and the periphery

other machines and plants
date: 31.03.2023 add to watchlist
Machine: EKOL  powder coating facility
item-No.: 158575709
New in: 1999
used

Inv. Num. : 5852 Type: Producer: EKOL Created: 1999 Parameters: size of parts: 3200 x 800 x 1500 mm Load capacity of the conveyor: 50 kg Conveying speed: 1.2 m/min Number of shades: 10 Hinge spacing: 400 mm Equipment: Heating medium gas Material: Steel Line components : Continuous conveyor DPP 1/400 Pretreatment tunnels (degreasers and zinc phosphate) Kiln automatic paint booth Wagner Manual paint booth Oven QUINS wastewater treatment plant Equipment for the production of demineralized water Technological process: Hanging parts on the conveyor belt Passage through the pretreatment tunnel (degreasing / rinsing 1 / rinsing 2 / activating / Zn phosphate / rinsing 3 / rinsing 4 / passivating / demi rinsing) Dry Cooling PP Application Wagner automatic paint booth - stainless steel version Wagner hand painting booth - stainless steel versi ...

other machines and plants
date: 31.03.2023 add to watchlist
Machine: KOVO STANEK TZP 4-7.5 Continuous blasting machine
item-No.: 146759199
New in: 2008
used

GO 2017 Maximum length of sheet: 3000 mm Maximum sheet width: 1500 mm Maximum profile size: 3000 mm Maximum height of blasted parts: 120 mm Minimum table capacity: 4500 kg Number of wheels: 4 pieces Wheel force throw: 7.5 kW Maximum spindle speed: 2900 rpm Rated current: 50 kW Filter capacity: 5000 m3/h Facilities: Technical documentation

other machines and plants
date: 31.03.2023 add to watchlist
Machine: LEITZ PMM 12 10 6 3D measuring machine
item-No.: 153259999
New in: 1999
used

Inv. Num. : 5461 Type: PMM 12 10 6 Producer: Leitz Created: 1999 Parameters: Axes X/Y/Z: 1200/1000/600 mm Maximum table load: 1200 kg Machine height: 3800 mm Machine length: 3500 mm Machine width: 2400 cm Machine weight: 6 t equipment: Technical documentation Automatic change of the measuring keyboard (7 positions - including various touches)

other machines and plants
date: 31.03.2023 add to watchlist
Machine: SCHLOTTER GALVANOTECHNIK  Galvanising line
item-No.: 161140040
New in: 1994
used
Price: 33.865 €

SCHLOTTER Galvanotechnik galvanising line, manufactured in 1994 in Austria, is designed for professional electrochemical treatment on various types of workpieces. During the treatment, a special coating is produced which protects the workpieces from mechanical damage and corrosion. The SCHLOETTER Galvanotechnik galvanising line, characterised by its high reliability and low operating costs, is equipped with a modern control system, which makes it possible to control the ventilation system and to adjust parameters such as process time in the galvanising baths and heater on/off times. The galvanising and phosphating line is fully complete and ready for operation. Equipment of the SCHLOTTER Galvanotechnik automatic galvanising plant - tumbler trolleys (6 sets) - trolleys for suspension system (5 sets) - centrifuges (2 pcs.) - rectifiers (3 pcs.) - workpiece dryer - ventilation s ...