veneer machines used for sale (104)

A very well-preserved veneer press from the company Joos is offered. The key data of the press are: Press force max. 1200 kN Adjustment range 10-100% Total baling area 3100 x 1350 mm Spec. Pressure at full design 3.0 daN/cm² (kg/cm²) 6 cylinders 80 mm diameter 400 mm stroke Operating pressure hydraulic 398 bar Height of the pressing chamber 400 mm Medium heating plate 3100x1350 gold 130°C Temperature control unit 18 kW Coloured touch panel

The machine must be dismantled and loaded by the buyer himself. The transport and loading equipment that may be required for this purpose must be organized and provided by the buyer himself. The collection must take place by 11.12.2026 at the latest. If the machine has not been picked up by this date, it will be relocated or disposed of at the buyer's expense if necessary. A feed motor has been retrofitted to the machine. see pictures. Auction-ID: A7-51502-134

Cutting length: 3100 mmCutting height: 45 mmMotor output: 1,8 kWDimensions (L/W/H): mmmachine weight ab.: 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Veneer saw long fence LZ 5/2 - 3500, fine-cutting saw with joining unit (planing unit) and veneer stop table Robust mechanical engineering from Langzauner A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3500mm Cutting and joining height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear storage table with penetrating finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display Format table is very solidly built and runs on parallel circular guides, it is slightly offset to the right so that cross-sections can be made on the veneer packages on the left side Angle stop on the stop table and on the front shelf for head cuts of the veneer packages Special equipment with rack and pinion compensation for the pressur ...

For sale is a veneer assembly machine FWJ 900 from Kuper. The machine is visually and technically in good condition. In 2020, a new compressed air/maintenance unit was installed for 155€ by the company Kuper. -Passage width approx. 920 mm -Veneer thickness approx. 0.4 - 2 mm -Feed speed approx. 15 m/min

Joos HP 90 Hydraulic veneer press with electric combi heating plates For sale is a well-maintained veneer press with the following data: -Pressing area 2.55m x 1.35m -Height of the pressing room 0.4m -Operating pressure 355 bar -Basic dimensions 2.98m x 1.53m x 2.1m

Used veneer guillotine shear (veneer cutting machine) CAGLIO (Luigi Caglio, Italy), model TRC 3200, for cutting veneer sheets in a straight line with precision. It has a cutting length of 3200 mm, a hydraulically operated clamping beam that holds the veneer sheet during cutting, and a motorised back gauge (guide) for fast and accurate adjustment. The base, the blade carrier and the table are made of cast iron. Technical data: Maximum cutting length: 3200 mm Cutting height: 100 mm Hydraulic unit pump motor: 7.5 HP Hydraulic pressure, adjustable: 60 - 120 atm Weight: 3800 kg For more information and for the condition of the machine, please contact us. Auction-ID: A7-50988-126

Code: 0493 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Code: 0491 Brand: KUPER Model: FW MINI 630 - CE Standard Thread splicer for veneer,for joinery workshops, doors, furniture, veneer, custom-made furniture, panels and various items - CE Standard Technical data Arm mm 630 Veneer thickness mm 0,4 - 2 Feeding 7 mt/min Voltage 220 volts Overall dimensions: mm 850 x 370 x 400 h Weight kg 31

Code: 0489 Brand: CASATI MACCHINE Model: 3100 - CE Standard Automatic veneer guillotine for joinery, furniture, doors, window and door frames, sliced veneers and other applications – CE Standard Technical data: Sturdy structure Hydraulic power unit for blade cutting movement Cutting length 3100 mm Electrically operated rear stop Cutting inspection light Pump motor 4 Hp Register motor 0,5 Hp Safety photocells Side guide for angled cuts Overall dimensions mm 4150 x 1600 x 1500 h Weight kg 3200

Copper-veneer assembly machine FW/J 920-Bj.95 -Front and rear wooden pads are no longer available - Instruction manual available

Shearing Joining & Fine Blanking Machine FM18-3100 cuts wood-based materials, veneers, chipboard, fibre and plastic panels, Hard paper, foils, thin metal sheets and acrylic glass - Angular, joint-tight and splinter-free The machine has been certified by the BG "Holz" in accordance with the principles for the Testing of the occupational safety of technical work equipment examined. It bears the "GS" mark for tested safety. -Operating instructions available

Code: 0477 Brand: EMME ELLE - ITALY Model: T.O. 3200 - CE Standard Hydraulic veneer guillotine for joinery, furniture, doors, window and door frames, slitting and other applications – CE Standard Technical data: Sturdy construction The hydraulic power unit controls the movement of the cylinders to move the pressure plate and the blade Cutting length 3220 mm Cutting height 100 mm Electrically operated rear stop – Max depth 750 mm – Min depth 20 mm Power unit pump motor 7,5 Hp Rating motor 0,75 Hp Safety photocells Weight kg 4300

Chopper, Faz Model, Manufactured by Josting

A Kuper zigzag veneer splicing machine is offered. Overhang: 1150mm, working width: 1150mm, veneer thickness range: approx. 0.3mm-3mm, feed rate: approx. 10-30m/min, feed drive power: 0.55kW, working height: approx. 980mm, machine dimensions X/Y/Z: approx. 2160mm/780mm/1650mm, weight: approx. 540kg. Documentation available. Inspection possible by appointment.

This FISCHER & RüCKLE Veneer scissors was manufactured in 2007. It features a milling unit and a gluing unit for butt joint gluing, enhancing its functionality. The machine includes three replacement knives, a milling cutter, and a gluing station. Recently updated with new energy chains in 2020, it measures 7m in length, 3m in width, and 2m in height. Contact us for more information about this machine.

This Fischer & Rückle FZR 21 was manufactured in 2015. A used veneer crossfeed splicing machine, it efficiently splices parallel jointed veneer strips into endless or component-matched veneer faces. It handles veneer strip lengths from 350 to 2150 mm and widths up to 600 mm, with a thickness range of 0.3 to 1.5 mm. Features include a semi-automatic feeding device and a horizontal pressing system for tight glue joints. For more information about this machine, please reach out to us.

Single-knife veneer cutting machine JOSTING EFS 2800, built in 1975, very good used condition, in use until 02/2026, Spare blade Price from location

Veneer Saw Scheer Type FM 3 Machine No. 113462 Cutting length 3000 mm Cutting height maximum 55 mm Maximum insertion height 60 mm Saw blade diameter maximum 180 mm Saw blade on the machine diameter 150 mm Motor power 1.65 kW Feed manual Height adjustment with handwheel With rear table support 3120 mm x 600 mm Dimensions 3450 mm x 1130 mm x H 1400 mm Weight approx. 450 kg

TECHNICAL DATA: Usable width: 1160 mm Installed power: 0.50 kW

Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300