1830 results

similar results found in category veneer machines

item-No.: 143542626
KRAUSS-MAFFEI 2.700 Tonnen IIM Baujahr 1999. Noch in der Produktion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85.000 x 1.000 PLATEN GRÖßE 3.020 x 2.600 mm'r'nDISTANCE BETWEEN TIE BARS (h x v) 2.100 x 1.700 m'r'nTRAVEL OPENING 2.800 mm'''nDAYLIGHT MAX 3.900 mm'nSCREW DIAMETER 150 mm'nINJECTION VOLUMEN 11.133 cm3'r'nINJECTION PRESSURE 1.707 bar'nNOMINAL CAPACITY OF PUMP MOTOR  ...
item-No.: 143542625
KRAUSS-MAFFEI 2.700 tons IIM built in 1999. Still in production. Technical details CLAMPING FORCE 27.000 kN WORKING HOURS approx. 85.000 PLATEN SIZE 3.020 x 2.600 mm DISTANCE BETWEEN TIE BARS (h x v) 2.100 x 1.700 m TRAVEL OPENING 2.800 mm DAYLIGHT MAX 3.900 mm SCREW DIAMETER 150 mm INJECTION VOLUMEN 11.133 cm3 INJECTION PRESSURE 1.707 bar NOMINAL CAPACITY OF PUMP MOTOR 250 kW YEAR OF BUILDING 1999
item-No.: 143542624
KRAUSS-MAFFEI KM 350/1900 C1 , a'o 2000 . Diese Maschine wird vollständig geprüft repariert und getestet geliefert und kann unter Strom angezeigt werden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Roboter-Schnittstelle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  ...
item-No.: 143542623
KRAUSS-MAFFEI KM 350/1900 C1 , año 2000 . This machine will be delivered complete checked repaired and tested and can be shown under power ! Equipment: 6 core-pullers, robot interface. Technical details CLAMPING FORCE 3.500 kN YEAR OF BUILDING 2000 PLATEN SIZE 1.100 x 1.120 mm DISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm MIN. MOULD HIGHT 530 - 1.450 mm TRAVEL OPENING 920 mm DAYLIGHT MAX 1.300 mm SCREW DIAMETER 60 mm INJECTION PRESSURE 2.420 bar INJECTION VOLUMEN 769 cm3 SHOTWEIGHT 700 grms NOM ...
item-No.: 143542622
Zusammenfassung von ENGEL tie-bar-less IMM, Baujahr 2004, technische Details: "R'nINSTALLED HEATING CAPACITY 34 kW'r'nYEAR OF BUILDING 2004'nWORKING HOURS ca. 65.000'r'nTRAVEL OPENING 950 mm' •nINJECTION PRESSURE 1.820 bar,-r-nINJECTION VOLUMEN 1.040 cm3'r'nNOMINAL CAPACITY OF PUMP MOTOR 45 kW'r'nMIN. MOULD HIGHT 650 mm-NR-PLATEN GRÖßE 1.400 x 1.030 mm
item-No.: 143542621
Summary 400 tons ENGEL tie-bar-less IMM built in 2004 Technical details INSTALLED HEATING CAPACITY 34 kW YEAR OF BUILDING 2004 WORKING HOURS approx. 65.000 TRAVEL OPENING 950 mm DAYLIGHT MAX 1.600 mm SCREW DIAMETER 70 mm INJECTION PRESSURE 1.820 bar INJECTION VOLUMEN 1.040 cm3 NOMINAL CAPACITY OF PUMP MOTOR 45 kW MIN. MOULD HIGHT 650 mm PLATEN SIZE 1.400 x 1.030 mm CLAMPING FORCE 4.000 kN
item-No.: 143542620
Der Engel 60, um die Spannkraft von Engel auf 800 kN zu erhöhen, erhöhte die Spannkraft auf 800 kN. Maschine komplett geprüft und getestet mit neuem Gusskörper auf der Spannseite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  ...
item-No.: 143542619
Engel 60 to tie-bar less IMM increased clamping force to 800 kN by Engel. Machine complete checked and tested an with new cast body on clamping side. Technical details YEAR OF BUILDING 2003 CLAMPING FORCE 800 kN PLATEN SIZE 670 x 600 mm TRAVEL OPENING 457 mm SCREW DIAMETER 35 mm INJECTION VOLUMEN 154 cm3 INJECTION PRESSURE 1.581/2.190 bar WORKING HOURS 45.855
item-No.: 143519013
Plastic grinding mill. Power: 15Cv. Dimensions: 1.000mm wide, 1.300mm long, 2,200mm high.
item-No.: 143514967
2 Colors Size 52 x 74 cm ROLANDMATIC II Quick action plate clamps Bacher register clamps Powder spray MABEG feeder
item-No.: 143514964
-
2.900 €
country-de DE
gebraucht, top Zustand wenig gebraucht aus 1 Mann-Betrieb kompletter Zeichnungssatz vorhanden Fabrikat Leitz Typ Wendeplatten Holzstärke 68 Eurofalz Glasfalzhinterlüftung Stützzapfen BG-Test auf Büchsen verschraubt Blendrahmenwerkzeug: Blendrahmen Zapfen aufrecht unten Blendrahmen Zapfen aufrecht oben Blendrahmen Schlitz quer Blendrahmen innen aufrecht und oben Blendrahmen innen unten Flügelwerkzeug: 2 - 1/2- fach Zapfen Flügel innen Flügel Schlitz aufrecht Flügel Zapfen quer F ...
item-No.: 143453444
-
3.960 €
country-de DE
Furnierpresse Langzauner Pressfläche 2550mm x 1300mm Elektroheizplatten Goldeloxiert LxBxH 300cm x160cm x190cm Gewicht 3500kg Obere Heizplatte hat kleine Verzögerung beim Aufheizen Aenderungen, Irrtuemer, Zwischenverkauf vorbehalten ! Service/Ersatzteile durch MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technik GmbH Maschinenbau Mühlematte 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 143453445
-
BN 3.960 €
country-de DE
Veneer press Langzauner Pressing area 2550mm x 1300mm Electric heating plates Gold anodized LxWxH 300cm x160cm x190cm Weight 3500kg Upper heating plate has small delay during heating Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 143434415
-
3.500 €
country-it IT
Code: 0734 Brand: SCM Model: BASIC 1 Automatic edge banding machine for wood, veneer, pvc, solid wood edges Technical data: Working height mm 8-40 Bending material thickness mm 0,4 - 3 Feed speed m/min 8 Minimum panel length mm 140 Minimum panel width mm 60 End cutting unit: Rotation speed rpm 10000 - Motor power Kw 0,6 End trimming unit : Rotation speed rpm 27000 - Motor power Kw 0,5 Tilting cutters 12° Overall dimensions: mm 1700 x 700 x 1250 h Weight kg 470
item-No.: 143432367
Overview of the aggregate assembly: - Joining milling unit 2 X 2.2 Kw 200 Hz - Gluing unit A3 - Cap-unit chamfer/straight 2 X 0.18 Kw - Milling unit 2 X 0.27 Kw return - Drawing blade with quick-release heads - Glue joint drawing blade Technical data: - Feed of 11 m/min - Working height of 950 mm - Pneumatic connection - min. 6 bar - Total length of 3,650 mm - Workpiece width min: - For workpiece thickness 8-22mm x 70 mm - For workpiece thickness 23-50mm x 120 mm Depending on the workpiece length  ...
item-No.: 143356540
2 Colors + Version Straight machine Conventional dampening Weko powder spray Bacher register clamps
item-No.: 143356536
2 Colors + Version Straight machine KOMPAC III dampening Weko powder spray Bacher register clamps Cleaned and checked
item-No.: 143294329
Clamping Force: 3500 kN Tie Bar Clearance (H x V): 750 x 750 mm. Mould Opening Stroke: 850 mm. Mould heigh min/max: 380/1230 Screw diameter: 70 mm. Injection pressure: 1620 bar. Core puller: 2 Air ejection: 4 Hours: 69.662 H. Oil Tank Capacity: 680 l. In working condition.
item-No.: 143294325
Clamping Force: 2750 kN Tie Bar Clearance (H x V): 750 x 750 mm. Mould Opening Stroke: 850 mm. Mould heigh min/max: 345/1195 Screw diameter: 60 mm. Injection pressure: 2205 bar. Core puller: 1 Air ejection: 4 Hours: 86.060 In working condition.
item-No.: 143246193
+ Version KOMPAC dampening (2010) Quick action plate clamps Powder spray
item-No.: 143200407
Flat Monoprecis 114 S Rectifier Electric uphill and downhill Courses X :350mm Y:180mm Z:400mm Table: 250mm 150mm
item-No.: 143200400
-
8.500 €
country-pt PT
Plana Chevalier FSG-1224AD Rectifier Hydraulics and Electrical With digital on the Z axis and automatic incrementing Table measurements: 600mm x 300mm Courses: X: 650 mm Y: 400 mm Z: 300 mm With automatic pass and incrementing Machine in good condition
item-No.: 143200391
-
3.500 €
country-pt PT
Flat Rectifier JAKOBSEN SJM 618 Description: Rectification capacity: 500 x 180mm Maximum center height of the wheel to the table surface: 500 mm, Work desk surface: 450 x 250 mm, Longitudinal speed: 30 m / min, BraillON magnetic table dimension: 500 x 180 mm 2800 rotations per minute Approximate weight: 1200 kg Dimensions (lxwxh) approx .: 2400 x 1250 x 1750 mm
item-No.: 143200378
-
3.500 €
country-pt PT
Mó: 180x32x20mm Engine: 1.1kw 2850 RPM spins Machine Dimensions: 1500 x 1100 x 2000 mmRectificara Plana Monoprecis Made in France Electric ascent and descent X: 450mm Y: 200mm Magnetic table 360mm x 160mm Machine Weight: 1000Kg
item-No.: 143200375
-
9.000 €
country-pt PT
Flat FreePort Rectifier Model: SGS 2040AHD Magnetic table: 1000mm x 500mm Automatic pass-through Courses: X:1100mm Y:510mm Z:550mm Year: 1997 Engine 10 HP 380V Automatic lubrication With hydraulic and water tank
item-No.: 143157721
4 Colors Year 1990 Straight Chromed cylinders ROLANDMATIC RCI II McKinley rollers In production Available immediately
item-No.: 143113812
4 Linien von 3 Prozesszeichnung für Ringspinnerei oder OE-Anlage. 1995/97/99/2000 Jahr, RsB951, 2. Durchgang SB951, 3. Durchgang (Finisher) D30, 3zeilen.
item-No.: 143113811
4 Lines of 3 process drawing for Ring spinning or OE plant. 1995/97/99/2000 year 1st pass RSB951, 2nd pass SB951, 3rd pass (finisher) D30, 3lines. 2 other lines RSB951 finishers.
item-No.: 142981569
2.700 to Spritzgiessmaschine KRAUSS-MAFFEI mit vielen, wertvollen Extras wie, Schiebetisch für Werkzeugwechsel, Roboter, Heisskanalzonen, Kaskaden, etc. Schneckendurchmesser 150mm, Spritzvolumen 11.133 cm3. Die Maschine kann noch in laufender Produktion besichtigt werden !
item-No.: 142981570
2,700 to injection moulding machine KRAUSS-MAFFEI with many valuable extras such as, sliding table for tool changes, robots, hot channel zones, cascades, etc. Screw diameter 150mm, spray volume 11,133 cm3. The machine can still be inspected in ongoing production !
item-No.: 142938548
Code: 0729-r-nBrand: SORMEC-ITALIA-Nr. Modell: T 90 - CE-Norm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 00 x 1300 x 1300 , Gesamtdruck-Ton 90-NN° 6 Kolben, 1,50 000 x 1300,-Nr. 3900.
item-No.: 142938547
Code: 0729 Brand: SORMEC-ITALIA Model: T 90 - CE standard Hydraulic hot press - CE standard Platen size mm 3000 x 1300 Total pressure ton 90 N° 6 pistons Opening mm 650 Motor power Hp 3 Equipped with boiler Weight kg 3900
item-No.: 142938525
-
24.000 €
country-it IT
Code: 0727 Brand: ITALPRESSE Model: PS / 65 Special hydraulic hot press characterized by a closed ring main structure Solid single ring structure Solid steel platens mm 3300x1400 Mylar tops coating N° 8 pistons Specific pressure up to 15 dN/cm2
item-No.: 142938526
-
24.000 €
country-it IT
Code: 0727-R-NBrand: ITALPRESSE-Nr. NModell: PS / 65- Druck bis zu 15 dN/cm2
item-No.: 142938440
-
1.400 
country-it IT
Code: 0725-R-NBrand: LICON - ITALIA-R-nModell: PM 25-r-N-Hydraulik-Kaltpressen, die in Aluminium beschichtet sind. nN°2 Kolben Durchmesser mm 190, 190, 190, 190, 190, 190, 190, 190, 190, 190, 190, 190, 190, 190, 190, 190, 190, 190, 1900, 190, 190, 190, 190, 190, 190, 1, 190, 190, 190, 190, 190, 1, 190, 190, 1, 190, 190, 1, 1, 1, 1, 1, 190, 190, 190, 190, 190, 1, 190 n n n n.
item-No.: 142938439
-
1.400 
country-it IT
Code: 0725 Brand: LICON - ITALIA Model: PM 25 Hydraulic cold press Platens mm 2500 x 1300 coated in aluminium N°2 pistons diameter mm 190 Thrust tonn 70 Overall dimensions: mm 2500 x 1600 x 1800 h Weight kg 2300
item-No.: 142804673
item-No.: 142804562
SPEROTTO RIMAR CONVEYOR STEAMER FOR FABRIC TYPE SG-0, YEAR 1992 WORKING WIDTH 1900 MM LENGHT 12 M WITH TWO STEAMING ZONES
item-No.: 142627392
3 x IMPIANTI CONTINUO (ISOTEX) COATING HEAD. YEAR 1990 WW 1.700 MM KNIFE OVER ROLLER TYPE (OVEN NOT INCLUDED)
item-No.: 142627387
CALATOR UNROLLING MACHINE ROLLER WIDTH 2.700 MM PORTABLE. TO BE USED AS UNROLLING MACHINE FOR KNITS IN FRONT OF A COMPACTOR OR ANY OTHER MACHINE. WITH E+L METAL DETECTOR
item-No.: 142627270
-
11.400 €
country-it IT
Code: 0715 Brand: OMMA - ITALY Model: PR GS 1400 - CE standard Calender sheeter roller press - CE standard - Year 2005 It runs pinching between the rollers, controlled by pneumatic pistons, different materials like laminate, veneer, papers, and Pvc sheets on flat surfaces glued boards coming from a glue spreader Working width mm 1400 Working height mm 850 Roller diameter mm 210 Working thickness 0 - 80 mm Independent motorisation on each impression roller for precise rotation without vibra ...
item-No.: 142580051
1 MCS hydraulic dyeing jigger type Maxi Jigger 3400, roller width 340 cm, working width 320 cm, maximal winding diameter 1400 mm, year 1989, maximal dyeing temperature 98 ºC, dye cycle controller TERMOELETTRONICA type JTronix JP70tc,
item-No.: 142580035
coater tower (chambered doctor blade system) PDC densitometer PQC Remote Control of Ink Zones and Register Komorimatic damping with Technotrans circulation and refrigeration Ink Temperature Control S-APC semi-automatic plate change Amr Kms automatic roller and blanket wash-up device powder sprayer Grafix IR-dryer and hot air extended high pile delivery serial equipment
item-No.: 142579926
Schnittlänge 3000 mm Schnitthöhe 45 mm Sägeblatt Durchmesser 180 mm Motor 1,8 kW Abmessungen ca. 4000x1150x1250 mm Gewicht 600 kg (Änderungen und Irrtümer in den technischen Daten sowie Zwischenverkauf vorbehalten)
item-No.: 142579927
Cutting length 3000 mm Cutting height 45 mm Saw blade diameter 180 mm Engine 1.8 kW Dimensions approx. 4000x1150x1250 mm Weight 600 kg (subject to changes and errors in the technical data as well as intermediate sale)
item-No.: 142579925
Machine No. 5545 Stand extension 920 mm Feed approx. 15 m/min Engine 0.18 kW Air consumption approx. 10 L/min Heating 200 W Dimensions approx. 1200 x600x1500 mm Weight 190 kg Location 32683 Barntrup (subject to changes and errors in the technical data as well as intermediate sale)
item-No.: 142579924
Maschinen-Nr. 5545 Ständerausladung 920 mm Vorschub ca. 15 m/min Motor 0,18 kW Luftverbrauch ca. 10 L/min Heizung 200 W Abmessungen ca. 1200 x600x1500 mm Gewicht 190 kg Standort 32683 Barntrup (Änderungen und Irrtümer in den technischen Daten sowie Zwischenverkauf vorbehalten)
item-No.: 142535170
We have available for sell complete Clean Room 530 m/2, perfect condition!with panels sandwich, automatic doors, air filters, et
item-No.: 142535050
4 cylinders, Pressing area: 1,100 x 2,500 mm
item-No.: 142535003
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)