rubber machines used for sale (428)

Key data: 550 mm, 1500 mm

Mixing mill 550 × 1500 mm, manufactured by Bata in 1937. This historic machine is fully functional and can be used both in production and as an exhibition piece.

Key data: 300 mm, 600 mm

Diameter: 300 mm Length: 600 mm Surface: smooth NIP setting: manual Motor: 30 kW Siemens Dimensions: approx. 1700 x 1560 x 1635 mm Weight: approx. 3000 kg CE marked from 2018 (engine with reverse gear, knee emergency stop)

Laboratory press for test plates, make RUCKS, built in 1998, 2 floors electrically heated, Press force 440 kN, max operating pressure 250 bar

Powder machine Fabikat PEKU with 1000 mm passage width for powdering top and bottom for Plates, profiles, hoses, etc.

Sale of spare parts of EEK 125.22 V, including vacuum cylinder, screw and V-pump, 6 x TCU, Power cabinet with FU 165 KW

cold feed vacuum extruder Troester 90 mm x 18 D, with feed roller, drive 46 kW, pie speed 10 to 60 rpm, 5 TCU,

cold feed extruder - 60 mm x 18 D vacuum, with feed roller, drive 22 KW, screw speed 10 to 60 rpm, with gear pump, 5 TCU,

90s cold feed extruder, GE 90 x 16 D Vac, make Troester, with large hose / profile spray head, drive 52 KW Siemens AC, 4 TCU Siengle

Capacity 75 kg Output capacity max. 800 kg/h Blank weight 0.25 - 3100 g

120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024

Key data: 400 mm, 1000 mm

Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate

3 to 5-Roll calender Buzuluk Number of rolls: 4 pcs. Roll diameter: 150 mm Roll length: 400 mm

speed of feed:: 60 m/minfeed:: 5 - 99.999,9 mmcuts max.:: -- Schnitte/mcross-section width:: 5 - 90 mmcross-section heigth:: 5 - 90 mmCondition: Second-hand,Specification: Strip and tube cutting unit • Cutting unit: Impact blade cutting with cutting sleeves• Material diameter approx.: 5–90 mm• Conveyed by two drive belts• Distance between the belts max.: 90 mm • Belt adjustment via motor, controlled via control panel• Lower belt fixed, upper belt motor-adjustable• Belt contact length approx.: 500 mm• Contact width: 80 mm• With a maximum speed of approx.: 60 m/min• Electronic length measurement: 5 – 99,999.9 mm • Maximum cutting accuracy: +/- 2 mm• Cutting is performed by a servo motor: 1 kW• Power supply: 380/400V, 50Hz, 5kW• Material feed directio ...

clamping force: 350 kNinjection volume: 170 cm³screw diameter: 36 mmplaten size: 380 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 350 kN- Platen size: 380 x 300 mm- Heating power of the plates: 6 kW- Clamping/opening stroke: 200 mm- Clearance between the plates: 250 mm- Clamping direction: from belowInjection unit:- Pressure: 1,050 kg/cm²- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Max. screw speed: 30–110 rpm- Metering stroke: 165 mm- Injection: from above- Voltage: 3 × 400 V, 50 Hz, N, PE- Pump drive power: 11 kW- Hydraulic motor power: 10 kW- Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm- Weight ap ...

clamping force: 250 kNinjection volume: 134 cm³screw diameter: 35 mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 250 kN- Heating plate dimensions: 300 x 300 mm- Heating power of the plates: 5.3 kW- Clamping/opening stroke: 330 mm- Platen distance with heating plates at maximum: 380 mm- Clamping direction: from below- Side ejector: yes- Stroke of side hydraulic ejector: 100 mm- Ejector stroke/force: 70 mm / 24 kNInjection unit:- Increased injection pressure: 1,580 bar- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Screw length: 17.1D- Maximum screw speed: 20–480 rpm- Metering stroke: 140 mm- Injection: from above-  ...

clamping force: 800 kNinjection volume: 154 cm³screw diameter: 35 mmplaten size: 430 x 660 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 800 kN- Mould mounting area: 430 x 660 mm- Clamping/opening stroke: 450 mm- Maximum mould installation height without heating plates: 300 mm- Maximum plate spacing without heating plates: 750 mm- Clamping direction: from below- Ejector stroke: 130 mm- Ejector force: 40 kNInjection unit:- Increased injection pressure: 2,180 bar- Maximum injection volume: 154 cm³- Screw diameter: 35 mm- Screw length: 20D- Maximum screw speed: 20–400 rpm- Metering stroke: 160 mm- Injection: from above- Nozzle stroke:  ...

clamping force: 250 kNinjection volume: 134 cm³screw diameter: 35 mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 250 kN- Heating plate dimensions: 300 x 300 mm- Heating power of the plates: 5.3 kW- Clamping/opening stroke: 330 mm- Platen distance with heating plates at maximum: 380 mm- Clamping direction: from below- Side ejector: yes- Stroke of side hydraulic ejector: 100 mm- Ejector stroke/force: 70 mm / 24 kNInjection unit:- Increased injection pressure: 1,580 bar- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Screw length: 17.1D- Maximum screw speed: 20–480 rpm- Metering stroke: 140 mm- Injection: from above-  ...

clamping force: -- kNinjection volume: -- cm³screw diameter: -- mmplaten size: -- mmCondition: second-hand,Specification: C-frame injection moulding machine - second-hand, used as a spare parts source for cannibalising3x machines, model SAD 114/30- Year of manufacture: 1999- Problems with the control system1x machine, model Super AD 76/15- Year of manufacture: 2006- Problems with the control systemThere are 3 machines built in 1999 and 1 machine built in 2006 available.The price is per unit. If you purchase several unitsa package price can be arranged.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 200 °CTorque: - 0Dimensions (HxWxD): 680 x 1320 x 760 mmweight: 177 kgCondition: used,Specification: MDR Rheometer - second-hand for measuring the curing of rubber compounds with constant elongationtest functions- Sealed biconical matrices- Measurement of reaction torque with low friction- Excellent temperature stability and control- Repeatable and reproducible data- Measures dynamic propertiespower- Measurements of curing under almost real isothermal conditions- Excellent test sensitivity to mixing errors- Limited influence of the operator- Suitable for quality control or research and development- enterprise software- Sample cutter with constant volumeTechnical data- Testing standards: ASTM D5289 and ISO 6502- Temperature: ambient up to 200°C (392°F), optional 230°C (446°F)- Frequency: 1,667 Hz (100 CPM)- Elongation: 0.2°, 0.5° (standard), 1.0° ...

available Tunnel Batch off from VMI Description attached!

An injection molding machine Maplan for elastomers requiring repair is available. Design: hydraulic vertical press, hydraulic oil type: ISO VH 46 HLP, hydraulic oil filling quantity: approx. 600l, max. hydraulic pressure: 250bar, heating cartridge diameter: 25mm, insulation plate thickness: 14mm, max. operating temperature: 250°C, L/D ratio: 12:1, max. back pressure: 400bar, max. stroke: 260mm, vacuum pump capacity: 63m³/h, weight: approx. 17500kg, control system: B&R PLC. The temperature control units and the hydraulic clamping system have failed. Documentation available. An on-site inspection is possible.

Bed Size:Left to Right 393mm 15.5 in Front to Back 393mm 15.5 in Daylight Between Tables 559mm 22 in Daylight Between Heated Platens 353mm 13.9 in Heating Electrical Induction Heated Platen Sizes(Up To) 355mm x 355mm 14″x14″ Max Working Platen Temperature 220°C Main Ram Stroke(Up To) 355mm 14 in Hydraulic Circuit Pressure 70 Bars 1000 PSI Main Ram Pressing Force 41 T 40 Ton Main Ram pull back 2.2 T 2.2 Ton Closing Speed(Up To) 150mm/s Opening Speed(Up To)  ...

Factory rebuilt BIPEL 1500kN press with electrical equipment to suit 415 Volt, 3 Phase, 50 HZ, A.C. Supply. Generally in accordance with the following specification and comply with current supply of safety regulations :- Model 1500kN BIPEL Press Application Compression Moulding Mode of Operation Manual and Semi-Auto Frame structure Steel plate frame Cylinder type Double acting Pressing force kN 1500 Pull back force at circuit pressure kN 60 Operating height mm Approx. 930 Stroke mm 457 Daylight between Ta ...

3000kN BIPEL press with electrical equipment to suit 415 Volt, 3 Phase, 50 HZ, A.C. Supply. Generally in accordance with the following specification and comply with current supply of safety regulations Model 3000kN BIPEL Press Application Compression Moulding Mode of Operation Manual and Semi-Auto Frame structure Steel plate frame Frame number Cylinder type Double acting Pressing force kN 3000 Pull back force at circuit pressure kN 120 Operating height mm Approx. 930 Stroke mm 610 Daylight between Tables mm 1206 Heated Platens mm 841 Table size  ...

Key data: 3000 kN

Bed Size: Left to Right 785mm 30 1⁄2 in Front to Back 890mm 35 in Daylight Between Tables 1206mm 47 1⁄2 in Daylight Between Heated Platens 841mm 33 1⁄8 in Heated Platen Sizes(Up To) 760mm x 610mm 28″x24″ Max Working Platen Temperature 220°C 428F Main Ram Stroke(Up To) 610mm 24 in Hydraulic Circuit Pressure 210 Bar 3000 PSI Main Ram Pressing Force 305 T 300 Ton Maximum Pummel Diameter  ...

Key data: 3000 kN, 762 mm, 200 °C

Condition: Factory Rebuilt Model: 3000kN BIPEL Press Application: Compression Moulding Mode of Operation: Manual and Semi-Auto Frame structure: Steel plate frame Cylinder type : Double acting Push back cylinder(s) : Pressing force kN: 3000 Pull back force at circuit pressure kN: 300 Operating height mm : 820 Stroke mm :  ...

Press force max.:: 1.000 kNheating plates:: 480 x 520 mmelectrically heated:: 210 - 220 °Cpiston stroke:: ca. 400 mmno. of stages:: 1 Condition: Used, reconditionedSpecification: 4-column vulcanising press 480 x 520 mm, used- Clamping force: 100 t- Closing action: bottom-up- Heating plates: 2 electric plates- Two new heating elements- Plate heating temperature: up to approx. 210–220 °C- Heating plate dimensions: 480 x 520 mm- Distance between heating plates approx.: 400 mm (to be determined during refurbishment)- Working height of lower plate: approx. 1,100 mm- AC motor: 5.5 kW (to be determined during refurbishment)- New solenoid valves- New control cabinet with Siemens 7 touch panel Type KTP700 Basic- Siemens S7-1200 PLC system- Schneider frequency converter- One remote mainte ...

Year of construction : 2011 Control CC200 Locking force 400 tons incl. various accessories ( Piovan cooling unit, Tooltemp cooling unit, vacuum pump ) Machine comes directly from production

chamber volume: - literuseable volume: 1,6 literfriction: - motor drive power: 18,5 kWCondition: used - refurbishedSpecification: laboratory internal mixer - used- Chamber volume: approx. 1.6 l- Closing system: front door with pneumatic piston- Piston: pneumatic- Rotor geometry: tangential type- Oil-free self-lubricating sealing rings- New rotary union for water cooling- New main gearbox- New AC motor: 18.5 kW- Control cabinet: NEW, with Siemens S7-1200 PLC- Control panel with Siemens KTP 700 Basic touch panel- Cabling: NEW- New Siemens G120 frequency converter for variable speed- New remote maintenance device- Paint finish: according to customer specifications- With safety devices in accordance with applicable standards- Refurbished, with 12-month warranty, CE marking, operating and maintenance instructions in English or GermanT ...

roll diameter: 250 mmroll length: 600 mmrolls drilled: -- nip adjustment: -- drive power:: 46 kWCondition: usedSpecification: 3-roll I-calender 250x600 - used- Collin 3-roll I-calender 250x600Application: Smoothing/finishing of film materials up to 2 mm thick.Machine configuration: with unwinder upstream and rewinder downstream.- Upper and lower rollers adjustable for gap adjustment.- Roller diameter: 252 mm- Roller length: 600 mm (normally 500 mm)- Rollers 2, 3: temperature-controlled up to 320 °C- Heating power: 9 kW / roller- Speed: infinitely variable- Roller speed: +/- 8.6 rpm- Roll adjustment: 0 - 2 mm- Hydraulic unit: 2.2 kW- Oil cooler: 0.25 kW- Servo motor rated power: 1.4 kW / roll drive- Unwinding unit: 0.24 kW- Rewinder: 0.24 kW- Space requirement ...