rubber machines used for sale (414)

Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

Key data: 215 mm, 304

Pomini 12” x 8.5” Dump Extruder Type 12/8.5 Year of Manufacturing: 1993 Conical screw 300mm 215mm diam. Pneumatic crammer feed with DC variable speed motor Pelletizing head Without controls

Shaw Intermix K4 MK5 Mixer Body  NR5 Rotors Left-hand drop door Year 2018

Shaw Intermix K4 MK5 Mixer Body  NR5 Rotors Left-hand drop door Year 2018

Key data: 150 mm, 300 mm

Two Roll Rubber Mixing Laboratory Mill Manuf.: JRD Bipel 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Friction ratio 12:1 Grease lubrication Roller reverse system

Leica MC 120 Microscope

Key data: 300 mm, 600 mm

Iddon 24inch (600mm) x 12inch (300mm) Two Roll Mill Chilled cast iron rolls Rotary joints Right angle drive Radicon Gearbox Fulton Rotary joints AEI electric construction motor Safety bar back and front of mill

Key data: 50 mm

50mm Extruder Manufacturer: Rutil Screw diam. 50mm LD ratio 15:1 Max speed (50 Hz) 70rpm

Chiller 120KW Model ICS Unit: 1 off Aptus ATXA 046 G SE SN R454B LOW GWP refrigerant Air Cooled Chiller Design Criteria - A: 120kW at 6°C / 12°C / 35°C with Run / Standby HH Pumps & Buffer Tank Thermal duty - cooling 120kW Fluid type Water/Glycol Fluid supply temperature 6°C Fluid return temperature 12°C Site External Year 2022

Rius Yarn Winding Machine MTP- 600x300 Date: 07-05 380volts 50Hz 3 phase Manufacturer’s description Spooling and measuring machine, for special tapes as technical foams and cords The product can either be elastic or rigid Electronic frequency variator (inverter) Pre-choice electronic meter counter Electronic adjustable traverse motion up to 60 mm Beam blockage by means of pneumatic system, by pedal Positive feeder, synchronized with the main axis, and located in the center of the beam Automatic elevation movement of the thread-guide, according to the diameter of the beam Tachometer with speed indicator Start-up and stop by means of pedal The frame is mounted on wheels for an easy displacement of the machine.

RAPID 4535 Granulator 3 fly 2 dead blades 2 x Screens 1 x Frame Safety system Spare set of blades

Palamine 80ton Upstroke Press (hot press) Platen size: 1525x1150 Daylight gap between top and bottom platen 185cm Max. temperature on platens 600 degrees Type of platen heating Electric 240V Overall footprint size 2160cm x 1525cm

Combex 90 Strainer Extruder Manuf.: AZ / VMI Screw diam. 90mm LD ratio 10-1 AC motor 37kW 1475rpm Year 2010 Complete with Temperature Control Unit and Controls Full manual / documentation available

Key data: 160 liter

Qty 1 x Carter MK6 banbury internal mixer, Original year of manufacture 1995, New body 2012, Mixing chamber volume: 160L, Batch size: approx 150kg, Pneumatic hopper, 2 wing tangential rotors, S.S.A type dust stops, Hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, David Brown Semi-unidrive gearbox (1300rpm input, 50.4rpm output). Gearbox ratio 25.8:1, Power Rating 600kW. Complete with hydraulic powerpack and lubrication unit. Only used for softer compounds and in good condition. Currently without motor or electrical controls (can be quoted if required).

Key data: 80 liter

Qty 1 x Farrel Pomini model F80 banbury mixer, Serial number: 82/92, Original year 1981, but overhauled in 2011, Standard 2 wing rotors, FYH dust seals, Pneumatic hopper, Hydraulic drop door, Unidrive gearbox, 250HP fixed speed AC motor and starter, Rotor speed 35rpm, Upgraded operator controls (new in 2011). Complete with hydraulic unit and lubrication system. In good working condition.

IRHD Wallace Hardness Tester

Wallace Micro Indentation Tester

Metronic Test Machine With XYZ

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

Presses Manufactured by JR Dare Model PR100X2 Tonnage can be set between 20 and 100ton Platen size 16” (400mm) x 16” (400mm) Daylight 400mm. Pressure can be changed Bumps cycles platen temperature all programmable Mitsubishi controls 1x pump unit per pair of Presses Dims: 2.4m long x 1m deep x 2m high

Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel

REP Press Model V58Y10W Injection volume 1000ccm Platen size: 500 x 630 mm Year 2006 Power: 2550 kN Operating hours: 14570 Moveable traverse Fix traverse Sliding Table

ATOM Beam Cutting Press Model S325 T25 Capacity load 2500kg Working width 1600mm Working depth 600mm Max. pressure 25T Daylight between platens 400mm Max. stroke 350mm Motor 380/415V KW4 50Hz Year 1995 CE marked With manual

Guilopress

Autogil Cutter

Samco Clicker Press Model SB-20 400V, 3 phase, 50 cycles Year 2000 CE marked

John Marshall Cutter

Merkle Metzner Profile Automatic Cutting Machine Model XCL Material direction right to left Type of cut: Die cut/scissor cut Year 2002 Belt feed Width of belt 100mm Contact belt 200/400mm Poly-v belts Material acceptance: max. 100x30mm Drive Stepping motor, 3 phases Max. feed rate 40m/min Max. torque 420 Ncm Connection values Voltage 230V Pressure: 6 bar