mills used for sale (81)

1.0 pcs. Granulator incl. extraction and Soundproof enclosures Manufacturer: HERBOLD Year of Make: 1998 Type: SML35/42 S3/2-2 Insertion size: 410 mm x 350 mm Rotor diameter: 420 mm Engine power; 18.5 KW

1.0 pcs. Granulator incl. extraction and Soundproof enclosures Manufacturer: RAPID Year of Make: 2005 Type: 3590-KL6 Insertion size: 350 mm x 900 mm Rotor diameter: 900 mm Motor power; 22 KW

Low-speed pre-shredder for rubber, plastic, cables, composite material Well suited for exposing material composites, e.g. tires, old cables With integrated safety shear coupling to protect against foreign objects Rotor 600 mm diameter x 1450 mm working width Closed rotor with offset segment blades, mounted on cassettes 24 rotor blades, 2 stator knife rows Swivelling strainer basket, perforations of your choice With pressure device (pendulum swingarm) Drive cable 90- 200 kw

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width optionally as an open 3- or 7-blade rotor Drive motor 110 kw Folding device with electric winch

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm

An Aurora single-head pulverising mill, American made, offered as a complete powder-making line in excellent working order with its full dust extraction system. Pulverisers grind plastic pellets into a fine, free-flowing powder for rotational moulding and other polymer powder applications. The line includes the disc mill with feed hopper and vibratory feeder, an Eriez magnetic separator on the infeed, pneumatic transfer, cyclone and rotary valve discharge, Allen-Bradley PanelView controls with a full control cabinet, an access platform with handrails, and a jib crane with electric chain hoist (SWL 250kg) for disc changes. The dust extraction has external filter units with explosion relief venting in an ATEX-zoned installation, with full ducting and interconnecting pipework. Viewing is by appointment. Price on request.

A Wedco 28" tandem pulverising mill, American made, offered as a complete powder-making line in excellent working order with its full dust extraction system. Pulverisers grind plastic pellets into a fine, free-flowing powder for rotational moulding and other polymer powder applications. The line includes two 28" disc mill heads on a common frame, cyclone separators, blower and pneumatic conveying, a stainless steel storage silo with rotary valve discharge, a mezzanine platform with handrails and stairs, and a control panel. The dust extraction has external filter units with explosion relief venting in an ATEX-zoned installation, with full ducting and interconnecting pipework. Viewing is by appointment. Price on request.

Granulator AGRIFON 650 mm x 550 mm for crushing, for example of lumps. Technical data and equipment: • Year of construction: 2022 • Power: 22 kW • Open rotor • Grinder: 650 mm x 550 mm • With control • Unused machine • Spare parts such as sieve and knife can be supplied Condition: mint condition, used and fully functional.

Granulator ALPINA 800-150, suitable for secondary crushing. Technical data and equipment: • Drive power: 15 kW • Fully functional • With control • Optionally with blower and suction to the cyclone • Matching conveyor belt in stock After consultation, a test of the machine is possible. Condition: very good, used and fully functional.

5.5 kW, slot 260 x 260 mm. With or without conveyor belt possible

Mill, slot 260 x 260 mm. 5.5 kW. With feeding belts, immediately available

The Compact Series The new Wanner granulators of the C's series ("C" stands for "compact", "s" stands for "silent") offer practical solutions for almost all problems for the in-line recycling of sprues and defective parts in the production process. Due to the modular design, the granulators of the C's series can be easily adapted to the respective application or the needs of the company. Depending on the method of feeding the sprues, the disposal of the regrind, or the type of sprue used, Injection molding machine, the C's series from Wanner offers optimal solutions that can be adapted to your respective operating process through a variety of standard components. The optimised cutting geometry and the low rotor speed guarantee high-quality regrind with a low dust content, sound-insulated insertion shafts and The grinding chamber structure optimised in terms of structure-borne  ...

Dalian XK-550 roller mill complete (control, hydraulics, motor). Good condition, factory-assembled, ready for immediate use. Type: Dalian XK-550 Roller width: 550 mm Design: closed, industrial roller mill Working length: 1500 mm Roller speed: 18–30 m/min Speed ​​ratio: 1:1.27 Gap adjustment: hydraulic Max. gap: ~0.5–12 mm Capacity: 2–6 t/h Power: 110kW Material: hardened cast iron rollers

A total of two identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l, year of manufacture: 2015/2020. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

DREHER GRANULATOR, Mod. S26 - 41 GF, 410 mm rotor width, 260 mm rotor Ø, 11 kw drive (or lower), control panel, Average throughput rate 250 kg/h, Machine offered totally reconditioned, Suitable to reuse self-produced plastic scraps, installed power - used power in work: about 60-65% : 11 kW, availability: 3 weeks, working width: 410 mm, options available: lower power, capacity: 250 kg/h, conditions: reconditioned with sworn appraisal

GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm​ Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

With 55 kW Electrical motor and frame

Used HydReclaim Film Recycling System Manufacturer: AEC inc. USA Model 812 Electricity: 400 VAC, 50-60 Hz, 3-phase AEC Hydreclaim fluff weigh system Model 50 cubic foot

Granulator - Wittmann M2/CM5 (5 pcs.) Year of Make: 2011 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 1.1 kW 2 stator blades, 2 x push, rotor with the milling cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Granulate mill is used for grinding the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Granulator Rapid- G15035-DT (3 pcs.) Year of manufacture: 2013-2014 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 2.2 kW 4 stator blades, 15 rotor blades, the sieve - interchangeable Hopper inlet: 390x240 mm Grinding chamber opening: 340x170 mm Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Shini SG-2324-CE (2 pcs.) Year of Make: 2010 Location: Lodz, Poland Description: Slow-speed granulator with gearbox, with cyclones and dedusting Power: 6 kW 2 stator blades, 6 rotor blades, the sieve - interchangeable Hopper inlet: 260x240 mm Grinding chamber opening: 240x240 mm Automatic feeding of the regrind to the big bag Soundproofed mill All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Wanner D25.38 s Year of Make: 2011 Location: Lodz, Poland Description: Slow-moving granulator with gearbox, with cyclone and dedusting Power: 7.5 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Rotor and blade are cooled with water Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm Automatic feeding of the regrind to the big bag It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Moditec Digicolor Gplus1 / New, unused (2 pcs.) Year of Make: 2016 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Granulate mill is used for grinding the very hard details, waste - just like the crusher Power: 2.2 kW 6 stator blades, 1 x push, rotor with milling cutters Hopper inlet: 220x170 mm Grinding chamber opening: 240x180 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Hole for material case is prepared for connection with suction conveyor When the shredded molding is blocked/clamped in the cutting chamber, rotor knife will retract and it will restart to crush the molding. Drawer for material case with mixer All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technica ...

Dreher Delta 20/40 granulator for the size reduction of injection mouldings or hollow plastic bodies with a medium cross-section, rotor diameter 200 mm, working width 400 mm, 3 rotor blades and 2 stator blades, infeed opening 200 x 400 mm, cyclone and bagging opening with a diameter of 304 mm, capacity 40-180 kg/h, electrical connection 400V/50Hz, connected load of granulator 7.5 kW, connected load of extraction 0.75 kW, connected load of control unit 1.0 kW, machine floor space approx. 2500 x 950 mm (WxD), machine height approx. 1950 mm, machine net weight approx. 800 kg