other machines for mechanical handling used for sale (5,620)

Usable width: 500mm, infeed: 1100mm straight, 45° center section: 2500mm, outfeed: 900mm straight, conveying element: smooth plastic belt, cleat spacing: 200mm, cleat height: 50mm, drive drum diameter: 108mm, return roller diameter: 108mm, conveying speed: 0.2m/s, drive: 1 unit, without brake, drive arrangement: left side, construction height H1: 400mm, construction height H2: 2000mm, supports: mobile frame with swivel casters, guards: fully covered from below, from above only the inclined section, side guides: on both sides, length: 4500mm, width: 500mm, height: 1985mm, the belt conveyor is unused and new, with documentation. On-site inspection is possible.

Manual stainless steel mobile hoist, Sold without container, Capacity 120kg, Weight of the stem (kg): 190 , load capacity (kg): 120 , Weight of the gallows (kg): 190 , Dimensions (mm): 1645x800 H 1970, Maximum height (mm): 1620, Spacing dimensions (mm): 670, Minimum spacing dimensions (mm): 310, Max height (mm): 1620, Gap dimensions (mm): 670

weight max.:ca. 30 tgear diameter:320 mmweight of the machine ca.:3 x 950 kgdimensions of the machine ca.:3 x 2020 x 870 x 1100 mm

Technical description :DIESEL TRACTOR TRUCK - Weight 7.200 kgs- Length 3000mm- Width 1500mm- Height 2200mm- Axle interspace 1200mm- Track width 1000mm- Ground clearance 200mm

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: unicraft, Scissor lift table, flat form lift table type SHT1001G -Load capacity: 1000 kg -Platform: 1140 x 1460 mm -Dimension when retracted: Height 82 mm -Extended dimension: Height 760 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1140/1460/H210 mm -Weight: 341 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: G.POWER-LIFT, Scissor lift table, flat form lift table type SEL 5-803 -Load capacity: 500 kg -Platform: 1400 x 1000 mm -Dimension when retracted: Height 110 mm -Extended dimension: Height 910 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1000/1400/H200 mm -Weight: 215 kg

TONGS:. - capacity:35000 kg - Gripping range:2000 mm - Tare weight:2530 kgELECTRICAL SPECIFICATIONS:. - total power consumption:3 kW - mains voltage:400 V - mains frequency:50 Hz

TONGS:. - capacity:35000 kg - Gripping range:2000 mm - Tare weight:2665 kgELECTRICAL SPECIFICATIONS:. - total power consumption:1.1 kW - mains voltage:400 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - space requirements length:2770 mm - space requirements width:1700 mm

weight max. in kg:3000 kgweight:330 kgDimensions (L/W/H):800x320x430 mm

Used SIDEL seep-off depalletizer - Year 2013Technical Specifications & Performance DataThis Sidel Sweep-Off automatic depalletizer is designed to unload bottles and jars from palletized layers and transfer them efficiently to the downstream production line. Built in 2013, it is suitable for industrial packaging operations requiring reliable container handling at the start of a used bottling line.Manufacturer: SidelModel: Sweep-OffProduction capacity: up to 200 layers/hourProcessable pallet format: 1000 x 1200 mmContainer materials: Glass and AluminumHandled containers: Bottles and jarsInstalled power: 17.7 kWElectrical supply: 400 V, 3-phase + protective earth, 50 HzFull-load current: 32 AOperating pressure: 6 barAdvanced Automation & Control SystemsThe machine operates automatically through a Siemens S7-300 PLC and a B&R Panel PC 800 operator interface. This control architecture provide ...

Used SIDEL monocolumn Palletizer 200 Unit per hour -Year 2013Technical Specifications & Performance DataThe Sidel Monocolumn palletizer is an automatic palletizing solution designed for the efficient end-of-line handling of PET bottles in industrial packaging and beverage production environments. Built in 2013, this machine is configured to process a current bottle format of 2.0L and can reach a maximum performance of 200 layers per hour.Manufacturer: SidelModel: MonocolumnManufacturing year: 2013Container material: PETCurrent format: 2.0L bottlesMaximum capacity: 200 layers per hourSupported pallet: Eur-EPAL 800x1200 mmInstalled power: 73 kWWorking plane height: 800 mmAdvanced Automation & Control SystemsThe palletizer is controlled by a Siemens PLC, providing dependable automated coordination of palletizing movements and end-of-line material handling. The electrical system is configure ...

This is the main drive of a Power+Free conveyor system CSF, the machine is still unused in its original packaging. Assembly: PFC47-N, longitudinal dimension of upper section: 1,440mm, end distance left: 55mm, end distance right: 55mm, vertical dimension to drive/guide level: 313mm, additional vertical dimension: 213mm, vertical dimension below the centerline: 160mm, distance between the shown guide/suspension points: 420mm, additional vertical dimension in front view: 160mm, overall dimension in plan view: 1,500mm, internal/usable length in plan view: 1,400mm, edge distance left/right: 25/25mm, distance between two drive/running gear points: 240mm, lateral partial dimension: 240mm, suspension hole diameter: 14mm, total length of substructure, side view: 1,640mm, overall width: 820mm, with documentation. An on-site inspection is possible, machine not powered.

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammer ...

Chemical Weighing Tank c/w Weighing Platform Capacity: 1500L Weight of Platform: 500KG PLEASE CONTACT MS. NADZIRAH (+6017-9029972) OR MS. AYU (+6019-9224329) Located at F20, Meru, Klang, Selangor.

Two large and four small autonomous industrial vehicles are available, 1) 2x large clamp-type industrial vehicle, axle distance, front-to-rear: 2255mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3999mm, width: 2674mm, height (mast lowered): 3841mm, weight (without battery): 7,45t. 2) 4x small V-Shape industrial vehicle, axle distance, front-to-rear: 2026,5mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3367mm, width: 1920mm, height (mast lowered): 2295mm, weight (without battery): 2,7t. An on-site inspection is possible.

Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction, dust extraction blower, dust blower -Fan: centrifugal fan Ø 285 mm -Motor: ABB 0.55 kW -Speed: 2820 rpm -Fan wheel: Ø 285 x 20 mm -Inlet: Ø 110 mm -Air duct connection: Ø 75 mm -Dimensions: 400/350/H380 mm -Weight: 12.4 kg

Sicko return conveyor for returning workpieces to the operator after processing on (for example) multi-blade saws or planers. Compatible with the multi-blade saw (1328-400217). Technical data: Length: approx. 6,000 mm Width: approx. 2,900 mm Height: approx. 780 mm Workpiece length: max. approx. 4,000 mm Workpiece width: max. approx. 900 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

To push the arm set open at RASM Kindly Contact Sai Bavani [F10, Purchaser] 011-79573840

Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m -Crane chassis: Maximum beam width 135 mm Dimensions: see photo and technical drawing -Transport dimensions: 600/550/H420 mm -Weight: 49 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Claw coupling: elastic claw coupling -Hub bore: Ø 55/40 mm -Quantity: 1x coupling available -Dimensions: Ø 128 x 145 mm -Weight: 6.1 kg

Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Dimensions: see photos -Dimensions: 270/110/40 mm -Weight: 2.1 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Claw coupling: Coupling half with toothed ring -Hub bore: Ø 35 mm -Dimensions: Ø 79 x 52 mm -Weight: 0.9 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: Maedler, elastic jaw coupling -Hub bore: Ø 18/19 mm -Quantity: 1x coupling available -Dimensions: Ø 50 x 60 mm -Weight: 0.2 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, elastic jaw coupling -Type: GS24 CT9327 -Hub bore: Ø 20 mm -Quantity: 1x coupling available -Dimensions: Ø 55 x 77 mm -Weight: 0.4 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt-Body: made of stainless steel-1x conveyor belt speed: 16 m/min-1x conveyor belt speed: 8 m/min-Drive: 0.55 kW-Transport belt: with carrier-Belt width: 695 mm-Length: 4500 mm-Number: 2x conveyor belts available-Price: per piece-Transport dimensions: 4550/1000/H1630 mm-Weight: 450 kg

weight max.: 1000 kgworkpiece diameter: Ø 80 - 700 mmtable turning speeds: 80 - 1600 mm/min.roll diameter: Ø 250 x 50 mmvoltage: 230 V / 50 Hzrange L-W-H: 500 x 300 x 384 mm Antriebweight: 85.0 kgrange L-W-H: 500 x 160 x 384 mm MitläuferDescription: - Device for rotating and positioning containers and cylindrical workpieces- Unit constructed of solid steel with polyurethane-coated metal rollers- Stepless speed control with DC drive system- Rotary knob for continuously adjustable rotation speed - Switch for clockwise/counterclockwise rotation- Foot switch for start/stop,- High-frequency protectionScope of delivery:- 1x drive unit with integrated control system- 1x rotating unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1000 kgtable length: 1500 mmtable width: 1000 mmheight over floor: 200 mmstroke height: 200 - 1200 mmstroke: Zeit ca. 15 sektotal power requirement: 2.3 kWweight: 330 kg current new price approx. 5.000 euros special price on requestEquipment:- Robust electro-hydraulic scissor lift table- for ergonomic working at an optimum working height- with closed platform- stepless lifting and lowering- All-round safety rails- Placement: free-standing on the floor or as a pit installation- remote controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, swivel cylinder -Hydraulic cylinder: double-acting, stroke 300 mm -Piston rod: Ø 35 mm -Holes: Ø 25 mm / Spacing: retracted 540 mm -Dimensions: 590/85/H105 mm -Weight: 10 kg

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, central oil lubrication pump, oil single-line pump -Manufacturer: Vogel, Oil - Central lubrication pump, oil inlet pump -Type: unfortunately no exact designation -Item No.: 122 049 303 -Container capacity: 2.7 l -Dimensions: 235/140/H310 mm -Weight: 5.4 kg