52 ABUS used machine for sale

Wingspan: approx. 18,000 mm, max. load capacity: 3,200 kg, with electric trolley and radio remote control

Wingspan: approx. 18,000 mm, max. load capacity: 6,300 kg, with electric trolley and radio remote control

Offer 26059 Technical data: - E. Chain hoist ABUS GM 4 Bj.19, operation via floor remote switch - Load capacity 500 kg - 2 lifting speeds approx. 1.0 + 4.0 m/min - Projection 4000 mm - Hook height approx. 2750 mm - Lower edge of boom approx. 3150 mm - Total height approx. 3850 mm - Column dimensions approx. 250 x 250 mm - Footplate dimensions approx. 600 x 600 mm - Swivel radius 270 ° - Drive 400 V - Total weight approx. 400 kg

type ABUS VS - 1000/5,0 (406) Overall height 3.65 m Lower edge height 3.30 m Column diameter stlpa 406 mm Projection 5,000 [mm] Hook travel 2,900 [mm] Btto 941 [kg] Swivel 360 [°] Chain hoist ABUS GM 3, lifting speed 1/4 m/ min, cat motor. Powered Original crane book with inspections Last test 2025 new paint job Column RAL 7038 light grey Boom RAL 1007 - daffodil yellow current price - new 10.580 eur -without packaging, transport and VAT. - Pictures - original condition before overhaul

Electric chain hoist, 1000 kg, GM4 1000.4-2, Abus, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - is in very good condition and fully functional,- We have verified the function with a test. Electric chain hoist, 1000 kg, GM4 1000.4-2, Abus, used – top condition - Lifting height Chain length 3.25 m Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or al ...

ABUS-Einträger-Laufkatze Typ GM3100 / ABUS single-girder trolley type GM3100 Load capacity: 10 t Hakenweg / Lifting height: 10 m Reeving: 4 / 1 Lifting speed/lifting speeds: 0.66/4 m/min Zwei Fahrmotoren / Two travel motors Linear actuator and the contactor box damaged Einsatz auf Ein-Träger-Laufkran Typ ABUS ELK / Use on single-girder overhead traveling crane type ABUS ELK Price ex works, loaded Please do not hesitate to contact us for further information.

5t load capacity, track width 14,200 mm. Well preserved. Without warranty. Crane can be loaded on open truck freely.

New chain hoist with warranty Year 2013 Stroke 1/4 m/min complete with underlays, landing gear, etc.

ABUS ELKE - ELV 5t / 15m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : DEMAG IR-H 10 radio control Wingspan : 15000 mm Chassis (sides): 3220 mm, are removed Load capacity : 5000 kg Tare weights : approx. 3950 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

ABUS ELKE - ELV 5t / 11m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : IR-H 10 radio control Wingspan : 11000 mm Chassis (sides): 2330 mm, are mounted Load capacity : 5000 kg Tare weights : approx. 2710 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, well-preserved pillar jib crane Payload 1000 kg Projection about 6,360 mm Overall height approx. 3,350 mm Bottom bracket approx. 2,850 mm make of ABUS Workshop examination 2015 equipped with an electric chain hoist, floor operation on the boom moveable, and a new coat of paint Working speeds: Hoist around 1.0/4.0 m / min Trolley gear by hand rotation by hand The photos show a sample crane

1 factory-tested pillar crane Payload 1000 kg Reach 5,000 mm Height approx. 4,000 mm Bottom bracket 3,170 mm Make of ABUS Workshop examination 2015 Electric chain hoist, floor operation with a new coat of paint Working speeds: Hoist around 1.5 / 6.0 m / min Trolley gear by hand Slewing gear by hand

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist with powered chassis -Chain hoist: Abus type GM4- load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.3 m -Electric chassis: Abus EF14 -Carrier width: max. 340 mm -Dimensions: see photo technical drawing -Electrical accessories: connection cable see photos -Transport dimensions: 900/700/H340 mm -Weight: 63 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.1/0.75 kW -Speed: 12/53 rpm -Voltage: 380 V -Design: B3 -Shaft: Ø 39/50 mm/Ø 35/80 mm -Protection class: IP54/55 -Brake: 1.8 Nm -Quantity: 1 piece -Dimensions: 760/220/H265 mm -Weight: 51 kg

Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Manufacturer: Abus, 3 pieces cable trolley plastic with polyamide rollers -Type: flat cable -Shipping/Price: complete -Dimensions: 90/70/H75 mm -Weight: 0.1 kg/piece

Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 500 kg -Main stroke: 6 m/min -Fine stroke: 1.5 m/min -Chain length: 3 m -Chassis: Abus -Beam width: max. 260 mm -Dimensions: see photo and technical drawing -Transport dimensions: 520/400/H440 mm -Weight: 41 kg

Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Cable trolley: Cable trolley with polyamide rollers -Type: Round 10-16 mm -Number: 1 cable trolley available -Dimensions: 80/80/H93 mm -Weight: 0.1 kg

Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, head girder for double-girder bridge crane, double-girder traveling crane -Manufacturer: ABUS, 1 set of end plates for double girder overhead traveling crane -Type: ZLK -Drive motor: ABUS 0.12/0.55 kW -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist without hand control -Type: GM5 load capacity 1000 kg -Main stroke: 6.0 m/min -Fine stroke: 1.5 m/min -Chain length: 3.5 m -Transport dimensions: 570/390/H330 mm -Weight: 46 kg

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg

An ABUS lightweight portal hall crane is available. Load capacity: 1000kg, dimensions X/Y/Z: 1000mm/4000mm/3280mm. An on-site inspection is possible.

weight max.: 0,5 t stroke: 500 mm height of hook: 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Arm throath length 3000 mm - Lifting capacity 1000 kg - Speed 4 and 1 M/Min - Overall height 4000 mm - Column sleeve diameter 355 mm

- Crane model VS 355 - Loading capacity 500 Kg - Arm throath 4000 mm - Over All height 3400 mm - Column sleeve diameter 355 mm

arm length: 3600 mm total column height: ca 5500 mm weight max. in kg: 1000 kg travel of hook: 3000 mm height of hook: ca. 4000 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min - with trolley System is dismantled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Abus Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 500 kg

Abus Jib crane 2.5 meter / 250 kg

Abus Jib crane 3 meter / 250 kg