printing machines used for sale (4,850)

used Heidelberg Speedmaster 74 4-. Heidelberg Speedmaster 74 4-, Year 2013 530 x 740 mm (20x29"), only approx. 1 million impr. PressCenter EasyControl 15K Speed version Alcolor Autoplate Autom. ink roller-, blanket- and impression cylinder wash-up device Low-pile delivery Compressor Antistatic device Stream feeder Powder sprayer Etc. Available: at short term

used KBA RA106-6+LTTL FAPC ALV3. 2019 6 color 2 coating units 2 drying units Impressions: 170 million Max. sheet size. 740 x 1,060 mm Min. sheet size 340 x 480 mm Printing size max. 730 x 1,050 mm 18,000 sheets/h Additional "CX" package Active air cooling control cabinets UV/mixing operation coating unit Non-stop setup at feeder and delivery Delivery extension 38000mm (ALV) Machine elevation 450mm Drive tronic SPC Fully automatic plate changer: FAPC Advanced Lever 3 control system Combination cooling unit "beta.c" (Technotrans) Clean Tronic Drice Tronic SPC ErgoTronic Color Control ErgoTronic Lab QualiTronic Color Control ErgoTronic ACR Ergo Tronic ImageZoom LogoTronic Professional DataMatrix Select In production Available: 12/26 Located: Germany

used Tünkers S-1450. Laminator - paper overboard Make Tùnkers Model S-1450 Year 1997 Working width 1450 mm Substrate Feeder automatic suction feeder Laminate Feeder by hand Details with pressing roll Delivery Delivery on ...

used Heidelberg letterpress. Heidelberg letterpress With rollers for nummering Dutch height

used Heidelberg letterpress. Heidelberg letterpress With rollers for nummering Dutch height

used Heidelberg T. Heidelberg letterprees T For die-cutting and creasing no ink rollers

used Schneider Senator 106. Schneider Senator 106

used Polar 92 EMC. Monitor. Polar 92 EMC Monitor Year 1986 with 2 knives

used Heidelberg Cylinder S. Heidelberg Cylinder Press Model S Year 1955 54 x 72 Still on power in printing house Direct available

used Tränklein FEM joint burning. Tränklein FEM joint burning machine year: 1960 working width: 500 mm book thickness: 100 mm temperature regulation

used Theisen + Bonitz TB Sprint B315VP collator. Collator with finisher Manufacturer Theisen & Bonitz Model TB Sprint B315VP Year 1999 Condition Used Maximum size 350 x 500 mm Stations 15 automatic stations Pile height 30 cm Finisher TB Flex 303 QSM stitch+fold+trim with 2 Hohner stitching heads Jogger yes, zig-zag jogger

used Nagel Citoborma 480 AB. - 4 head drilling machine - with the existing accessories

used HEIDELBERG SM 52-4+L. - CP 2000 - Antistatic device at feeder and delivery - ALCOLOR dampening units - BALDWIN Balcontrol cooling device - HEIDELBERG Autoplate - Ink roller wash-up device - Blanket wash-up device - Impr. cyl. wash-up device - Coating unit - IR dryer - Grafix Alphatronic 200 - High pile delivery

used Nagel Multinak Stitching machine. Staple Stitching Machine

used Polar 92 EMC. - Program - Air table - Standard side table, right - Resopal side table with air , left - R2 Jogger - Spare kife

used Polar 115 EMC Monitor. Polar 115 EMC monitor in production ready condition, with extra reserve blades. Available immediately. Can ship worldwide.

used ABG Digicon 2. Maximum web width 330mm Minimum web width 180mm Maximum repeat length 24.5" 622.3mm , FBHF 12" 304.8mm Minimum repeat length 2" 50,8mm Top Rewind max diameter 600mm Bottom Rewind max diameter 700mm Web Guide Splice Table Corona Treater 2 FLEXO with UV Drying Screen Lamination Web Turn Bars Die-cutting with GAP MASTER Waste Rewind Tooling

used GALLUS EM 280. Web width: 280mm Unwind Web guide Corona treater 10 x print stations, 9 Flexo + 1 Screen 10 UV drying 10 water cooled rollers Lamination Adhesive side printing Duo label Web turn bar 1 hot foil unit 1 rotary station GAP MASTER Waste rewind Rewind Trolley for installing printing units Cylinders

used Hang 107-30. 4-head drill with foot switch

used Hang Piccolo III. Built in 1990 Eyelet machine Table model Eyelet diameter 4 mm Delivery date: immediately from stock

used ABG International ABG Vectra 410 mm 16 inch. ABG Vectra 410 mm 16 inches – Automatic Turret rewinder – Nice machine for long runs ABG Vectra STR 410 Autmatic Turret Rewinder Machine Details: Manufacturer: ABG International Product Line: Vectra Model: ABG Vectra STR 410 (Turret Rewinder) Web Width: 410 mm (16") Date of Manufacture: August 2008 Characteristics of he turret rewinder 410 mm web width Four-spindle turret rewinding system Automatic roll change capability Hot-melt tail sealing system Swing-arm mounted operator control panel Vectra-series machine frame and guarding 410 mm web width Automatic turret rewinding system Hot-melt tail sealing Manufactured: August 2008 Supplied by ABG International, United Kingdom The electrical cabinet documentation The machine manual

used Bobst Handypack Semi-automatic packaging aid for folding carton glue. Format range: Boxes, folded flat: max. 400 mm, min. 50 mm Length of the boxes: max. 500 mm, min. 100 mm Equipment: Standard, left-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, carton types: Ordinary folding boxes 4+6 dot boxes, with or without lids. Overhaul 2026: cleaned, checked, painted, new belts and belts. Machine can be viewed by appointment while running.

used Bobst Mistral 80 A2 CS Folder-gluer. Format range: max. 800 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, feeder with vibrator and tooth gauge, Accufeed, cutting alignment according to the feeder right and left, Pre-crusher right and left with lower central transport, electronic HHS upper gluer with 2 application heads, HHS quality assurance system with code reader, glue seam control and flipper ejector, disc bottom glue unit left, Digital positioning system for format setting with memory spaces (CS), digital position indicators, radio remote control, electronic control Bobst C.U.B.E, A2 folding floor module, video surveillance of the transfer station, upper and lower central transport in folding, kicker, counter, pneumatic, long press belt. Overhaul 2026: cleaned, checked, painted, new feeder and transport belts. Machine can be viewed by ...

used WOHLENBERG 137 CUTTING MACHINE. Format (cm): 137 Equipment / Additional information: Side tables, safety barrier, air table, 1xreserve knife Condition: Very good condition // The saddle motor works, but will need to be overhauled eventually.

used Jagenberg Diana 90-2 Folder-gluer. Reference ID PP-59295 Category Manufacturer - Model Diana 90-2 Year Built 1992 Machine Description The machine performs side gluing and bottom folding. It is equipped with an HHS system featuring three cold-glue guns. It produces boxes with a width of 90 cm and can handle small boxes with a folded section (the tuck-in flap) as narrow as 60 mm.

used Gallus R 160 B. -Year 2011 -Max working width 160 mms. -Unwind station, Rewinder station -Web guide -5 Letter press units -9 printing sizes Z 72-76-78-82-87-96-99-104-120 -Magnetic cylinders Z 78-82-96-99-104-120 -1 Flexo ( lack ) station -All UV lamps UVRay installed new few years ago -1 screen printing interchangeable unit -1 rotary die cut station -1 flat bed die cut station -Many dies available -Automatic Corona treatment Vetaphone Et 1 treater -In production, excellent conditions

used Heidelberg GTOV 52. -Four colours size 36x52 cms. Straight machine 4/0 -Year 1992, 34 mil. real impressions -Alcolor dampening system -Baldwin refrigeration and recirculation system -CPC 1.02 table control for automatic ink and plate registers -Numbering and perforating unit with cams,wheels and perforators -Quick clamps, plate punch -All parts and tools, Available immediately, any test is possible, in very good conditions

used POLAR 76 EM. refined air table, side tables, 2 knives

used IBERICA SPDK-105. IBERICA SPDK-105 • Reference ID: PP-59169 • Category: Flatbed Die Cutter • Manufacturer: Iberica • Model: SPDK-105 • Year: 2013 • Condition: Good • Location: Europe • Availability: Immediately • Speed: 7,500 sheets/hour • Maximum sheet size: 750 x 1050 mm • Minimum sheet size: 350 x 400 mm • Maximum cutting area: approx. 740 x 1050 mm • Cutting pressure: approx. 300 tons • Suitable for carton: approx. 90 – 2,000 g/m² • Suitable for corrugated board: up to approx. 4 mm • Non-stop feeder system • Non-stop delivery system • Automatic sheet feeding • Central lubrication system • Touch screen control panel • PLC-controlled operation system • Double sheet control • Front and side register system • Quick-lock die change system • Safety covers and light barriers • High-pile automatic feeder  ...

used HOHNER HSB 9000 SADDLE STITCHER. Output: up to 9,000 cycles/hour Format max. 365 x 350 mm / max. final format 320 x 365 mm Format min. 105 x 105 mm / min. final format 80 x 105 mm Operating data 15750 Switch-on time 9196 Operating hours 35557796 Stitches 35794795 Production counter 4571 Average production speed Consists of: 9 stations (8 + envelope feeder) Camera system 4 standard stapling heads + 2 ring-eyelet stapling heads likely without cross-folder (or possibly optional)

used HUDSON-SHARP WICKETER 175W-15. Category Bag Machines Manufacturer Hudson Model SHARP WICKETER 175W-15 Year Built 2009 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Maximum Draw Length (Bag width) 380 mm (15") Bag Depth (Includes lip) 152 mm – 711 mm (6" - 28") Nominal Machine Width 730 mm Maximum Cycle Speed 325 cpm Unwinding device – Core D 76 mm (3"), Motorized reel lifting, BST edge guide system, Bottom folding device Perforating devise – Pneumatic Dual Hole Punch Suction device for punching scrap – Electric Suction Unit

used Windmöller + Hölscher AD2360/16 Valve sack bottomer. machine overhauled, rotary feeder, one valve station, bottom capping strip with 2 color tail end printers, packeting station, Tube width: 30-70 cm, Tube length 48-140 cm, bottom width 7-16 cm

used Müller Martini Merit 3671. Three Knife Trimmer

used Morgana FSN Rotary numbering Numbering and perforating. MORGANA FSN ROTARY NUMBERING AND PERFORATING -Year 2001- Suction feed rotary machine -Speed max 9000 sph -Maximum sheet size 460mm x 460mm / 18" x 18" -Minimum sheet size 210mm x 125mm / 8.2" x 4.9" -Maximum paper weight 400 gsm -Minimum paper weight 50 gsm -Dimensions: L 1280mm x W 730mm x H 1115mm / L50.4" x W28.7" x 43.9" -Electrical Requirements: 240v 50hz -Product Weight 138 kg / 308 lb -Many perforators, two numbering heads available , manuals, tools and all accessories -In production, available immediately

used HEIDELBERG GTO 52 1. + Version Conventional dampening

used HEIDELBERG GTO PM 52 2. DDS II Dampening + Version Segment ink regulators Straight 48 mill. Impressions Quick action plate clamps Powder spray DBA

used Morgana Digifold Pro. MORGANA DIGIFOLD PRO -Year 2011, Totally refurbished and rebuilt with new monitor, new fold parts, new main board, etc. etc. -Touchscreen monitor 7” -Can be used in three different modes as required: - As a creasing machine - As a folding machine - As an integrated creasing and folding machine, performing both functions in a single pass -Many perforating wheels available -Suction feeder draws paper from below -Paper format: max. 900 x 358 mm /min. 210 x 140 mm -Paper weight: max. 400 gsm / min. 80 gsm -Number of creases per sheet: 9 -Max. number of folds per sheet: 2 -Number of program memory slots: over 1,000 -Min. distance between two creases: 40 mm -Min. distance between two folds: 70 mm -Fold length: 70 mm; Max. fold length up to 450 mm (automatic feed), up to 1,800 mm (manual feed) -Fine adjustment: 0.1 mm increments -Max. speed ( ...

used SAKURAI OLIVER 472 E II. 4 Colors Max speed 13,000 i.p.h. Control color console SCCII Semi-automatic plate change SPC Double diameter impression cylinders SAS, Blanket wash up devices Olivermatic Dampening system High pile delivery Free of damages Available immediately

used Nagel Multinak - S Staple Stitching Machine. Year of construction 1998 Staple Stitching Machine 2 staple heads electr. Drive electr. Footswitch Delivery date: immediately from stock

used HP INDIGO 7800 Digital Press. Counter: 71 Mil. clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm