ID3904 Used multi-level storage system with handling equipment / Gebrauchte Stockanlage mit Handling SR STICK SYSTEM MEGA 6000-B Year/Baujahr 1999 Designed as a high-performance machine for bush-hammering concrete blocks of varying heights (50–300 mm) with a working width of 1050 mm. This is a standalone continuous-feed system featuring a conveyor belt approximately 7.4 m in length (approx. 2.5 m at the infeed, 1.3 m for the support section, and 3.6 m at the outfeed). It includes a support structure for the hammer assembly, which features an oscillating lateral movement with an adjustable lateral stroke of up to 60 mm. The machine is equipped with one set of rotary hammers and includes a protective cover. Technical specifications: connected load approx. 10 kW at 400 V, 50 Hz; air consumption approx. 80 l/h at 8 bar. Feed speed: infinitely variable from 0.5 to 3 m/min. System weight ...

One semi new EVG ATT mesh welding line Flexible welding line for the production of standard and special reinforcement panels, from small batches up to large production runs Automatic feeding of longitudinal and transverse wires from coils via synchronised multi-track RA-XE-type rotor straightening lines with single or double wire feeding, equipped with up to 10 rotors Automatic feeding of the cross-wires from rolls via a multiple-needle system specific to the equipment Producción «just in time» de distintos tipos y geometrías de paneles High production speed combined with short changeover times No need to flip panels, as the cross-wires are fed and welded either above or below the longitudinal wires

TECHNICAL SPECIFICATIONS Manufacturer: AUMA Type: S 160.1 Type: Worm gearbox Drive speed: 940 rpm Output torque: 1,922 Nm Reduction (i): 30 Oil: PG460 / 4.5 Ltr. Side: Left and right ascending Weight: 170 kg SPECIFIC COMMENT - Matching pair of gearboxes

TECHNICAL SPECIFICATIONS Manufacturer: AUMA (GFC) Type: S 160.1 Type: Worm gearbox Drive speed: 940 rpm Output torque: 1,922 Nm Reduction (i): 30 Oil: PG460 / 4.5 Ltr. Side: Left and right ascending Weight: 170 kg SPECIFIC COMMENT - Matching pair of gearboxes

TECHNICAL SPECIFICATIONS Manufacturer: AUMA (GFC) Type: S 280.1 Type: Worm gearbox Wavelength:125 mm Shaft diameter: 65 mm Page: Left Ascending Oil: PG 460 / 18.5 Ltr. Weight: 525 kg

TECHNICAL SPECIFICATIONS Manufacturer: AUMA (GFC) Type: S 250.1 Type: Worm gearbox Reduction ratio (i): 7.75 Side: Ascending to the right Oil: PG460 / 14.0 Ltr. Shaft length: 135 mm Shaft diameter: 65 mm

TECHNICAL SPECIFICATIONS: Manufacturer: FLENDER Type: CFA 250 Series: BA 6610TU (worm gear) Drive speed: 870 rpm Output speed: 24.86 rpm Side: Ascending to the right Wavelength: 105 mm Shaft diameter: 65 mm

Technical specifications: Manufacturer: FLENDER Type: CDA 250 Series: BA 6610TU (worm gear) Drive speed: 917 rpm Output speed: 12.4 rpm Side: Ascending to the right Wavelength: 105 mm Shaft diameter: 65 mm

Vakuu lifting device for attachment to an overhead crane = - Manufacturer: Aerolift - For lifting and turning up to 90 degrees - Max. load capacity: 16 t - Equipped with 8 suction plates, each approx. 60 x 120 cm in size - With 3 vacuum pumps

Large basket welding machine, Fabr. ZÜBLIN Machine data of the automatic welding machine: - Inner reinforcement diameter range: 1,465 - 4,100 mm - Diameter of the longitudinal wires: 6-10 mm - Number of longitudinal wires: 12 or 24 - Length of cylindrical reinforcement: any mm - Weight of the entire system: approx. 26.0 t - Foundation dimensions: approx. 14.0 x 11.5 m - Basket in basket production possible, i.e. for large-diameter pipes that have to be manufactured with a double basket from a static point of view - This system can also be used to produce baskets with bells

Steam hardening plant, Fabr. Kraft Energy - Type Generator K15/1SHP = Power 450 Kw for heating formwork = with the heating system it is possible to occupy formwork 3 times a day! - 8 separately controllable hardening zones - Automatic temperature control - Versatile use, e.g. for truss and rod part shapes, segment production, wind turbine tower segments as well as pipe & tank manufacturing

Mixers, make Haarup, planetary mixers = - Make Haarup, type 2250/1500 (2,250 l mixer) - 75 kW, dead weight 6,600 kg - Condition very well maintained and maintained - Available from the end of August 2026

Concrete batching plant 100-120m3/h MIXING SET. FTS 4000 / 3000 horizontal double shaft mixer. (Sicoma, Italy) SET OF 4 HOPPERS AGGREGATE LIFT SYSTEM. Aggregate elevator belt to mixer. Length: 12,100 mm. Band width: 800 mm. Cement weighing scale with a load capacity of 1,500 kg. Construction in 3 mm thick steel sheet. Weighing system using 3 load cells. WEIGHING AND DOSING OF WATER. Weighing scale with a load capacity of 750 liters. Steel sheet construction. Weighing system using 3 load cells. POWER AND CONTROL PANEL. Watertight cabinet to be located in a dosing booth. Automatic operation. Equipped with SIEMENS electrical mechanisms. COMPUTER SYSTEM FOR AUTOMATION AND MANAGEMENT OF CONCRETE BATCHING PLANT DRY MIX/WET MIX. Dynamic control of production flows. Automatic activation of vibrators and fluidisers. Weight safety control in scales. Dynamic cycle corre ...

Double wall production, 2 folding pallets, Fabr. Swinging hammer, = for production, e.g. for double walls, production dimensions: 1 x 12.50 x 3.10 m - 1x 12.50 x 3.58, Steel decking flat and level - incl. vibrator - incl. control - incl. converter

Large-scale plant DW/ED Pallet circulation with GT and mat welding system completely assembled 3 years in operation approx. 10000 square meters produced Pallet size 12.5x3.4m 200 pieces Performance 7 pallets per hour 67 circulation stations, RBG HK, WG, BV, bucket conveyor, 3 compactor stations, 2 tipping stations, 8 QHW pairs, 1 end scarf robot, 1 magazine robot, 1 formwork robot.Formwork transport system with cleaner and lubricator ,RR/RB conveyor system ,pallet cleaner and lubricater,AfW system ,crane runways and workstation system . Optional storage cranes for outdoor areas.EBAWE/Progress control. GT Welding Machine Progress Mat welding machine Progress Competent and experienced assembly service for disassembly and assembly. Installation and recommissioning is possible worldwide. Attractive price-performance ratio If you are interested, just ask

Pallet circulation with GT and mat welding machine. For pallet size 12.5m x 3.4 m Extension for solid wall possible Not Assembled/Well Stored /Delivered 2019 Scope of Delivery RBG ,WG ,3xShaking Station ,BV ,KT ,Kübelbahn ,3xQHW Paar.Endschal Robot ,Magazine Robot ,Formwork Robot ,Formwork Transtort with Cleaner and Oiler ,Formwork Magazine ,Formwork System ,Pallet Cleaner and Oiler ,RR System,Control Siemens with SEW. SAA control company with host computer. Mat welding machine AWM Lattice girder welding system AWM Without crane runways, roller blocks and curing chamber. Can be manufactured and supplied at the customer's request. Assembly, material and cables are included for system assembly. Competent installation service, systems can be assembled worldwide. Performence 7 pallets per hour If you are interested, enquire, top price/performance ratio.

4500 Underlay boards - Production pallets, Fabr. ASSIX, Type Duro Board are given away at a special price, as the customer needs the space - Dimensions: 1400 x 1050 x 60 mm Beech wood panel glued on both sides with extremely impact-resistant and break-resistant polyrethane coating this creates a closed, seamless surface

Mobile Mixing Plant, Fabr. Blend E 050, with continuous mixer = for concrete with the option of producing cold asphalt = Scope of delivery consisting of: Blender - horizontal mixer 2100 mm length - Telescopic conveyor belt - Bitumen emulsion kit - Separate aggregate container with double belt - Continuous weighing system for 2 aggregates - Quick couplings for hydr. Attachments - Microfiber dosing system - Radio remote control Horizontal silo = - Length: 9,000 mm for loose cement, transportable on a truck or in a container

Paving stone finishing plant - shot blasting machine DISA type BT 125-188 - Beam hours 229 - Permissible document width 1250 mm - Permissible passage height 500 mm - Throughput speed 2-10 m/min - Wheel diameter 380 mm - incl. ventilation system

Mobile Mixing Plant, Fabr. IMER 1. Mixer: 1,200 litre capacity, 800 L net output for compacted concrete 2. Control: Original IMER control type HPS 2100-P 3. Year of manufacture 2021 - In-line feeder 4. Cement silos: 3 pieces each 60 tons or 42.9 m³ capacity 5. Cement augers: 3 pcs, with lengths of 6.0 m & 6.8 m 6. Aggregate bunker: 3 chambers with a total volume of 65 m³ 7. Kübelwagen: with a 1,000 litre bucket

Working range Mesh width (cross-wire length) max. 1,600 – 2,500 mm Distance between the outermost longitudinal wires max. 2,400 mm Number of longitudinal wires, depending on configuration max. 26 Longitudinal wire spacing: 150 mm Longitudinal wire diameter 4.0 – 8.5 mm Cross-wire spacing min. 50 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0 – 8.5 mm Working speed: max 150 cross wires/min Scope of supply: line wire spool pay off to mesh paket stacking system

Pallet circulation system for the production of Twin-Wall Panels and Filigree Floor Slabs comprising: 56 pallets; length = 10.00 m, width = 3.00 m Longitudinal and transverse transport systems for the pallets Stacker crane for storing and retrieving the pallets Curing chamber with 50 storage spaces 1 tilting station at the demoulding station Stacking areas with transfer trolleys Transfer trolleys for horizontal and vertical precast elements Automatic concrete distributor (built in 2018) Turning device for the production of double walls Beckhoff control system 2 laser plotters, from Z-Laser Steel processing PROGRESS: Straightening and cutting system, Progress MSR2/16 with positioning device for the steel of a complete pallet – plotter by Z-Laser Lattice girder cutting system for wall girders Spare parts for electrical/control systems, spare parts for mechanical c ...

Year of construction 2015 Operating hours: 7747 Straightening and cutting from wire coils Max. Production speed: 160m/min Wire diameter 8 - 20mm 6 wire diameters guided in parallel, Automatic and immediate selection of wire diameter Finished wire rod length: 500mm to 14000mm Rotor straightening system with hyperbolic straightening rollers (no damage to the wire surface) Fully automatic wire diameter change Shears for cutting to length 14-metre wire rod outlet and roller conveyor 6 driven reels, suitable for 5 tonne coils Beckhoff controller, network connection, online service

Progress M-System Mesh Welding Machine, Type EVOLUTION 2012 Complete mesh welding system for the production of customised reinforcement mesh from straightened wires. Main Components MMR straightening machine with 6 wire lines SWR welding machine with 6 welding heads Technical Data Maximum mesh size: Width: up to 3,500 mm Length: up to 9,000 mm Wire diameters: Longitudinal and cross wires: 6, 8, 10, 12 and 16 mm Mesh dimensions: Maximum width: 3,500 mm Maximum length: 9,000 mm Minimum width: 500 mm Minimum length: 1,000 mm Bar dimensions and accuracy: Maximum bar length: 9,000 mm Minimum bar length: 500 mm Bar length tolerance: ±5 mm Bar placing accuracy: ±10 mm Description The Progress M-System EVOLUTION 2012 is designed for the flexible production of customised reinforcement mesh in a wide range of grid patterns, dimensions and wire diameter ...

EQUIPMENT FOR GEOTECHNICAL AND ENVIRONMENTAL INVESTIGATIONS Original Gouda 20 ton static penetrometer for CPT tests, with mechanical tip and 50 operating rods mounted on Mercedes Benz Unimog Mod. U 404.0 Year 1972 Km 32.272, Mercedes-Benz 6 cyl. No. 130925 / 10 / 000070 DPSH heavy dynamic penetrometer for SCPT testing, hydraulic automatic release, vice with rod puller, 50 and 75 kg impact masses, with 15 rods Hydra Mini series portable hydraulic auger on wheels for surface environmental coring, with 250 kgm hydraulic gearbox and 1.00 m useful stroke

Pallet carousel system for filigree ceilings, Fabr. EBAWE = consisting of: - 52 pallets; L= 12.50, W.= 2.50 m - Longitudinal and longitudinal transport equipment - Stacker crane - Curing chamber - Stacking places - Exit car - Cleaning stations - Autom. Concrete spreader - Plotter - Steel processing

Pallet circulation system for double walls and filigree ceilings - 56 pallets; L=10.00 m - W= 3.00 m - Longitudinal and transverse transport equipment - Storage and retrieval machine for storage and retrieval - Curing chamber - 1 tipping station - Stacking places - Exit car - Concrete spreader - Turning device - Control Fabr. Beckhoff - Steel processing Filzmoser

One used complete mesh ( standard, special and engineered mesh ) for sale, exesting of: One used JAGER SCHLATTER Superflex mesh welding line: The Superflex system processes all materials used in the reinforcing mesh industry and offers maximum design freedom with the programmable mesh linear extension. The system is equipped with motorized, infinitely adjustable compact welding groups that automatically adapt to the geometry of the next mesh. This feature enables seamless transitions and quick adaptation to changing production requirements. Variable cross wire spacings can be precisely implemented, making the system ideal for the production of list and special mesh. This versatility gives companies a clear advantage in the reinforcing mesh market and enables economical production with a high degree of flexibility. One used Progress MSR2 straightening/cutting machine is a high- ...

TECHNICAL SPECIFICATIONS Manufacturer: ELBA Description: Radial Scraper Machine Type: Stationary Type: RSA 70D Year of Make: 1996 Boom length: 20 m Connected load: 65 kW Operating voltage 380V Weight: approx. 5,000 kg

Mischturm, Fabr. Liebherr, type Betomat 235 Aggregate silo size 290 m³ / chambers Cement silo: 3 silos (2x60 to + 1 divided with 2 x 30 tons) Forced Action Mixer: BHS Twin Shaft Trough Mixer = Type: DKX 1,67 / refurbished - 1 x Control: BENNINGHOVEN (latest version) Year of construction 89', the system was completely overhauled 5 years ago with control electrical conveyor belt - 1 x Kroll oil heater for winter operation The price of 65,000 euros is intended as a basis for negotiation, as the customer needs the space.