Up to 100 products can be produced on one table. • automatic or semi-automatic production lines; • EU-standard; • Warranty 24 months. The tables are made of sturdy steel construction covered with steel plate. The service life of vibrating tables is up to 30 years. Tables can be equipped with hydraulic tilt function, built-in heating pipes and vibrators. The sizes of the tables can be ordered for the required panel sizes. SUMAB equipment for the production of interior and exterior wall panels includes: • various types of circulating and tilting vibration tables • turnkey house-building plants; • the possibility of full or partial reconstruction of old enterprises and the installation of modern equipment; • profitability of production, reduction of economic and production costs; • the optimal solution to start panel construction of high-quality and modern hous ...

Mixer, make Haarup 750/1 Variant 728, fixed output 360 l, with elevator, control, cement/spirit level, control of the system via Mixodatamat

Cylinder mixing plant Zyklos, Fabr. Zyklos ZE 375/250 = Synchronous forced mixer, disc mixer in stationary design with elevator and cement scale. Dry filling up to 375 l, hardened concrete per batch 250 l, Mixer drive 7.5 kw, incl. daily double silo, capacity 3.5 cbm each, incl. 1 day silo, capacity 3.5 cbm, 1 FB 500 conveyor belt as collection belt and weighing with 3-part trough-shaped carrying stations

Underlay boards 'WASA Uniplast Ultra approx. 3360 pcs, dimensions 1400 x 950 x 50 mm, original price 150,00 € per board, higher stability and load-bearing capacity with low panel thickness and without profile. The reason for this is the use of glass fibers in homogeneous all-plastic.

Tilting table hydraulic, make Imbau = Formwork size 12 x 5 m Steel decking flat and level incl. complete vibrating technology Knauer incl. 4 hydraulic rams

Tilting table hydraulic, make Avermann Production area steel decking 8 x 3.50 m 5 Bosch vibrators - With hydraulic power unit and distribution box

Lattice girder processing = Separator, for cutting the lattice girders to length Various saw blades Lattice girder bearing for 9 fret lattice girders Lattice girder shelf for 4 beam heights hydraulically height-adjustable

Cutting and straightening system Progress, Ø 6 - 14 mm Outlet 8 m 5 reels Switchboard PC, Software Documentation

One used MSR 20 line is a straightening/bending machine which works off coil and thus optimize the flow of production. Low storage costs and easier material handling boost cost-effective production. Coupling the machines with a double-bending unit with automatic former changeover transforms the machinery into a multi-functional, high-performance coil-processing station for the production of rebar material and stirrups Specifications • Rebar processing off coil from Ø 8 – Ø 20 mm • 6 pay-off stations up to 3,2 t , motorized and brakes • Automatic wire diameter change system • 12m run-off with 2 movable bending heads • 2 bending heads with automated mandrl changeover • One Flying Shear • working speed up to 160m/min

1 used concrete bucket, make summer - Built in 2020, but unused - Content: 1.5 cbm volume concrete measure = - Dimensions L: 2.10 m - W: 1.40 m - H: 1.85 m Outlet: = with vibrator on the hose outlet nozzle

Italian made Mario Croci & Figli Concrete pipe machine. In great condition (the machine is new and it has never produced a single pipe). It is weather protected, placed in a dry warehouse. It produces 2 and 2.5m length pipes of D30 up to D120cm diameter. It comes with D300, D400, D500, D600 moulds along with rings. Located in Drama-Greece

TECHNICAL SPECIFICATIONS Manufacturer: OMG Galleti Designation: Planetary mixer with rotary gearbox Type: P-1500 TN Year of construction: 1994 Mixer volume: 2,250 l Fresh concrete output: 1,800 l Production capacity: 60 cbm/h Drive power: 2 x 30 kW Maximum feed size: 60 mm

TECHNICAL SPECIFICATIONS Manufacturer: STETTER (Germany) Designation: Concrete recycling plant Type: RA 20 Year of construction: 1994 Normal concrete washout capacity: 20 cbm/h Required rinsing water volume: max. 15 cbm/h grain size: 63 mm Separating cut: 0.20 mm Drive power washing drum: 2 x 4 kW Rinsing water pump washing drum: 2.36 kW SPECIFIC COMMENT - incl. washout pump - Operational and fully functional - Excl. agitators and dirty water pump

TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device  ...

TECHNICAL SPECIFICATIONS Manufacturer: MASA Description: Production plant for concrete products Year of Make: 1996 ESSENTIALLY CONSISTING OF: ------------ 01) Stationary horizontal compulsory mixer RECORD-HM 1500/2250 - Dry filling: 2,250 l - Output: 1,500 l ------------ 02) Dosing and weighing equipment for cement, water, aggregates - Cement silos - In-line feeder with weighing belt for 4 components ------------ 03) Stationary fully automatic block making machine RECORD 9001 V - Board size: 1,200 x 1,100 x 50 mm - Stone height: up to 400 mm - Mould height: 450 mm ------------ 04) Rope transport system, roller-supported, for dispatching and handling of production boards ------------ 05) Lifting and rotating basket with chassis - For removing the products from the underlay board to a steel table ------------ 06) Stacking and packaging system - Fully automatic, ...

Digital Printing Line for Concrete Slabs Manufacturer: Cismac / Sacmi Complete system (standalone) with input and task Usable working width: 1,200 mm about 5 years old, little used Digital printing line for concrete slabs Manufacturer: Cismac / Sacmi complete system (standalone) with input and output Usable working width: 1,200 mm About 5 years old, little used

Carousel system for filigree ceilings = composed of: 42 pallets 8500 x 2500 mm, 1 x NUSPL pallet cleaner 1 x Filzmoser RAX-XE 14/5 straightener 1 x TSH Filzmoser lattice girder cutter 1 x pallet oiler AVERMANN with extraction system, 1 vibrating table NUPL, 1 x crane with pallet crossbar, 1 x circulation control Avermann, 1 x lifting beam for ceilings

Stair formwork make Howal Variotop, type 18/120, Straight stair formwork sharp-edged overhead production Max. nominal width: 2.00 m Pitch range: 150-200 mm Tread range: 250-310 mm max. number of steps of 18 incl. hydraulic power unit Platforms on any step up to 1.50 m possible

Rubber buffers / silent blocs for concrete block machines Brands: SCHLOSSER, Hess, Masa, Omag, Rekers, Frima, Techmatic Web: contec-ek

ID3423 Macons MA15 8 t Mobil concrete plant with magnetic card control, Capacity 15 cbm/h, PAN mixer, mixer capacity 1000 liters, output 600 liters Mobile concrete plant with magnetic card control, capacity 15 cbm/h, PAN mixer, mixer capacity 1000 litres, output 600 litres