pillow packs machines used for sale (307)

Description Item # 9129 – FLOWPACK WRAPPER Manufactured by FUJI Model Alpha VI FW3400 Year 2008 3 x 200Volts, 50/60Hz, 30A Also with a MARKEM SmartDate 5 Coding Unit (missing cassette reel Holder, not included) 100/230Volts, 50/60Hz, 1-2A Stainless Steel Flowpack Wrapper 4metres Long Infeed, currently set with 150mm lug gaps on Infeed Chain Driven 2-up Knife Head, 200mms across photocell for printed films Splicing PRO-FACE Plc Controls Was running at around 200 packs per minute Can run up to a maximum of about 400 packs per minute, depending on product/size/feeding system

Description Item # 9216 - FLOWPACK WRAPPER Manufactured by REDPACK (UK) model P325 S year 2021 including MARKEM SmartDate X65 Printer speed up to 250 per minute 400volt, 3ph, 50hz, 5kva Sealing jaws width. Is 140mm 2-up knife Coder is 53mm Infeed is 200cm Total lengths is 460cm.

Description Item # 9227 - FLOWPACK WRAPPER Manufactured by TEVOPHARM Model Pack-6 Built by ENTREC (Belgium) in Year 2011 Their Model Number Enpack-6-L 3Phase, 400Volts, 50Hz 1-Up Knife Head, This machine was built for big chocolate tablets. 1 kg 241x112x38mm with capacity of 24ppm 2,5 kg 250x215x45mm with capacity of 16ppmm 5 kg 430x240x45mm with capacity of 8ppm The Enpack-6 flow wrapper is a mechanical driven machine. Servo driven 2-way spotcorrection on sealing table. 2nd set sealing rollers is heated. Static pre-heating block between 1st and 2nd set of sealing rollers. Water cooled top plates on sealing table. Cross seal unit with CTC 159 (space between the two shafts = 110mm) 1 upper- and 1 lower sealing jaw, L=298mm, W=25mm, transvers profile (in running direction of foil). Cut off length: max 499mm, min 100mm. Flight bar transver unit in cross seal unit. Max foil width = 650mm Inc ...

Description Item # 9374 - FLOWPACK WRAPPER Manufactured by ULMA Model FR200 Year 2018 Product flows left to right Infeed Conveyor with pushers, no product/no bag 230Volts, 50Hz, Single phase Electrical Drawings, Operating Manual Machine was previously packing small products with products in trays, with unprinted film This machine does currently have a damaged UPC Screen and is unable to be turned on - sold as is condition or can be run from a laptop

Description Item # 9379 - FLOWPACK WRAPPER Manufactured by DELFIN PACKAGING (Italy) Model Carina 450 Year 2007 400Volts, 50Hz, 3Phase Previously used to pack chocolate bars, can also do waffles, cookies, etc. PEC for printed films Also with Coding Unit up to 60 packs per minute Maximum bag length of 350mms

Description Item # 9375 - FLOWPACK WRAPPER Manufactured by PFM Model Swift Year 2001 380Volts, 50Hz, 2.1kW Can run up to 70 packs per minute Variable speed control Adjustable Forming Box Handwheel adjustment cut off length and crimper dwell Suitable for max sizes 40 to 350mms long x 5 to 220mms wide x 1 to 100mms high

Description Item # 8869 - FLOWPACK WRAPPER Manufactured by FUJI Model FW3710 Stainless steel Vertical cutting knife motion Photo cell Multi-belt drive infeed with sensors Brush action wrapping station Has been used for packing pizzas With ZETATRADE printer

Description Item # 9070 - FLOWPACK WRAPPERManufactured by FUJIModel FW3710/BSWith SplicerMachine in stainless steel1-Up Rotary Cutting Knife MotionInfeed Belt with 3 x SensorsBrush Action Wrapping StationLast being used to pack chocolate trays measuring 206mms long x 61mms wide x 54mms highMaximum pack size is 340 x 200 x 100mms high.FUJI infeed is about 1250mms longNominal maximum capacity 150 packs per minute

PFM S.P.A. FALCON HORIZONTAL FLOW WRAPER WITH TRAY DENESTER

Fromm brand air cushion packaging and protection machine, Possibility to make several sizes of air cushions., Working capacity: 25-49 cycles/min depending on cushion size and film type used., Rolling machine., Elec:: 230 V / 50 Hz / 2 kVA / 16 A , Film width (mm):: 420 , Roller diameter (mm):: max 280 , Film length (mm):: 500 to 1000 depending on film type , Roller chuck diameter (mm):: 76 , Thickness (mm):: 0.042 à 0.08 , Pressure:: 4-8 bar

Autobag AB 180 OneStep – fully automatic bag packaging machine with thermal transfer printer Year of construction 2007 | Location: 41564 Kaarst-Holzbüttgen Commercial sale. Delivery and pick-up possible by arrangement. For sale is a used Autobag AB 180 OneStep (Automated Packaging Systems) – a proven, robust and flexible pouch packaging machine with an integrated thermal transfer printer. Equipment: • STANDARD SEAL FLATTENER • STATIC BACK SHELF (NO SUPPORT) • AB180 ONESTEP 203 dpi PRINT KIT (Thermal Transfer Printer PI-412c) • FUNNEL SIZE A12 • BD100 (Orange Loop / Bag Deaerator) Also included: 1 box of 13 rolls of film (Autobag chain bag) How it works (manufacturer's description): The AB 180 OneStep feeds an autobag chain bag coming from the roll through the printer, opens it by means of air pressure and makes it ready for filling. The pr ...

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

A complete line from weigher to shipping case, offered as one set, This automatic line weighs products, packs them in bags and places the bags in shipping cases, in one continuous process. On top sits a Yamato Dataweigh multihead weigher in stainless steel, which doses the product accurately into a GEA CFS SmartPacker SX400. This vertical form-fill-seal machine has the Quattro Seal version, for four-side sealed bags that stand up well. The SmartPacker has automatic film unwinding, integrated sealing units and a touchscreen with recipe management., After packing, a BluePrint Automation HVP system from 2003 takes care of product handling and transport, after which a Rembrandt Packaging / Lantech case packer from 2005 places the bags in cases automatically. The associated conveyor systems are included. The line suits a range of dry and free-flowing products, depending on configuration, and  ...

Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system without LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit and transparent protective enclosure. Inspection possible by arrangement.

The Thimonnier M3200 is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag volume: 70 - 1. ...

Compact VFFS machine that forms, fills and seals bags, This Audion turns a reel of film into pillow bags: the film is formed around the filling tube, sealed along the seam and closed at the bottom, after which the product drops into the bag from above. Suitable for dry, free-flowing products such as pasta, snacks or cut vegetables, fed by a weigher or doser., It is built compactly on a stainless frame with castors and has a touchscreen with adjustable seal temperatures. We did not find a rating plate with the model or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/audion-vertical-form-fill-seal-machine/ , Type: Vertical form fill seal machine (VFFS), Bag style: Pillow bag, Film transport: Two pull belts along the filling tube, Controls: Touchscreen, adjustable seal temperatures, C ...

Vertical packaging machine (VFFS) with servo drives and Videojet printer, This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film., The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own tempe ...

VDL UVA Lima 250 High speed VFFS Serial: 2016542 2016, Stainless, high speed continuous motion vertical form seal bagging machine, jaw width 320mm, up to 200 bags per minute, Allen Bradley HMI touch panel, with Becker vac pump and Markem Smartdate X40, comes with four different sets of forming shoulders a trolley of additional parts and a flighted elevator outfeed conveyor, 3Ph

Fully automatic side sealing machine UNIVERSA 400 NT Used machine; Year of manufacture 2001 How does it work and stands Description: Fully automatic flow wrapping machine for packaging products – independent length – with full wrapping and without foil overlap. Maximum performance is approx. 40 cycles/min. The product is fed via a conveyor belt at the same time. wrapped in a semi-tubular film over a forming shoulder. The product indexing is done via a horizontally scanning light barrier. The feed belt is set to different product widths can be easily adjusted. After wrapping the product with The foil is cross-welded with a permanently heated welding system. The longitudinal welding is generated by a continuous side welding device. The altitude of the forming shoulder and welding equipment is manually adjustable. The remaining foil strip is picked up on a foil win ...

Technical data: Welding punch: 450mm permanently heated Punch passage height: max. 150mm Punch Transition: Length Compensation Longitudinal welding: permanently heated welding wedge Foil: Half tube approx. 12-80μm max diameter 400mm Max. film roll width: max. 600mm Conveyor belt: inlet and outlet 400mm wide Product output: up to 85 cycles/min Transport speed: 10-30m/min Working height adjustable: 780-930mm Overall length: 1950mm Overall width: 1650mm Overall height: 1850mm Control Panel: Sytron Colour: Kallfass anthracite Rated Power/ Rated Current: 3.5KVA / 5.1A Power connection: 400Volt DS/ 50Hz with protective conductor

1 piece Kallfass feed conveyor (laying conveyor) Year of construction: 2016, delivered 2017 1 piece Kallfass Universa 500 Servo Year of manufacture: 2016, delivered 2017 1 piece Kallfass Shrink Tunnel Compact 650 DD built in 2017, (2 heating bowls at the top and 2 heating bowls at the bottom) 1 piece of removal belt

BVM full wrapping machine COMPACTA 6010 Fully automatic. Strip feeding with light barrier control Used machine built in 1998; in operational condition with support band (support band) Technical data: Cross welding: 620 mm Belt width: 560 mm Passage height: 150 mm Longitudinal welding: continuously working Film width: max: 800x800 mm Half-tubular film Electrical connection: 400 VDS, 50 Hz with earth and zero Connected load: approx. 3 kW Paintwork: RAL 5007 - brilliant blue Standard working height: 850 +/- 50 mm Description: -Machine frame made of aluminium profiles screwed together -Feeding via conveyor belt in line -Infeed and outfeed conveyor belt, speed infinitely variable aboutFrequency converter -Triggering of the work cycle and control of the product via light barrier, optionally horizontal or vertical -Longitudinal welding continuously o ...

Gainsborough GV2K108 VFFS bagger with auger filler Serial: GV101450 2010, Vertical form fill seal bagging machine with top mounted Augapac vectofill S4 auger filler, smart date X40 coder, HMI touch screen controls, up to 70 bags per minute, 250mm jaw width, comes with box of spare jaws, screws, belts, forming shoulders, also comes with Volkmann VS2000 vacuum conveyor which was previously used to vacuum powder into the hopper, with manual, 3Ph

Connection: 380V/50Hz, current consumption: 7.1A, power: 2.1kW, weight: approx. 400kg. The machine was removed from production in working condition approx. three years ago and subsequently placed in storage. CE marking available. An on-site inspection is possible.

HDG duplex HFFS RB-200-2 Bj 2022 For two small stand-up pouches with reclosure (zipper) per cycle. Conversion to one large pouch possible. Current format: width x height x bottom gusset 90mm x 150/170mm x 2x25mm Output: up to 180 bags per minute (realistically 150-160). Barely run; like new. Without dosage. Location: near Frankfurt

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width transverse: 2mm Seam width longitudinal: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erection and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard derz. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap sealing station Acceptance of the folding cartons and transport to the filling station, fixation under the filling stat ...

Ulma VTI 640 Technical Specifications Model: VTI 640 Condition: Mint (fully functional) Year of Make: 2025 Capacity: Up to 20 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for laminated film ✅ Machine prepared for MAP ✅ Format tube for bag width 300mm ❌ Label dispenser ✅Videojet 6330 Printer ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Automatic foil centering ✅ Quick-change system for film with vacuum gluing table and knife ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt increasing ✅ Volume pneumatic filler with tank 200 – 300 litres Documentation & Operation Language (documentation & HMI): German (other languages on request)  ...

SALE ONLY WITHIN GERMANY AND AUSTRIA The ULMA FM 300 automatic flow wrapper has been specially developed to package fresh products with multi-layer films in a modified atmosphere (MAP). This machine produces hermetically sealed pillow-pack tubular bags in pillow format. Ulma FM 30 The ULMA FM 300 automatic flow wrapper has been specially developed to package fresh products with multi-layer films in a modified atmosphere (MAP). This machine produces hermetically sealed pillow-pack tubular bags in pillow format. Technical Specifications Model: FM 300 Condition: Refurbished 2026 (fully functional) Year of Make: 2020 Capacity: Up to 80 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Flowpack Machine equipment Length of infeed belt: Free insertion distance 2135 mm Features ✅ Wash Down Feed Belt in Hygiene Design ✅ Motorized fi ...

Ulma VTC 840 Technical Specifications Model: VTC 840 Condition: Exhibition machine (fully functional) Year of Make: 2025 Capacity: Up to 90 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for mono PE film ✅ Motorized film roll holder (max. film width 830mm) ✅ Headspace Vacuum Version (Tigth Bag) ✅ Format tube for bag width 240 & 310mm ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 830mm) ✅ Cross sealing beam with Easy Teflon Change ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt Documentation & Operation Language (documentation  ...

Ulma FM 300 C X (WASH DOWN VERSION) The ULMA FM 300 C X was developed to package fresh food with barrier film (BDF) in a modified atmosphere (MAP). This machine produces hermetically sealed "pillow packs" that are then shrunk in the hot air tunnel. Technical Specifications Model: FM 300 C X Condition: New Year of Make: 2025 Capacity: Up to 70 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Barrier Shrink Tubular Bag Machine equipment Length of infeed belt: Free insertion distance 2490 mm Features ✅ Machine in wash down version ✅ Motorized film roll holder (max. film width 900mm) ✅ Foil Limit Switches ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Machine suitable for barrier shrink film and laminated film ✅ Cross-sealing bar with double tooth for mono films ✅ Independent ej ...