34 WOLF used machine for sale

Key data: 150 KW, 400 V

Wolf Gas CHP GTK 140E01 Gas electricity and heat generators from 2022, 0 operating hours (never run), with control and silencer. 140 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: Marelli MXB-E 250 MB/4, 250 KVA Manufacturer: Wolf Model No.: GTK 140E01 Type: Natural Gas CHP Serial Number: 3260 Power [KWel]: 140 Power [KWth]: 216 Power [KWgas]: 384 Engine: MAN E2876 E312 Motor power [KW]: 150 Year of Make: 2021 Hours: 0 hours (never run) Weight unit [kg]: 3,500 Dimensions LxWxH [m]: 3.30 x 1.30 x 2.20 AC Generator MarelliMotori MXB-E 250 MB Manufacturer: MarelliMotori Model: MXB-E 250MB Type: AC Synchronous Generator Serial Number: 1033344 Power [KVA]: 250 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 361 Speed [1/min]: 1,500 Year of Make: 2021 Weight [kg]: 680

Used hot air generator with oil burner Ready for operation at the site

Make : Wolf Built in : 1988 Dimensions : 4.1 m x 7.1 m x 3.0 m (approx. WxLxH) Supply air cover : Filter ceiling Lamps : 2 x 4 pcs. Recessed luminaires of 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 2 x 0.65 m x 2.0 m (approx. WxH) left+right Roller door : 6.0 x 2.3 m (approx. WxH), laterally between paint booth and dryer Rusting : Whole surface grating 12 pcs 1420x640 mm, 12 pcs 1300x525 mm, support rod 640x40x3 mm, 525x40x3 mm Additional equipment : pneumatic lift, JAB, 2,5 t, 11 bar, Remark : Panels in the lower area rusty Heating unit : 300 kW, gas burner Drying temperature: 80 degrees C Supply air unit: 22,000 m3/h; 7.5 kW Exhaust air unit: 21,000 m3/h; 5.5 kW Piping : supply and exhaust pipes, deflector hood, etc. Electrical : Control cabinet

Paint booth: The paint booth is a special system Make : Wolf Year of construction : Cabin 2011 Dimensions : 4.5 m x 4.8 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 2 recessed luminaires with 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Base system with full surface rusting Heating : approx. 200 kW electrically heated, but can be replaced by an oil or gas powered unit Dry temperature: 80 degrees C Supply air unit : 18,500 m3/h; 7.5 kW Exhaust air unit: 18,500 m3/h; 7.5 kW Pipelines : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Hanover Area Retail price : € 17.500,-, net ex site without dismantling

Paint booth: Make : Wolf Year of manuf.: Cabin 2011, Aggregate 1993 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pcs recessed luminaires with 3 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x50x3 mm Heating unit : 267 kW Oil burners : ELCO brand, alternatively gas burners Dry temperature: 80 degrees C Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 22,800 m3/h; 7.5 kW, 960 1/min Exhaust air unit : 22,500 m3/h; 7.5 kW, 960 1/min Pipelines : Supply and exhaust air pipes, deflector hood, air intake curve Electrics : Control cabinet The paint booth was originally a Wolf drying booth, but wi ...

Paint booth Wolf-Taifuno: Make : Wolf, Type 4/B, Taifuno Year of manuf.: Cabin 2011, Aggregate 2009 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pc recessed luminaires with 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x40x3 mm Heating unit : 209 kW Energy saving : Speed control with frequency converter and heat recovery Dry temperature : 80 degrees C Oil burners : Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Pipelines : Supply and exhaust air pipes, deflecto ...

Unit set for paint booth with speed control and heat recovery: Make : Wolf, Type 4/B-M Year of construction 2009 Dimensions : 1.5 m x 4.2 m x 3.0 m (approx. WxLxH) Heating unit : 209 kW Burners : oil burners, Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1,500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Energy saving : Speed control with frequency converter and heat recovery Pipelines : Supply and exhaust air pipes, deflector hood, air intake hood Electrics : Control cabinet Location : Nuremberg Area Retail price : € 11.900,-, net, ex location

Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location

Painting facility Königsmoos: Make : Wolf Built: 1989 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply air ceiling : Filter ceiling Lamps: 2 x 4 pcs. recessed luminaires with 4 x 58 W each Entrance side: 2-wing gate 2.35 m x 2.85 m (approx. WxH), glazed Escape door: 2 pieces, 0.6 m x 2.0 m (approx. WxH) Rusting : the existing rusting remains on site - we can offer alternatives Heating unit: 209 kW, oil burner Energy saving: Speed control with frequency inverter Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust air unit: 22,000 m3/h; 7.5 kW Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Ingolstadt Area

E - engine of Exhaustor 3 x 380 volts.

Make : Wolf Built: 1988 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.0 m (approx. WxH) Roller door: 6.0 x 2.3 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting, support rod 1200x40x3 mm Lifting platform : was defective, was scrapped Heating unit: 209 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust unit: 22,000 m3/h; 7.5 kW Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Nuremberg area Sales price: € 11,990,- net from location incl. dismantling We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, light ...

Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Suction register: Make : Wolf Built: 2004 Dimensions: 3500 x 1500 x 650 mm and 2500 x 1500 x 650 mm (approx. LxHxD) only 4 pieces left in stock In addition, we offer: Exhaust air unit with exhaust air pipe and deflector hood depending on size. Rectangular sewer pipes 1200 x 600 mm, unit price € 50,- net from location. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Painting booth: Make : Wolf Taifuno Dimensions: 4.0 m x 8.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH) Roller door: 6.0 x 2.2 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x15 pcs. 790x495 mm, support rod 790x50x3 mm Heating unit: 209 kW, gas burner Dry temperature: 80 degrees C Supply air unit: 24,800 m3/h; 11 kW; 1000 rpm, V-belt Exhaust unit: 24,300 m3/h; 11 kW; 1000 rpm, V-belt Energy saving: speed control with frequency inverter and heat recovery Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin, double dryer: Dimensions: 5.1 m x 7.0 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. r ...

Make : Wolf Built: 1995 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 7 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH), 2 pieces right and left Roller door: 6.0 x 2.5 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x13 pcs. 790x495 mm Transverse travel unit: 8 pcs trolleys Heating unit: 267 kW Burner : Gas burner Dry temperature: 80 degrees C Supply air unit: 22,800 m3/h; 7.5 kW; 960 rpm, V-belt Exhaust unit: 22,500 m3/h; 7.5 kW; 960 rpm, V-belt Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin: Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. recessed lamp with 4 x 58 W each Entrance side: 2-le ...

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Description Item # 9270 – Coating/Powdering Drum This machine is designed for coating products with sprinkling materials such as desiccated coconut, vermicelli, nonpareille, granulated sugar, powdered sugar, cocoa powder, flavorings, nut or almond pieces. Manufactured by WOLF Model WPD-400 Year 2024 Working width: approx. 400 mm Drum diameter: 400 mm / Drum length: 870 mm Power consumption: 0.3 kW Rotation speed: 7–9 rpm Conveyor speed: 2.5 m/min Overall dimensions (L×W×H): 1555 × 1015 × 530 mm Compressed air consumption: 10 l/min Electricity: 220 V, 50 Hz

Description Item # 9363 - CLUSTER FORMER / CEREAL BAR FORMER Compact system for shaping cereal mixes in any shape. The moulding system designed for processing and moulding cereal masses Not only rectangular products can be formed, but e.g. domes, triangles, bars etc. Manufactured by WOLF Spezialmaschinen Model: WCF 200 200mm working width Working capacity depends on the weight of the product. It can be 50 kg per hour. Year of manufacture 10/2023 3 formers. 1 is with 5 buttons, 1 is with 6 buttons in a row, 1 is for bars 2 in a row. 400V/230 V/ 50 HZ

Wolf vertical bagging machine, With 2021 Herma labeler and a markem Printer

rotary table dia.: . mm max. dia. of grinding wheel: 300 mm with manual ongoing: . 0 manually feed: . 0 1,5 KW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

air flow quantity: . m³/h suction power: . kPa power capacity: . kW Extraction system The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The ventilation system was used to extract kitchen exhaust air. The system is weatherproof and can therefore also be installed outdoors., Additional title: Fan for air exchange, Flow capacity: 20000 m³/h, External compression: 600 Pa Total compression: 734 Pa, Fan revolution: 1160 1/min, Noise level next to the unit: 58 dB(A) in 1 m distance, Power: 5,82 kW (inkl. Frequency converter), Motor 7,5 kW, Current: Motor-electric power 16,01 A, Voltage: Motor-Voltage 3 x 400 V, Frequency: 53 Hz, Length: approx. 4070 mm, Width: approx. 1630 mm, Height: approx. 1810 mm, Weight: 1200 kg, Operation / Control: controlled via wall mounted cabinet with integrated controllers, Material: Stainless steel cabinet, Features: Fan (free spinning wheel), Frequency controller, electrical cabinet, bird protection (780 x 780)

A Wolf checkweigher with an integrated weighing unit Wipotech IW 40K is available. Infeed conveyor length: 600mm, weighing conveyor length: 700mm, outfeed conveyor length: 600mm, belt width: 400mm, direction of travel: right-left, max. product weight: 17kg, graduation: 1g, max. weighing weight: 15kg, throughput: approx. 200 products/min. Machine dimensions X/Y/Z: approx. 1300mm/500mm/1300mm, weight: approx. 200kg. Documentation vorhanden. An on-site inspection is possible.

Electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LG4186-4AA60-Z 180L -Power: 22 kW -Speed: 1465 rpm -Protection class: IP55 -Shaft: Ø 48 x 110 mm -Design: B3 -Dimensions: 670/340/H440 mm -Weight: 152 kg