Your found location: Latitude 0.0 + Longitude 0.0

 

Manufacturer:
(Category: 204)

ABA 1
BGU 1
BMT 6
CB 1
DMC 7
ELB 1
FMB 2
HBM 2
KED 2
LGB 1
LMU 1
MB 1
NA 1
Ott 5
SAC 1
SBF 1
SCM 9
TOS 1
UWM 2
VG 2
Viet 15
grinding machines
date: 28.03.2024 add to watchlist
Machine: OTT RSK-0 Wide belt grinding machines
item-No.: 163673266
New in: 1980
used

Grinding width 1100mm Passage height min./max. min. 3mm / max. 150mm Aggregates 1-Belt Combi Unit Roller / Shoe Feed rate 4+8m/min Total connected load 17 kW Abrasive belt W x L 1120x1900mm Extraction connection Ă 200mm / 140mm Weight 2000kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well as to inspect Terms of payment: Prices plus VAT. VAT, payment before pick-up or shipment Terms of delivery: ex location

grinding machines /Edge sanding machines
date: 27.03.2024 add to watchlist
Machine: WILD+LĂĽCKE NFSB1 Edge sanding machines
item-No.: 163547558
used
Price: 1.390 €

Gebr. Edge sanding machine Wild + Gap NFSB1 Motor power: 2.6 / 3.2 kW (2 speeds) Table size: 30 x 100 cm Table adjustment height + depth by handwheel Swivel grinding unit Veneer grinding device Support table for radius grinding (diameter roller: 100 mm) Sanding belt height: up to 200 mm Suction connection: 140 mm Feed console incl. various sandpaper Dimensions: L: 180 cm W: 95 cm H: 120 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

grinding machines /Wide belt grinding machines
date: 27.03.2024 add to watchlist
Machine: VIET S2-T233 Wide belt grinding machines
item-No.: 159236591
New in: 2005
used

Inv. Num. : 6016 Type: S2-T233 Producer: VIET Created: 2005 Parameters: Operating hours: 1600 h Switching-on hours: 600 h Sanding belt length: 5090 mm Sanding belt width: 150 mm Vacuum bandwidth: 1350 mm Grinding roller: 190 mm 2 longitudinal grinding belts at the top 3 engines Cross loop unit

grinding machines /Wide belt grinding machines
date: 27.03.2024 add to watchlist
Machine: HEESEMANN LSM 6 Wide belt grinding machines
item-No.: 160308036
used
Price: 12.950 €

- very good condition - year of manufacture 1993 - Heesemann electronic PLC control - model / type LSM 6 TECHNICAL PARAMETERS: working width of grinding 1350 mm thickness max. ground elements 150 mm MACHINE CONFIGURATION: I- cross-cross aggregate with sequential electronic pressure main engine 13 KW pneumatic oscillation of the photocell extraction output 1 x 180 mm grinding belt size 5480 x 150 mm II- combo unit with boot main engine 13 KW grinding belt cleaning system with oscillation shoe with pneumatic clamp pneumatic oscillation of the photocell extraction output fi.1 x 180 mm grinding belt size 2620 x 1350 mm PNEUMATIC OSCILLATION OF THE PHOTOCELL pneumatic strip system with oscillation cleaning tapes III- combo unit with boot main engine 13 KW grinding belt cleaning system shoe with pneumatic clamp output to the extractor fi. 1 ...

grinding machines /Wide belt grinding machines
date: 27.03.2024 add to watchlist
Machine: HOUFEK SPB 1100 BULDOG 5 Wide belt grinding machines
item-No.: 162613637
New in: 2019
used
Price: 14.265 €

HOUFEK SPB 1100 BULDOG 5 wide belt sander built in 2019 in the Czech Republic is used in small or medium-sized factories to sand among others solid wood, veneered surfaces and MDF panels. The reliable machine with its modular design and compact size machines workpieces placed in the workspace with a maximum width of 1100 mm using a fast and reliable sanding belt, guaranteeing excellent results. The HOUFEK BULDOG 5 SPB 1100 wide belt sanding machine for wood weighs 1390 kg. Technical data of the wide belt sander HOUFEK SPB 1100 BULDOG 5 - machined materials: wood, wood-based composites, MDF panels, veneered surfaces, lacquered surfaces - working width: 1100 mm - sanding belt size (L x W): 1900 x 1120 mm - infeed belt size (L x W): 2400 x 1120 mm - sanding belt speed: 18 m/s - maximum infeed belt working speed: 9 m/min - minimum infeed belt working speed: 4.5 m/min - infeed belt ...

grinding machines /Edge sanding machines
date: 26.03.2024 add to watchlist
Machine: DE STEFANI MVT 1000 Edge sanding machines
item-No.: 163657388
used

Code: 0772 Brand: DE STEFANI Model: MVT 1000 Edge sander with 1 group for flat and shaped edges, solid wood edges, Mdf, veneered, melamine paper covered, varnished, for furniture, doors, panels, etc. Technical data: Tilting sanding group suitable to sand rough or finished mouldings with pad for flat and shaped surfaces 2 speed motor rpm 660/1450 Max working height mm 100 - Adjustment by handwheel Feed track speed variator from 6 to 20 mt/min Extractable roller conveyor for panel support Abrasive belt cleaning blower N° 1 suction mouth diameter mm 120 N° 1 suction mouth diameter mm 100 Compressed air 6-7 atm Overall dimensions mm 2100 x 1300 x 1400 h Weight kg 1100

grinding machines /Edge sanding machines
date: 26.03.2024 add to watchlist
Machine: TAGLIABUE MCB Edge sanding machines
item-No.: 162443954
used

SPECIFICATIONS: 2 oscillating grinding units at the top - bottom Inclination 0° - 45° Adjustment option Lateral support for wide workpieces 80 mm guideway Max. working height mm: 100 Upper pushers with adjustable rubberized wheels

grinding machines /Brushing grinding machines
date: 26.03.2024 add to watchlist
Machine: ITALMECCANICA MAK2 Brushing grinding machines
item-No.: 159783939
New in: 2010
used

SPECIFICATIONS: 2 brushing units Width transport carpet mm: 400 Workpiece height mm: 10 - 120 Feed speed m/min: 8-12 Installed capacity KW: 2.0

grinding machines /Brushing grinding machines
date: 25.03.2024 add to watchlist
Machine: UNISANDING 2B/1300 Brushing grinding machines
item-No.: 160331585
New in: 2000
used

Fabr. UniSanding built year 2000 with 2 x motors 2.3 Kw with 2 brushes Arb. Width -1300 mm Arb. Height 130 mm Constante table with Vackum

grinding machines /Wide belt grinding machines
date: 25.03.2024 add to watchlist
Machine: VIET VALERIA ICCC INF 1100 Wide belt grinding machines
item-No.: 161342293
New in: 2000
used

1 machine (from below) 3 Roll grinding machine Fabr. Viet Model. VALERIA ICCC INF 1100 Year of construction: 2000 Roller 1. 21.3 kW Roller 2. 11 kW Roller 3. 11 kW Feed rate 3.7-20.3 with vacuum table 2 machine (from above) 3 rollers wide belt grinding machine Fabr. Viet Model. Challenge 331 TM Year of construction: 2000 1 roller 18.5 kW 2 roller 11kW 3 roller 11kW Working. 1100mm Feed speed.3.7 - 20.5m/min Engine. 1.5 kW with vacuum table

grinding machines /Brushing grinding machines
date: 25.03.2024 add to watchlist
Machine: ERMA GD 243 Brushing grinding machines
item-No.: 159816133
used

Brushes + grinding machine Erma Fabr. Erma Type. DG 243 Engine. 1.5 kW Turn. 1430 rpm

grinding machines /Grinding machines
date: 25.03.2024 add to watchlist
Machine: LöWER ESM 300 Grinding machines
item-No.: 162940777
used

Grinding machine Löwer ESM 300 Built in 1987 Grinding width 290 mm Sanding belt width 300 mm Oscillating abrasive belt Usable height 120 mm Abrasive belt length 1800 mm Table length 1200 mm With support rail Support rail length 3000 mm Feed speed 3/6/12 m/min. Motor power drive motor 7.5 kW Air connection 6 bar Brush unit in the outlet The abrasive belt is guided over three rollers. Between the two lower rollers is the sanding pad. To get a clean cut, the front lower roller has been rubberized. She takes care of the pre-grinding, and the sanding pad behind it the finishing touches. Weight 798 kg with pallet Dimensions with support rail 3000 mm x 1200 mm x H 1700 mm Dimensions without support rail 1300 mm x 950 mm x H 1700 mm

grinding machines /Grinding machines
date: 25.03.2024 add to watchlist
Machine:   Grinding machines
item-No.: 162489929
used

Grinder for bucket seats with 2 air bellows

grinding machines /Edge sanding machines
date: 25.03.2024 add to watchlist
Machine: EHEMANN XII LOD Edge sanding machines
item-No.: 144522861
used

Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm

grinding machines /Wide belt grinding machines
date: 25.03.2024 add to watchlist
Machine: BĂĽTFERING MA2W 1100 Wide belt grinding machines
item-No.: 161092522
used
Price: 6.800 €

Wide belt sanding machine BĂĽtfering Type: MA2W1100 Year of construction: 1983 Grinding width 1100 mm 2 grinding units Grinding roller motor power 15 kW and Sanding shoe motor power 15 kW With driven cleaning brush motor 0.55 kW Feed with 2 speeds 10 and 20m/min. Feed motor 1.8 kW Vacuum transport carpet complete with fan Constant table The complete machine upper frame is moved via four trapezoidal threaded spindles. Sanding belt width 1110 mm Sanding belt length 1900 mm Workpiece thickness maximum 150 mm Total connected load 35 kW Industrial version Suction connections 2 x 200 mm, 1 x 160 mm diameter Weight approx. 3.800 kg Dimensions 2500 mm x 1750 mm x H 2000 mm

grinding machines /Brushing grinding machines
date: 25.03.2024 add to watchlist
Machine:   Brushing grinding machines
item-No.: 162248881
used
Price: 3.800 €

Distributor brush machine Working width 1250 mm 2 obliquely arranged, driven distributor brushes each 0.37 kW Brush length 1800 mm, diameter 240 mm Height adjustment by handwheel 0 – 150 mm Transport belt width 1250 mm Feed speed 2 stages slow-fast with exhaust fan on the machine Machine dimensions: L 3000 mm x W 1600 mm x H 1870 mm Weight approx. 1500 kg

grinding machines /Grinding machines
date: 25.03.2024 add to watchlist
Machine:   Grinding machines
item-No.: 160073143
used

Long belt grinding machine Type DZJA250 Year of construction 1983 Table size 2500 mm x 1350 mm 2 x sanding shoe available In sizes 1200 mm x 150 mm and 250 mm x 150 mm Table height adjustable with crank Table height adjustment by 500 mm Sanding belt pre- and counter-run Motor power approx. 4 kW Suction connection diameter 2 x 120 mm Shipping dimensions 3550 mm x 900 mm x 1500 mm when the work table is dismantled

grinding machines /Edge sanding machines
date: 25.03.2024 add to watchlist
Machine: REHNEN Junior R1 Edge sanding machines
item-No.: 149506779
used

Edge grinding machine Rehnen -new- Type: Junior R 1 with motor band oscillation with support table at the deflection roller Additionally included in the scope of delivery is an angular and miter stop Engine power 2.2 kW Tape speed 22 m/sec Grinding belt dimension 2280 x 150 mm Abrasive back wall 850 x 150 mm Grinding unit swivelable 90 - 180° Grinding belt tension pneumatic Table size 750 x 350 mm The top in heavy casting with built-in three-phase motor 380 V, 2.2 kW 2850 rpm The machine is equipped with built-in switch-plug combination; Motor circuit breaker and main switch according to VDE Dimensions of the abrasive belt rear wall 850 x 150 mm the abrasive back wall is glued with a graphite sliding surface Steel table adjustable in height by spring pressure Grinding belt dimension 150 x 2280 mm The machine is supplied with 2 pieces of grindin ...

grinding machines /Form grinding machines
date: 25.03.2024 add to watchlist
Machine: CALMBACH + SöHNE  Form grinding machines
item-No.: 151783908
used

Grinding machine for curved parts Molded part grinding machine Make Calmbach & Söhne Double-sided grinding of shaped parts Oscillating rubberized grinding rollers Workpiece thickness maximum 120 mm Workpiece width maximum 130 mm Engine strength 2 motors 1.5 kW each Oscillation electromotor 4 speeds Suction connection diameter 120 mm Includes 20 grinding belts grit 60 + 120 Dimensions 1200 mm x 1500 mm x H 1550 mm

grinding machines /Brushing grinding machines
date: 25.03.2024 add to watchlist
Machine: HYMMEN BĂĽrstenmaschine Brushing grinding machines
item-No.: 144499453
used
Price: 2.400 €

Brush machine Hymmen With 3 brushes Brush 1 500 lobe brush for smoothing the surface Brush 2 sisal brush for glossy surfaces Brush 3 soft cleaning brush Working width 1300 mm Feed speed 3 - 20 m/min. With replacement brushes Total dimensions L 2000 mm x W 3000 mm x H 1500 mm