120 results

similar results found in category granulation plants

item-No.: 142307570
Recycling plant completely incl. single-screw extruder suitable for hot-cutting granules. Manufacturer: Erema Type: RGA-63T / K63-20D Built: 1997 Engine hours: 59005 Facilities: Conveyor belt FB 5040/60; Dust and soundproofing tunnels; Scrap metal detector DLS; Roller feeder RZ 60/80; RM combination RM 63 T; 2 control cabinets with air-to-water heat exchanger; 4 HM knives; Shock sensor; Drain ring with 4 nozzles; Control system for precompression degree; inlet and outlet adapters; Hot tee granulation HG  ...
item-No.: 141572034
-
22.900 €
country-at AT
The Easy 120 is a high-performance recycling plant for the extraction of copper and aluminium from old and residual cables. The Easy 120 impresses with its small footprint, easy operation and low energy consumption. The system is a semi-contained system and can be used in one-man operation. With the Easy 120, pre-shredded cables or cables can be processed in its entirety. We offer suitable shredders for the pre-shredding of cables. The introduced electrical cables are homogeneously crushed in the rotor mill (by  ...
item-No.: 141146752
We offer a used, factory-refurbished rapid type GK 650 granulator. The granulator has 2x granulators, rotor length 650 mm, 10 rotor blades each, two stator knives, 2 x 37 kw motor via V-belts
item-No.: 141146750
We offer a used, factory-refurbished granulator RETO System REDOMA Type GA 45 - 650. The granulator has 2x granulators, rotor length 650 mm, 10 rotor blades each, two stator knives, 2 x 45 kw motor via V-belts
item-No.: 141146748
We offer a used, factory-refurbished granulator RETO System REDOMA Type GA 110-D. Please refer to the data sheet for the technical data.
item-No.: 140962971
Single shaft shredder particularly suitable for reshredding, granulation of pre-shredded material. Application: Commercial waste for thermal or valuable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor ingestics. Etc. Lindner Power Comet 2800, refurbished machine 08/2019 Built in 2010 Control cabinet: as new 500 h, dustproof with recooler Control panel: new Drive motors: ABB 2x200 kW New New lacquer /RAL: 5003/7001 Rotor bearing/removal sleeve/shaft seals : new  ...
item-No.: 139975280
MECCANOPLASTICA GRANULATOR 1.000 mm. wide rotor 90 kw a.c. power 12 mm drilled grid n.3 knives on rotor + 2 on stator electric cabinet hopper 1030 x 1.000 grinding chamber 1040×710 mm. rotor diam. 700 mm. average production 900/1000 kg/h depending on materials machine totally overhauled
item-No.: 139170386
GEA Aeromatic-Fielder MP1 Fluid Bed Granulator, with two bowls suitable for batch sizes from 1 to 5kg (0.5kg/l), and 1.1 to 8kg, with drying, top spray granulation, and precision coating of pellets/mini tablets. WIP system. Class D containment, 10 bar pressure, ATEX, PLC controller on front panel, 3 stainless steel filter cartridges, solvent emission control, spray systems, full inlet air handling and preparation system. New in 2005 and unused.
item-No.: 139170378
GEA Aeromatic Fielder MP1 Labor-Wirbelschichtanlage in Ex-Ausführung, 2 Materialbehälter für Chargengrößen zu 1-5 kg (0,5 kg/l) und 1,1-8 kg, Anlage zur Wirbelschichtsprühgranulation (Top-Spray Granulation), Trocknung und Pelletbeschichtung bzw. Minitabletten-Beschichtung, Through-the- wall-Installation, Lösungsmittelemissionskontrolle, WIP-System zur Reinigung, Druckstossfest bis 10 bar, inkl. Zuluftaufbereitung mit Vorfilter, Vorwärmer, Befeuchter, Kühler/Kondensator, Erhitzer und HEPA Filter, Bj. 2005 ( ...
item-No.: 136844897
Single screw repelletizing line Screw Diameter: 100 mm Output Capacity: 500 kg/h Degassing System: Yes
item-No.: 136695607
This granulator is able to handle a wide range of materials to reduce them in dimensions from 4-30 mm depending on the grid used. Some of the materials that this machine can grind: pre-shredded tyres, CDR and CSS, fibrous or textile scraps, latex, polyurethane foams, tannery and leather scraps, rigid or flexible plastics, paper and cardboard, waste from agriculture, biomasses, etc. Specifications -Grinding chamber made of thick steel sheet suitably welded with subsequent distension in the oven before precisio ...
item-No.: 136695606
This granulator is able to treat a wide range of materials to reduce them in fractions of dimensions ranging from 4mm to 20mm. Its main applications are: • Fabrics and fibres • Copper Cables • Latex, polyurethane foams and films • Leather and animal skins • Paper and cardboard • Plastics: PVC, HDPE, LDPE, PP, PS, ABS, PET • Organic matter: RDF and biomasses, roots and fruits, wood • Rubber: Tyres, technical articles, vulcanized and natural rubber.
item-No.: 136114686
BAUSANO TWIN SCREW MD115 \ nMD115/36 Granulationslinie \ rBaujahr 2010Granulationslinie, die sich aus: \ rBausano MD 115/36 Doppelschneckenextruder von 2010 für WPC-GranulesLiquid-Ring-Schneiden Gamma Meccanica Jahr 2016 Modell TDA 5.0\ \ \ NCentrifuge C405L
item-No.: 136114685
BAUSANO TWIN SCREW MD115 MD115 / 36 granulation line Construction year 2010 Granulation line composed of: Bausano MD 115/36 twin-screw extruder of 2010 for WPC granules Liquid ring cutting Gamma Meccanica year 2016 model TDA 5.0 Centrifuge C405L
item-No.: 135891266
VENTILUS® Systeme können auch als Teil einer Mehrzweck-Nassgranulationslinie in Kombination mit einem Hochscheren eingesetzt werden. Aufgrund ihrer Anwendbarkeit sind sie ideal für die Lohnfertigung. Das geschlossene Materialübertragungssystem verfügt über eine eingebaute Kegelmühle für nasse und trockene Fräsen. Horizontaler Produktfluss mit kompakter Bauweise und geringem Platzbedarf im Reinraum Aufladung in verschiedene Containergrößen mit konischer Mühle, die sowohl für nasse als auch trockene Fr ...
item-No.: 135891265
VENTILUS® systems can also be used as part of a multi-purpose wet granulation line in combination with a high-shear mixer. Owing to their application flexibility, they are ideal for contract manufacturing. The closed material transfer system has a built-in conical mill for wet and dry milling. Horizontal product flow with a compact design and small footprint in the cleanroom Discharge into different container sizes with a conical mill that is suitable for both wet and dry milling processes Ergonomic, integral c ...
item-No.: 135891089
Small lecturer especially for cable recycling. The system has the following components: -Granulator 300 mm -Z-Separator/Zigzag -Turbine mill -Separation table -Filter Tower The plant was delivered to 06/2016 has about 600 operating hours and will be available as part of a connecting purchase approximately 07/2019.
item-No.: 134680090
Single-shaft shredder, slow LAU fender especially suitable for the shredding of plastics. Application: Granulation of mixed plastics to thermal and value material recovery; Shredding paper, cardboard boxes, files, granulation of various art and foams, containers, leather, textiles, floor coverings, cable, computer scrap, wood,. Major record performance for mixed plastics to ca. 1, 5-2,0 to/h-(sieb 30mm) Filler: 2800 x 2000 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Rotor cooling: prepared  ...
item-No.: 134087626
UNION STRAND PELLETIZING MILL TG 300 RS 22 kw motor 380 V- 50 Hz Motor pulley diam. mm.160 Cutter pulley diam. mm.300 Overall dimensions mm.905×970 x 1.810 h Material side infeed 1.410 mm. Discharging height 860 mm. Speed adjustment through inverter
item-No.: 133597785
With the compact cable peeling machine MAXI 100 cable with diameter from 6 up to 90 mm can be processed. The cable insulation is cut by the proven two blade system and the copper or aluminum core can be easily removed. The machine is infinitely adjustable via a hand crank on all cable diameter. The cutting depth of the blade (sheath) is also adjustable, allowing the processing of different cable types (E.g. triangle wires from power cable with a lead sheath... Complete intrusion protection, foot switch, moder ...
item-No.: 133154837
-
35.000 €
country-pl PL
For sale is a new cable granulating system. technical data: Voltage: 380V Frequency: 50 Hz Total capacity: 53 kW Total number of amperes: 125A Weight: 3000kg Dimensions: 3, 5m x 2, 0 m x 2. 8 m Cable diameter: 0.3-20 mm Year of construction: 2018 Performance: 300 350 kg / h cable per hour the performance depends on the type of cable. It d [sharpen only dry cables are granulated! Operation guarantee: 1 month New machine costs â?¬35,000 net plus statutory VAT. The cable granulating s ...
item-No.: 132778941
-
590 €
country-de DE
Pellet mill ALBIS MK400. 175 Max 16 Amper 3 kW Weight: approx. 230 kg to give due to production
item-No.: 132487268
Der Granulator GA 75 - 10 mit seinen vier Schneidpunkten und neun Reihen mit Rotormessern ist für Altkabelaufbereitung, Granulierung von weichen Metallen, Kunststoff, Papier und anderen weichen Materialien geeignet. Dank des Wechselsiebsystems ist es möglich, Körnungen von 3 mm bis 12 mm zu produzieren. The granulator GA 75 - 10 with its four cutting points and nine rows of rotor blades is suitable for waste cable recovery, granulation of soft metals, plastic, paper an other soft materials. Because of the ...
item-No.: 132487269
The granulator GA 75-10 with its four cutting points and nine series with rotor blades is suitable for old cable preparation, granulation of soft metals, plastic, paper, and other soft materials. Thanks to the removable filter system, it is possible to produce grain sizes from 3 mm to 12 mm. The granulator GA 75-10 with its four cutting points and nine rows of rotor blades is suitable for waste cable recovery, granulation of soft metals, plastic, paper on other soft material. Because of the alternating screen sy ...
item-No.: 132341243
item-No.: 132296229
General information on the Pelletizer The granulator consists essentially of a 6-based on a base plate, table-shaped frame on which meal housing, motor, and controls are built. The grinding housing is divided into horizontal centers. In the for inspection purposes by about 60 ° hydraulically open swivel housing equipped with a hopper upper part, 4 continuous along the entire length of the cutting stator knives are arranged. The rotor is equipped with 5 knives of rows of and is driven by a motor via v-belts. I ...
item-No.: 132097065
STARLINGER RECOSTAR 65 COMPACT RECYCLING LINE Constructed in 2005 85 kVA motor average output 200 kg/h depending on material loading belt with metal detector compacot-grinder reel feeding slots extruder 65 mm. screw die face pelletizer good conditions
item-No.: 131484465
Characteristics: Spiral box elevator for optimal protection of the product. The main features are: -economical and practical, cost-effective, modular combination, easy to transport and assemble, reliable operation, low noise and safety. -transport between plants, reduces space, adjustable speed, large load capacity, lightweight design, fast installation. The spiral rail of the conveyor is the key to its unique compact construction that saves valuable floor space. With its small size of 1760 mm in diameter, th ...
item-No.: 131285429
-
9.500 GBP
country-uk UK
Stainless Steel mid-size production conical wet granulator with a capacity of between 4,000 lb/h (1,800 kg/h) and 15,000 lb/h (6,800 kg/h) depending on product. Designed for wet milling size reduction and milling for wet or soaked products, wet blending, uniform sizing of wet granulation in tablet manufacturing. Equipped with hydraulic hand operated lift by Servolift Germany. Lift platform can go up to a maximum machine height of 2407mm. Max. platform weight tolerance 160kg. Includes one screen sieve of holes diam ...
item-No.: 131285430
-
7.500 GBP
country-uk UK
Edelstahl mittlerer Größe Produktion konische nassen Schneidmühle mit einer Kapazität von 4.000 lb/h (1800 kg/h) und 15.000 lb/h (6.800 kg/h) je nach Produkt. Entworfen für nass Fräsen Zerkleinerung und Fräsen für nass- oder Produkte, nasse Mischung getränkt, gleichmäßige Dimensionierung der nassen Granulation in Tablet-Herstellung. Ausgestattet mit hydraulischen handbetriebenen Aufzug von Servolift-Deutschland. Hebebühne kann gehen bis zu einer maximalen Maschinenhöhe 2407 mm. Max. Plattform Gewichts ...
item-No.: 131217859
-
470.000 €
country-ro RO
Description Brand REGUTEC Model REGUPLANT BLUELINE 9000 ID 2000 Status Active Price 470.000 € + VAT Year of manufacture 2000 Fuel Altele Power 135 KW Location Budapesta, Ungaria Rubber recycling line REGUTEC REGUPLANT BLUELINE 9000. Components and line stages: 1. Primary crushing SBH 1600/950 Double-Shaft Crusher 2. Secondary crushing Regumatic M2000 R2 Single-Shaft Crusher 3. Granulation 4. Classification equipment 5. Air suction 6. Utilities Double shaft shredder ca 4 tons tyres/hr  ...
item-No.: 131054810
-
350.000 €
country-es ES
Sandwich panel production line 9200 x 600 x 40
item-No.: 130814515
-
BN 2.800 €
country-de DE
Rapid mill 400V connection
item-No.: 128098639
Through the use of a fast-rotating turbine mill allows the processing of cables of all kinds. The turbine mill ensures a homogeneous shredding of the cable material and provides the "supply recorded" fine strands. Processed are aluminum/copper cable eg. budget cable, wires and fine stranded cable, hard cable... To eliminate cables with following ingredients are: Oils, bituminous substances, soft rubber and gel-containing cables. As a result, the combined supplies pure end granules.  ...
item-No.: 128098637
The easy 120 is a powerful recycling plant for the production of copper and aluminium from old and residual cables. The easy 120 offers small footprint, easy operation and low energy consumption. The system is an in itself closed system and can be used in single man operation. In the easy 120 can be processed of crushed cables or even cables as a whole. Pre-cutting cables: see field chopper. The tabled electrical cables are crushed homogeneously in the rotor mill (multiple rotating knife, standing counter blade) ...
item-No.: 128098563
The T150 cable granulating system is a system for the recovery of copper or aluminium cables. The T150 is equipped in addition to an integrated turbine mill with a zig-zag separator which is a novelty in this size. By these integral components, the facility is perfectly suitable for the processing of mixing and wire cable. Head of data or computer can be processed also cable. Technical data: Feed material: mixed cable iron-free Throughput: up to approx. 150 kg / h Drive: electric motor 19 kW Cutting mechani ...
item-No.: 128082320
The easy 180 is a powerful recycling plant for the production of copper and aluminium from old and residual cables. The easy 180 features small footprint, easy operation and low energy consumption. The system is an in itself closed system and can be used in single man operation. In the easy 180 can be processed of crushed cables or even cables as a whole. Pre-cutting cables: see field chopper. The tabled electrical cables are crushed homogeneously in the rotor mill (multiple rotating knife, standing counter  ...
item-No.: 127412476
-
BN 270.000 €
country-de DE
3-stage before reduction Year of construction: 2005 1 level - number of blades: 17 pieces 2 stage - number of blades: 32 pieces 3 level - number of blades: 39 units Performance of electric motors: 3 15 KW The knife of before reduction were completely replaced by new knife in 2014. Production line with excess Ribbon Magnet: (plate magnets): Year of manufacture 2004 Production line with head Magnet: Transported material from before reduction for the material hopper. Year of manufacture: 2007 Material Hopp ...
item-No.: 127277573
PREVIERO GRINDER MU715MConveyor Gürtel mit Metall DetectorInfeed 900 × 1500 MmGranulation Kammer 760 × 1500 MmMotor macht 200 KwRotating Messer 6Fixed Messer 2Grid 12 MmExtraction Vent 18,5 kWElectrical cabinet\ nTilting Trayhydraulic Power Ladestation für Messer und Grid ReplacingReel Fütterung Einheit (Fehlen von Motoren und Getriebe) Construction Jahr 1995
item-No.: 127277572
PREVIERO GRINDER MU715M Conveyor belt with Metal Detector Infeed 900×1500 mm Granulation chamber 760×1500 mm Motor power 200 kw Rotating blades 6 Fixed blades 2 Grid 12 mm Extraction vent 18.5 kW Electrical cabinet Tilting loading tray hydraulic power station for knives and grid replacing Reel feeding unit (missing of motors and gearboxes) Construction year 1995
item-No.: 127277568
PREVIERO GRINDER MILL MU 408 Mill MU 408 Construction year 1992 Infeed 410×790 mm Granulation chamber 400×800 mm Motor power 55 kw Rotating blades 3 Fixed blades 2 Grid 12 mm Extraction blower 15 kW Electrical cabinet Tow group 1 spare grouup of knives (rotor+stator)+ 1 template for blades adjustment
item-No.: 127277569
PREVIERO Mühle Mühle MU 408Mill MU 408Construction Jahr 1992Infeed 410 × 790 MmGranulation Kammer 400 × 800 MmMotor power 55 KwRotating Messer 3Fixed Messer 2Grid 12 MmExtraction Gebläse 15 kWElectrical cabinet\ nTow group1 Ersatzteile Grouup Messer (Rotor + Stator) + 1 Vorlage für klingen Anpassung
item-No.: 127277554
CMG GRINDER 700 mm. Infeed 712 × 410 mm.Granulation Kammer 710 × 430 mm.Motor macht 22 KwRotating klingen 3 + 3Fixed klingen 2 + 2Grid Löcher 3 MmProduction 490 kg/h (mit 8-mm-Raster) The Maschine ist vorbereitet für Extracion Vent (fehlende) \ RConstruction Jahr 2001
item-No.: 127277553
CMG GRINDER 700 mm. Infeed 712×410 mm. Granulation chamber 710×430 mm. Motor power 22 kw Rotating blades 3 + 3 Fixed blades 2 + 2 Grid holes 3 mm Production 490 kg / h (with 8 mm grid) The machine is prepared for extracion vent (missing) Construction year 2001
item-No.: 127261593
PREVIERO GRINDER MU408Construction Jahr 1996Infeed 490 × 910 MmGranulation Kammer 400 × 800 MmMotor macht 37 KwRotating Messer 3Fixed Messer 2Grating Löcher 12 MmMaterial Extraktion von BlowerBlowing Power 15 kW\ nElectrical CabinetTow Gruppe, 1 Satz neue Messer, 1 Satz neue klingen gegen 1 Vorlage für klingen Anpassung
item-No.: 127261592
PREVIERO GRINDER MU408 construction year 1996 infeed 490x910 mm Granulation chamber 400x800 mm Motor power 37 kw Rotating blades 3 Fixed blades 2 Grating holes 12 mm Material extraction by blower Blowing power 15 kW Electrical cabinet Spares : 1 kit of new rotor + stator knives template for blades adjustment
item-No.: 127261528
PREVIERO GRINDER MU 408 N Construction year 1992 Infeed 410×790 mm Granulation chamber 400×800 mm Motor power 37 kw Rotating blades 3 Fixed blades 2 Grid 12 mm Extraction blower 15 kw Electric cabinet Tow group, 1 spare group of new knives (rotor+stator)
item-No.: 127261529
PREVIERO Mühle MU 408 NConstruction Jahr 1992Infeed 410 × 790 MmGranulation Kammer 400 × 800 MmMotor power 37 KwRotating Messer 3Fixed Messer 2Grid 12 MmExtraction Gebläse 15 KwElectric CabinetTow Gruppe , 1 freie Gruppe von neuen Messern (Rotor + Stator)
item-No.: 127261527
PREVIERO Mühle MU 408 NConstruction Jahr 2003Infeed 500 × 900 MmGranulation Kammer 400 × 800 MmMotor power 75 KwRotating Messer 3Fixed Messer 2Grid 12 MmExtraction Gebläse 15 kWElectric CabinetTow Gruppe
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)