560 results

similar results found in category peripheral equipment (e.g. heating,cooling,drying)

item-No.: 142037233
Air-cooled liquid chiller kit in closed compact design, ready for connection, functional and performance tested. The device design complies with national and international standards and guidelines in accordance with the CE declaration of conformity. Operating temperatures/cooling capacity 12/7°C: 688 kW/591,680 kCal/h 15/10°C: 826 kW/710.360 kCal/h 20/15°C: 990 kW/851.400 kCal/h Ambient temperature: 35 °C Technical data Operating voltage: 400V/3Ph/50Hz Power consumption: 221.98 kW Refrigeration car ...
item-No.: 142037231
Air-cooled liquid chiller kit in closed compact design, ready for connection, functional and performance tested. The device design complies with national and international standards and guidelines in accordance with the CE declaration of conformity. Operating temperatures/cooling capacity 12/7°C: 40.43 kW/34,787 kCal/h 15/10°C: 45.60 kW/39.238 kCal/h 20/15°C: 55.32 kW/47.602 kCal/h Ambient temperature: 35 °C Technical data Operating voltage: 400V/3Ph/50Hz Power consumption: 13.80 kW Refrigeration c ...
item-No.: 142002649
43.6 kW, MTA cold water chiller, air-cooled, type: TAEevo Tech 161 + P3-20 NON FERROUS M.T.A. S.p.A. TAEevo Tech 161 are air-cooled compact water coolers that are suitable for outdoor installation up to -20°C. Including crank case heating, phase monitoring, buffer tank 255 litres and built-in P3-Circulation pump and "Non-Ferrous" water circuit (closed stainless steel tank with copper evaporator) Cooling capacity kW 43.6 Cold water temperature outlet/inlet (°C): 7 / 12 Volume flow (m3/h) 7.48 Availa ...
item-No.: 142002479
-
130 €
country-de DE
Start-up delayer for mobile dust collectors, suction systems, etc. When the machining machine is switched on, the suction automatically switches on after 2-3 seconds, thus avoiding overloading of the fuse. The suction continues for 4 seconds after the machine is switched off. Devices with 230 volts or 400 volts three-phase current can be operated. Please refer to the PDF file with our terms and conditions and order form. The machine can be presented on site by appointment. We only offer machines that are re ...
item-No.: 142002427
-
900 €
country-de DE
Suction system, suction device, clean air deduster, clean air exhaust, mobile duster Suction connection 120mm Drive motor 2.2kW, 400V Rated volume flow 980 m3/h Minimum volume flow 813 m3/h Vacuum 1100 Pascal Wood dust, residual dust class 2, H2, 0.2mg/m3 Filter cleaning manually with ratchet Mobile Dimensions approx. 1200 x 560 x 1700mm (LxWxH). Weight approx. 130kg. Please refer to the PDF file with our terms and conditions and order form. The machine can be presented on site by appointment. We o ...
item-No.: 141994194
LAROCHE FIBER RECOVER PLANT WORKING WIDTH 1000mm (40”) YEAR 1983 COMPLETE MACHINE ON FLOOR WITH BAILING PRESS Specification and equipment details 1-Incline apron with magnetic pulley and sorter 1- Conveyor apron with metal detector 1-Electric cabinet 1-Static filter 3 dia 600 1-Static filter 3 dia 600 1-Condenser Vent Piping 1-Condenser Vent Piping 1-Condenser model 71 – GF 888 1-Transport piping 2-Shredder 1-Intermediate chimney 1-Transport piping 1-Condenser model 71 – GF 891 1-Baffle mag ...
item-No.: 141909622
2 units of temperature control Kasper 150-9-WN built 1996 - Medium: water - temperature: up to 150°C - automatic water refilling 2 units of temperature control Kasper 150-N, built 1997 Details - Medium: water - temperature: up to 150°C - automatic water refilling Temperature control device Tool-Temp TT157E, built 2000 Details - Medium: Water Oil Temperature control unit AVSG TG150, built 1989, Details Temperature: 150°C - Medium: Water (TG150)
item-No.: 141526749
WOOD FUEL HOT AIR GENERATOR - FABBRI F85 CV year of manufacturing 1990 max power 95.000 kcal/h working power 85.000 kcal/h air output 6.300 m3/h fumes fan extractor voltage 380V-3ph
item-No.: 141525869
Injection moulding machine Ferromatik FX 125 ready to work in good condition! FX 125 in good condition Built: 1990 new pump at 30300 h Core train Coloring Ejector plate fuse Relay for rotary motor without visible peripherals, accessories + crane!
item-No.: 141481105
- High-speed motor 15 kW- filling opening 350/180 mm
item-No.: 141480979
The machine is in very good condition. Technical data: Brand: Spänex Type: UL 50 RW Y.O.M.: 1992 45 KW 3500 cubic meters / h
item-No.: 141146763
Air-cooled liquid chiller kit in closed compact design, ready for connection, functional and performance tested. The device design complies with national and international standards and guidelines in accordance with the CE declaration of conformity. Operating temperatures/cooling capacity 7/12°C: 2.27 kW/1,949 kCal/h 10/15°C: 2.58 kW/2,222 kCal/h 15/20°C: 3.20 kW/2.749 kCal/h Ambient temperature: 35 °C Technical data Operating voltage: 230V/1Ph/50Hz Power consumption: 1.43 kW Refrigeration carrie ...
item-No.: 141008454
2 Poultry plucker from Fadesa and Madevac plus one electrical stunner - one plucker with 2 rows per bank, 36 plucking discs per bank , total 72 plucking discs. - one plucker with 2 rows per bank plus one bottom row. 40 plucking discs per bank, total 80 plucking discs. - one electrical stunner for 6000 b/h. - one Linco cropping machine
item-No.: 140962920
Distance approx. 500 mm with 5 x 100 mm roll pitch = 500 mm depth Floor fastening Length approx. 3000 mm
item-No.: 140962864
1 shelf 5260 mm long, consisting of: 8 stands, 4 intermediate trusses, 3 mounting angles 830 mm, 1 console, 12 struts, 4 foot angles, 1 Roller holder, 1 roll Shelf width 830 mm Height 1920 mm Stacking package approx. 350 mm Weight approx. 180 kg 2 extension compartment 5260 mm long, consisting of: 4 stands, 4 intermediate trusses, 3 mounting angles, 1 console, 6 struts, 4 foot angles, 1 roller holder, 1 roll Width of the attachment 600 mm Stacking package approx. 350 mm Weight approx. 115 kg
item-No.: 140957029
12 edition compartments Adjustable Length 1500 mm, depth 540 mm, height 1890 mm Mobile
item-No.: 140956949
Arburg 470C 1500-400 / Machine in perfect technical condition Built: 2007 Injection unit: Screw diameter: 45mm Spray weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Tie-bar spacing: 470x470 mm Plate size: 685x685 mm Ejector: hydraulic Closing unit: hydraulic Control: SELOGICA - Touch control panel Additional equipment: Air valve x 1 Control with core pull Control with hot ducts x 6 Spraying unit hardened - Bimetall Proportional valve on t ...
item-No.: 140904195
Data Compressor DKS 620: Power connection 400V 4kW Eff. Delivery quantity at 12 bar 485 l/min Compression final pressure 10 bar Container capacity 270 L 2 cylinders LxWxH: 850 x 830 x 1800 mm Weight approx. 155 kg Compressed air connection: 3/4 inches Data Fine filter V 03/10: Content 0.5 Ltr. Filter element: DV1000 Data refrigeration dryer DK 700 N: Model: JN 34018-SCBS-F No: 119906-2022 Current: 230V / 0.22 kW Operating pressure max: 16 bar Data Oil-Water Separator Ã?watec 10: Opera ...
item-No.: 140667710
With trapezoidal aluminium sheets, Brunner control, measuring and control system, Installed heating capacity: 233 kW ( 200 000 kcal/h) Designed for oak 40mm strong Heating system: hot water Feed temperature: 90°C Return temperature: 70°C Dimensions 9x9x4.5 m approx. 200 cbm gross.
item-No.: 140474208
BOY 80M Built: 1998 Injection unit: Screw diameter: 42 mm Spray weight: 179g Spray pressure: 1532 bar Dosing volume: 200.9 cc Clamping unit: Clamping force: 80 t Tie-bar spacing: 410x358 mm Plate size: 680x555 mm Ejector: hydraulic Closing unit: hydraulic Control: PROCAN CT Additional equipment: Water batteries from the Wittmann brand, 8-fold Machine has the following peripherals: - 2 x dosing device, plastic container, vacuum suction conveyor and mixer Dimensions: Weight: 2465 kg Leng ...
item-No.: 140474206
BOY 90A / Engine hours: 22,000 Built: 2008 Injection unit: Screw diameter: 48 mm Spray weight: 252 g Spray pressure: 1320 bar Dosing volume: 280.5 cc Clamping unit: Clamping force: 90 t Tie-bar spacing: 430x360mm Plate size: 635x610 mm Ejector: hydraulic Closing unit: hydraulic Control: PROCAN - touch control / color screen Additional equipment: Machine in very good technical condition Air valve x2 Control with hot ducts x6 Control with core pull Spraying unit hardened - Bimetall Water  ...
item-No.: 140465483
-
350 €
country-de DE
- Motor 5.5 kW / 400 V - Air capacity 2850 m3/h - Connection-Dm. 300 mm
item-No.: 140372419
Qty. 1 Second-hand billet casting production plant The steelmaking facility that operated by April 2018 after carrying out two revisions after the first installation in 1994. The sale targets steelmaking facilities (EAF, LF, CCM) it covers all facilities including facilities (oxygen plant, peripheral equipment, overhead crane, pump stations, etc. Mfc.: Nikko, Kitashiba, Kumsoo, Toshiba, Hyundai, Concast, Mhises, M. Tec, Kyoung Do Industry, Dong Yang Mach., Transfluid, A.P. Engineering, Atlas Copco, Kumoh Heav ...
item-No.: 140174755
KRAUSS-MAFFEI KM 350/1900 C1 , año 2000 . This machine will be delivered complete checked repaired and tested and can be shown under power ! Description Equipment: 6 core-pullers, robot interface. Technical details WORKING HOURS 85000 SCREW DIAMETER 60 mm TRAVEL OPENING 920 mm DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 530 - 1.450 mm DISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm PLATEN SIZE 1.100 x 1.120 mm YEAR OF BUILDING 2000 CLAMPING FORCE 3.500 kN NOMINAL CAPACITY OF PUMP MOTOR 75 kW INS ...
item-No.: 140174553
Vacuum dryer KRONSEDER Eurovac® - KVT 550 E Compact design for drying sawn timber - new - Capacity/stacking space cbm 5.2 Container diameter mm 1400 Length of the system mm 6000 Width of the system mm 1700 Height of the system mm 1900 Electric heating KW 9.0 Length of wood stack mm 5300 Width of wood stack mm 900 /1000 Height of the wood stack mm 1100 Connection value (heating) KW 12.5 Average consumption of heating medium Connection value (current) KW/h PHW90°C KW 3.0 6,5 Avera ...
item-No.: 140126475
Universal material stand 4 shares G&-4107-H50FP
item-No.: 140030024
KRONSEDER Eurovac® - Vacuum interval dryer type KIT 150 Exhibition machine Compact design for drying sawn timber Capacity/stacking space cbm 1.5 Container diameter mm 900 Length of the system mm 5800 Width of the system mm 1000 Height of the system mm 1450 Length of wood stack mm 4300 Width of wood stack mm 700/800 Height of the wood stack mm 600 Connection value (current) KW 6 Average consumption KW/h 2.5 Number of stacking strips piece 60 Weight kg 900 Spraying water ...
item-No.: 139876082
Nur für die entsprechenden Tests verwendet.
item-No.: 139876081
Only used for the appropriate tests. Condition: New
item-No.: 139876077
Shrinkrapper only film brand SMI model LSK 30F new. The equipment was only used for the appropriate tests. Condition: New
item-No.: 139876066
Jahr: 2004. Bedingung: Sehr gut, Eigenschaften: , depalletizer von leeren Behältern für Kunststoffbehälter, in sehr gutem Zustand.
item-No.: 139876065
Year: 2004 Condition: Very good Characteristics: Depalletizer of empty containers for plastic containers, in very good condition.
item-No.: 139876042
Appendix 1 CKT 110 Built: 1996 Capacity: 110 cm3/h dry air Through. Consumption:1.9 KW/h Connection capacity: 6.6 KW Appendix 2 CKT 300 Built: 2000 Capacity: 300 cm3/h dry air Through. Consumption:5.9 KW/h Connection power: 12 KW Appendix 3 CKT 300 Built: 2008 Capacity: 300 cm3/h dry air Through. Consumption:5.9 KW/h Connection power: 12 KW
item-No.: 139623095
-
BN 14.900 €
country-de DE
Briquette with oil cooling power 150 KG / h Attachment container 2000 x 2000 x 1400 5250 operating hours good condition
item-No.: 139568597
-
8.500 €
country-de DE
grinding length 630 mm centre hight 140 mm grinding wheel 400 x 40 x 127 mm peripheral speed of grinding wheel max. 45 m/s. grinding spindle speeds: 2040,0 2560 r./min. workpiece spindle speeds: 22,4 - 710 r./min. internal grinding unit workpiece spindlestock rotatable 90° infeed of grinding spindlestock hydraulic or manual infeed of tailstock sleve hydraulic or manual upper table tiltable for cone grinding control panel electrical cabinet Hydraulic unit coolant  ...
item-No.: 139519463
2.53 kW, MTA refrigeration machine, air-cooled, type: TAEevo M08 M.T.A. S.p.A. TAEevo TECH M08 are minichillers designed for indoor installation. Including buffer tank (open system, no pressure tank) and built-in pump. Air-cooled liquid coolers of the TAEevo series - specially developed for indoor installation as cooler for machines in production. For machine cooling - for temperature control devices - as laboratory cooler - For MRI devices. Cooling capacity kW 2.53 Cold water temp. Exit/entrance: 7 / 12 ...
item-No.: 139519069
1.8 kW, MTA refrigeration machine, air-cooled, type: TAEevo MINI M05 M.T.A. S.p.A. TAEevo TECH M05 are minichillers designed for indoor installation. Including buffer tank (open system, no pressure tank) and built-in pump. Air-cooled liquid coolers of the TAEevo series - specially developed for indoor installation as cooler for machines in production. For machine cooling - for temperature control devices - as laboratory cooler - For MRI devices. Cooling capacity kW 1.8 Cold water temp. Exit/entrance: 7 / 12 ...
item-No.: 139518988
0.9 kW, MTA mini chiller, air-cooled, type: TAEevo M03 M.T.A. S.p.A. TAEevo M03 are small compact mini chiller that are suitable for indoor installation. Includes buffer tank 8 liters (open system, no pressure storage) and built-in circulation pump. Air-cooled water chillers of the TAEevo Tech series - specially developed for indoor installation as circulation cooler for machines in production. For machine cooling - for temperature control units - as a laboratory cooler - For MRI units. Cooling capacity k ...
item-No.: 139470397
Automatic high-performance band saw system Automatical band-sawing machine Make/made : B E H R I N G E R Model: HBP 530 A / 4 HM Built/new : 1998 Condition : good - under power Condition : good - in operation Heavy fully hydraulic band sawing machine for economical and accurate cutting of heavy machinable solid material with carbide saw bands Heavy fully hydraulic operated band-sawing machine for precise cutting of difficult machinable full material with hard metal bands. Cutting area round S ...
item-No.: 139470367
28.3 kW, MTA cold water chiller, refrigeration machine, type: TAEevo Tech 101 + P3 M.T.A. S.p.A. TAEevo Tech 101 are air-cooled compact water coolers that are suitable for outdoor installation. Including crank case heating, phase monitoring, 255 litre buffer tank and built-in P3 circulation pump and open expansion vessel. Cooling capacity kW 28.3 Cold water temperature outlet/inlet (°C): 7 / 12 Volume flow (m3/h) 4.81 Available pump pressure (bar) 2.52 Ambient temperature (°C) 32 Refrigerant R 410A  ...
item-No.: 139470291
Cold water chiller (refrigeration machine), air-cooled 23.6 kW Type: MTA TAEevo Tech 081 + P3 M.T.A. S.p.A. TAEevo Tech 081 are air-cooled compact water coolers that are suitable for outdoor installation. Including crank case heating, phase monitoring, buffer tank 255 litres and built-in P3-Pump. Cooling capacity kW 23.6 Cold water temperature outlet/inlet (°C): 7 / 12 Volume flow (m3/h) 4.04 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Vo ...
item-No.: 139470251
CP2000 Center with Remote Control of Ink Zones, Ink Fountain Roller as well lateral, circumferential and diagonal Register, with Light Pen, Job Memory Card and Touch Screen ALCOLOR Vario damping with circulation and refrigeration Ink Temperature Control AUTOPLATE semi-automatic plate change PRESET automatic size adjustment WashStar automatic ink roller wash-up device automatic blanket wash-up device CleanStar powder suction powder sprayer Grafix high pile delivery with S-Modul serial equipment (central  ...
item-No.: 139170245
Screw compressor KAESER SK 25 T used, Y.O.M. 2011 very good condition approx. 16000 operating hours, run under load approx. 3600 h with control SIGMA CONTROL 2 Operating pressure 11 bar Eff. Delivery quantity (at 10 bar) 2.11 m3/min Engine power 15 KW Sound pressure level 67dB(A) Electrical connection 400V / 3 Ph / 50 Hz Connection compressed air G 1 Refrigeration dryer ABT 25 with electronic condensate trap incl. compressed air boiler OKS Volume 500 L Description of the compressor acco ...
item-No.: 138843499
KRAUSS-MAFFEI KM 350/1900 C1 , año 2000 . This machine will be delivered complete checked repaired and tested and can be shown under power ! Possibility to buy machine with Sepro robot ! Description Equipment: 6 core-pullers, robot interface. Technical details WORKING HOURS 85000 SCREW DIAMETER 60 mm TRAVEL OPENING 920 mm DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 530 - 1.450 mm DISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm PLATEN SIZE 1.100 x 1.120 mm YEAR OF BUILDING 2000 CLAMPING FORCE 3.500 kN  ...
item-No.: 138743715
CNC Universal circular grinding machine SHU321C Brand new, never used. Control FANUC Series Oi-TC 2-axes machine. Diameter of grinding workpiece -external 8-320 mm -internal 30-250 mm Center height 165 mm Maximum grinding length -external grinding (center grinding) 710 mm -internal grinding (in chuck) 135 mm Maximum angle of table rotation -clockwise 3 degrees -counterclockwise 11 degrees Grinding wheel -dimensions for external grinding 450x50x203 mm -peripheral speed 35 m / sec Rotation angle of ...
item-No.: 138743670
3D180 STANKO centerless grinding machine Size of grinding wheel 12 mm Size of a driving wheel 60 mm Grinding wheel peripheral speed, 100 m/s Spindle speed 450-4500 rpm
item-No.: 138743641
-
ON Price
country-de DE
ALKO - pure air suction device type Mobil-Jet 160 - 3.0 kW - 400 volts, CE, suction nozzle 160 mm, nominal volume flow 1850 cbm/h, collective volume approx. 280 l., chassis, dimensions 2185 x 1645 x 673 mm, weight approx. 195 kg
item-No.: 138511981
Wood drying chamber EISENMANN / circulating air dryer used, good condition incl. oil heating VIESSMANN Paromat Simplex, 226 KW Aluminium construction, gross volume approx. 245 m3, wood useful capacity up to 45 m3 Feeding by track wagon Modular system, with internal support frame and steam-tight inner shell. For insulation, mineral wool is inserted between the outer cladding made of aluminium profile plate and the inner shell. The dryer stands on a foundation. Internal dimensions: approx. 13000 x 450 ...
item-No.: 138382469
Supplement compressor SCHNEIDER BST Type 650 used, Y.O.M. 2005, very good condition made in Germany Ready for immediate use, incl. electr. Cable Suction capacity 650 l/min Delivery quantity, effective 520 l/min Working pressure 10 bar, container up to 16 bar Voltage 400 V Engine power 4 kW Container size 7 L Air outlet 3/4"i Dimensions W x D x H 750 x 580 x 750 mm Weight 89 kg 2-cylinder unit with two-stage compression This design increases performance and ensures a very high efficiency.  ...
item-No.: 138250395
D180 Chip extraction blower Fan, suction, chip blower Engine power 2.2 KW 400V 50HZ Speed 2840 U/1 Volume flow approx. 2500 m3/h Connection entrance entrance dia. 180 mm Connection output of 180 mm Wing wheel dia. 400 mm G&-4096-M385C
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)