gluespreader machines used for sale (573)

• Edgebander, edge banding machine • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Adjustable feed speed from 8 m/min up to 20 m/min • Feed motor 4,40 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for 1 edge coil, edge magazine for 1 edge coil • HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive • HOLZ-HER 1926 K pressure group with (1+2) rollers • HOLZ-HER 1819 snipping unit, 2 x motor 0,45 KW-12000 rpm • HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1927 profile scraping unit • HOLZ-HER 1964 flat scraping unit • HOLZ-HER 1944 ed ...

Technical data: - Working height ¦ 950 mm - Pneumatic connection ¦ min. 6 bar - Machine length ¦ 4305 mm - Constant feed rate 8 m/min - Workpiece width min: - At workpiece thickness 8-22mm ¦ 70 mm - For workpiece thickness 23-40mm ¦ 120 mm Depending on the workpiece length - Workpiece protrusion ¦ 38 mm - Workpiece thickness ¦ 40 mm - Edge height max. = workpiece height ¦ + 5 mm - Edge material roll ¦ 0.3 - 3 mm - Edge cross-section max. - For PVC ¦ 135 mm² - For veneer ¦ 100 mm² - Roll diameter max. ¦ 830 mm - Strip edge material ¦ 0.4-3.0 mm - Edge cross-section max. - For strips ¦ 135 mm² Equipment: - Inlet ruler manually adjustable - Workpiece support ball sleeve - Manual chain conveyor central lubrication - Top roller pressure with toothed rubber rollers - Height adjustment manually - Joining milling unit 2x0.7 kW (40 mm milling cu ...

gebr. Edge banding machine G330 FIELDS Year 2013 only 88 operating hours read! Connected load: 5.5 kW Rated current: 14 A Edge thickness: 0.4 - 3 mm Strip material (WxH): 3 x 49 mm Feed speed: 8 m/min. Min. workpiece length: 210 mm Min. workpiece width: 70 mm Workpiece thickness: 8 - 45 mm Heated Introducer Ruler Glue basin Impact shears for pre-cutting roll materials up to 3 mm Pressure unit preloaded with springs 1 straight pressure roller and 1 holding pressure roller Cross-cut saw unit Flush and radius milling unit Control panel with LCD display Wing Scraper Pull-out workpiece support Extraction connection: 120 mm Machine dimensions (LxWxH): 190 x 82.5 x 128.5 cm Weight: approx. 350 kg only. 88 operating hours read Total linear metres: 4,437.6 m The machine comes from a 1-man operation. Manufacturer information

Key data: 3 mm, 60 mm, 4500 mm

SCM Olimpic K360 - Single-sided edge banding machine - Year of construction 2021 - Immediately available - Top condition

Key data: 3 mm, 60 mm, 4000 mm

SCM Olimpic K360 - Single-sided edge banding machine - Year of construction 2016 - Immediately available - Incl. replacement glue basin - Top condition

FORMAT 4 tempora F600 Single-sided edge banding machine - Year of construction 2020 - Immediately available

BIESSE Stream A / 6.0 Single-sided edge banding machine for attaching various edge materials (Melamine, PVC, ABS, Veneer, Wood) - Year of construction 2018 - Including air cushion table - Immediately available - Including dismantling and loading - Including additional replacement glue basins

Code: 0495 Brand: BIMATIC - ITALY Model: BSC 263.10 - CE Standard Automatic edge bander for wood, pvc, veneer, and abs edges, for woodworking shops, custom furniture, furniture, panels, and doors - CE Standard Technical data: Min/max edge thickness 0,4/10 mm Min/max panel height 10/60 mm Min panel width 50 mm Min panel length 70 mm Working speed 8/12 mt/min Adjustable support side transfer for panels Composition: Gluing unit: Rapid-heating glue pot – Glue pot capacity 3 lt Roll material cutting shear Vertical end cutting unit with 2 independent motors, 0,5 Hp at 12000 rpm – Motors tiltable up to 15° Tiltable trimming unit with 2 motors, 0,75 Hp at 12000 rpm Fine finishing unit with 2 motors 0,5 Hp at 12000 rpm Edge scraping unit Overall dimensions mm 3145 x 725 x 1400 h Weight kg 810

Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passage. OVERVIEW OF THE UNIT CONFIGURATION: Electronic control POWER CONTROL PC 20+ PU top pressure rollers instead of rubber rollers Optimization of workpiece spacing Inlet ruler extension by 300mm with additional laminate overhang device JOINING MILLING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A12 with automatic edge retraction – Quickmelt APPLICATION UNIT – Standard application unit replaceable PU glue – Pressure zone with motorized adjustment QA 45 EVA application unit for all types of adhesives and quick changeovers CROSS-CUT UNIT CHAMFER/STRAIGHT 2 X 0.35 KW PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT PNEUMATIC 2-POINT ADJUSTMENT CAPS PRE-MILLING UNIT 2 X 0.55 KW counter-rotation – with PNEU ...

Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passage. OVERVIEW OF THE UNIT CONFIGURATION: JOINING MILLING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A8 with workpiece preheating, fill level control, Quickmelt application unit, magazine and motorized pressure zone CROSS-CUT UNIT CHAMFER/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT MULTI-STAGE MILLING UNIT MS 40 COUNTER ROTATION PNEUMATIC 2-POINT ADJUSTMENT SHAPE MILLING UNIT 1 X 0.35 KW WD 60; also for construction floors PNEUM. 2-POINT ADJUSTMENT RADIUS/CHAMFER MZ 40 MULTI-STAGE SCRAPER UNIT GLUE JOINT SCRAPER BLADE BUFFING UNIT Top pressure: PU rollers instead of standard rollers Release agent spray unit workpiece, leading and trailing edges; edge material Power Control PC 20+ Ele ...

0: 0,4 - 3 mmWorkingpiece thickness from to: 9 - 60 mmTotal length: - mmFeed speed: stufenlos 8 - 12 m/min.total power requirement: 15 kwDimensions (L/W/H): 4.290 x 840 x 1.690 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Polishing unit without spraying at the outlet and after forming of the edges. HOLZ-HER Primus 1436 SE PVC edge banding machine Range: Primus Model: 1436 SE PVC Type: automatic edge banding / banding machine Use: application and finishing of edges on wood panels Power supply: three-phase 400 V on European configurations listed Feed speed: approx. 11 m/min Maximum panel thickness: approx. 50 mm Minimum workpiece width: approx. 60 mm Edge thickness: depending on configuration, up to approx. 8–13 mm in strips and 2–3 mm in rolls Pneumatic pressure: approx. 6 bar Indicative dimensions: L 4.5–4.7 × W 1.02–1.40 × H 1.63–1.65 m Indicative weight: approx. 1,230–1,300 kg Auction-ID: A3-46129-35224

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements!Intuitive operation with the eye-S control and 10 large touchscreen:- HMI Maestro Active Edge- Graphic display of all processing units an ...

Drive feed speed: 10 m/min fixed via heavy-duty conveyor belt. Panel thickness: 6 to 60 mm (depending on the end cutting unit used: max 45 mm with the 1822 group / up to 50-60 mm with the 1918). Edge thickness (in rolls): 0.4 to 3 mm. Edge thickness (in strips/wood strips): Up to 6 mm as standard (option up to 8 mm possible). Minimum panel width: 65 mm. Minimum panel length: 160 mm. Minimum length of edgebanding (edgebands): 350 mm Auction-ID: A1-50215-101

brand: Bi-Matic ; type: Challenge 4.2; year: 2006; serial number: 4905; panel thickness: 40mm; edge tape thickness: 2 mm; Min. workpiece length: 70 mm; throughput: 7 m/min; connection: 400 V; Handbook available: yes; machine weight: 700 kg; size L: 3000 mm; size W: 825 mm; dimensions H: 2300 mm; description: equipped with digital control panel ; 2 x milling unit Auction-ID: A1-50090-2

Code: 0480 Brand: CASADEI INDUSTRIA Model: K 60 PM - CE Standard Automatic edge bander with trimming unit for panels, furniture, furnishings, kitchens, and various - Year 2024 - CE Standard Technical data: Min/max panel height 8–60 Edge thickness10 mm Min panel length 120 mm Min panel width 110 mm Panel feed speed 11 mt/min Panel support roller opening 500 mm Configuration: Infeed trimming unit : 2 diamond cutters diameter 60 mm 64 mm height - PLC-controlled work cycle - Adjustable material removal from 0 to 2 mm with digital display - HF motors, 200 Hz - 12000 rpm - 1,1 Kw each PLC-controlled logic operation - Full machine control - Electronic glue heating control - Automatic temperature standby Infrared lamp for preheating the panel after pre-milling Anti-adhesive liquid spray unit Glue tank - Tank capacity 2 kg - n° 7 electric heating elements Pressure roll ...

Working height 900mmNominal width 1400mmEffective working width 1370mmRolling pressure force max 5kNPassage height max 120mmFeed transport 6-50 m/min stepless/frequency controlledPlate width min 200mmPlate length min 350mmPanel thickness min 3mmGlue hot melt PURApplication rate 40-80g/mDriving power 6kWTempering device 24kW

A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible.

Key data: 5 mm, 10 mm, 3160 mm

EBM edge banding machine KDP 111 SLK - built in 1991 -11.5 kW motor, banding from 0.8-5 mm, verst. Cross-cut knife (roll separation up to 3 mm) Rapid heating basin, HF cross-cut sawing unit, HF flush milling unit, HF chamfer or Radius milling unit, pull-out workpiece support, heated inlet ruler complete with 2-part sound insulation hood and central extraction - Good condition - Length approx. 3,160 mm Depth with roller plate approx. 1,230 mm Workpiece width, min. 90 mm Workpiece thickness, min. 10 mm Workpiece thickness, max. 50 mm Workpiece length, min. 260 mm -Operating instructions available

Brand KDF210 Optimat Manufacturer: Brandt Type: KDF 210 Year: 2014 Machine number: 0-261- 20-7902 Control: Easy Control 10+ with touchless positioning, Start-Stop optic-induct Sensors and LCD Display Control panel: LCD, with 4 lines tekst, ergonomical positioned at infeed -side machine YouTube:

Aggregate equipment: - Joining milling unit 2 x 2.2 Kw 200 Hz - Gluing unit - Cross-cut unit chamfer/straight 2 x 0.35 Kw - Milling unit 2 x 0.55 Kw counter rotation - Grooving unit 1 x 3.5 Kw - Shape milling unit 2 x 0.35 Kw Wd 60 - Profile scraper blade with quick-change heads (R 1 and 2 mm) - Glue joint scraper blade - Buffing unit Other features: - Extended inlet ruler with program adjustment - Program adjustment pressure zone - Motorized adjustment upper pressure - PU top pressure rollers - Automatic edge retraction - Quickmelt application unit - Pneumatic 2-point adjustment caps - Pneumatic adjustment of the scraper blade - Program adjustment side buttons - Pneumatic 2-point adjustment, vertical sensing rollers - Release agent spray unit workpiece - Lubricant spray unit edge material - Cleaning agent spray unit - Axis adjustment for groove milling machi ...

Edge banding machine Brandt Highflex KDF 220 with jointing, corner copying and two Scraper blades. Very well automated. A video of the running machine can be sent on request. Edge thickness roll approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height approx. 10 - 60mm Feed speed approx. 10m/min Noise protection hood Pull-out workpiece support Suction connection 1x120mm, 1x100mm, 3x80mm Easy-touch EC+ control for easy operation of the machine 4 programs can be saved. Machine in high-flex design, highly automated, change of edge from thin edge to thick edge via programs Aggregates: Extended inlet zone Chain conveyor central lubrication, pneumatic manual Quick-change glue basin device, currently one glue basin available Top pressure manual adjustment, PU rollers Infeed ruler manual adjustment with SIKO counter on chip removal Joint milling with slide ...

: 0,4-6 mmWorkingpiece thickness from to: 6-60 mmTotal length: 3516 mmFeed speed: 10 m/min.total power requirement: kwWeight: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.