859 results
similar results found in category dozers and graders
item-No.: 152337071
ES
Digital program
Air table
2 Side tables
Light guards
2 Knives
Complete cleaned, checked and tested
item-No.: 152319135
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures, video and details contact me, please.
Thank You.
item-No.: 152319128
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures, video and details contact me, please.
Thank You.
item-No.: 152319121
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures, video and details contact me, please.
Thank You.
item-No.: 152318318
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures, video and details contact me, please.
Thank You.
item-No.: 152318212
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures, video and details contact me, please.
Thank You.
item-No.: 152318204
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures, video and details contact me, please.
Thank You.
item-No.: 152318198
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures, video and details contact me, please.
Thank You.
item-No.: 152318194
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures, video and details contact me, please.
Thank You.
item-No.: 152318190
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures, video and details contact me, please.
Thank You.
item-No.: 152301716
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank You.
item-No.: 152301713
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank You.
item-No.: 152301712
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank You.
item-No.: 152301711
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank You.
item-No.: 152301682
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank You.
item-No.: 152301681
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank You.
item-No.: 152301680
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank You.
item-No.: 152301679
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank You.
item-No.: 152301678
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank You.
item-No.: 152301676
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank You.
item-No.: 152301674
The machine is fully working, in perfect condition.
No damage, tested. It comes with all available manuals.
For more pictures and details contact me, please.
Thank you.
item-No.: 152251412
PT
Item: Marel IPM3 X300 Slicer and Portion Cutter
Category: Cutter / Slicer
Manufacturer: Marel
Model: IPM3 x300
Year: 2004
Description:
Used Marel IPM3 X300 Slicer and Portion Cutter with:
• Stainless steel slicer and portion cutter machine
• Rotating blade
• Complete w/ laser eye weigher
• Volume scanner m. INW3 x 400
• M Series 3000 controls
Final verification by Marel
This is an ideal machine to cut fish r meat in portions according to a
pre-defined weight and dimension
...
item-No.: 152232960
Type 2176 and 2177 (SCL)
Fully Automatic
3 set of PC/TFT
Prinnect Manager
Heidelberg Workflow
Thermal plate recorder
Resolution 2540 dpi
Plate type: thermal aluminum plates (830 nm)
Max. Plate format: 750 x 680 mm
Plate thickness: 0.15 to 0.3 mm
Productivity: approx. 27 plates/hour
RIP: All software, dongles
Multi Cassette Container Auto loader (50/100 plates)
Thermal plate Processor on line
On line Plate stacker
item-No.: 152197455
4 Colors (Perfecting 2/2,4/0))
IPC system (Integrated Press Control)
API II Control Console
SEMI APC (semi automatic plate change)
IR DRIER BALDWIN
Automatic rollers wash up device FASTWASH
Automatic impression wash up device
Automatic Blanket wash up device
MITSUBISHI DIAMOND DAMPENING SYSTEM
GRAFIX MEGATRONIC S
Original 154 mll turns (first owner)
CIP 3
PRESET
Electronic doble sheet control
Chromed cylinders
NON STOP feeder and delivery
TECHNOTRANS BETA D
AIR PRINT CABINETS
Free of any ...
item-No.: 152079424
NEVER USED
GENSET CATERPILLAR Model: G3512E and auxiliaries.
ENGINE
• Manufacturer: CATERPILLAR | Model: G3512E
• Output: 1048 kW
• Running hours:
- Engine : 0 h. YOM 2011
ALTERNATOR
• Manufacturer: CATERPILLAR 3512 SR4B
• Output: 1250 KVA- 50 Hertz
• Running hours:
- Engine : 0 h. YOM 2011
SCOPE OF SUPPLY
• Genset ( Engine + Generator)
• Water cooling system
• Oil system
• Technical Documentation
• Silencer
• Table cooler
item-No.: 152079417
TRANE CHILLER ABSORPTION MACHINE.
Excellent condition.
Very low running hours and always maintained into a climatized room.
Brand: Trane USA
Model: ABSC 665
YOM: 1999
Power: 1600 Kw
The power of this machine is 1.000.000 Frig Cal/h
C.O.P = 0.70
GENERATOR
Inlet/outlet temperature = 106/90ºC
Flow = 112 Tn/h
Nº of Steps = 4
EVAPORATOR
Inlet/outlet temperature = 12/7ºC
Cooled water Flow = 275 Tn/h
Nº of Steps = 5
ABSORBER/CONDENSATOR
Inlet/outlet temperature condensation water = 30/37ºC
...
item-No.: 152079297
Complete Power plant 3 MW
2 x Jenbacher 612 GS 1998 good condition.
Working hours: 25.292h and 24.525h from new.
Gas natural
Generator stamford 690/400
50Hz
2 x Exhaust exchangers
2 x coolers
2 x Heat exchangers
Complete HT water system (Pumps, exchanger, valves)
Complete LT water system (Pumps, exchanger, valves)
2 x Silincer
2 Gas train
2 Diane blue control
Complete auxiliary control cabinets
2 x Switch breakers
2 x Transformers 690V/15000V
item-No.: 152079288
COMPLETE TILES FACTORY MACHINERY.
The Tiles factory was stopped at the end of 2020. All the machines are
in a good condition and works properly.
The reason of the shutdown was to renew the fleet of machines for new
generation devices able to reduce man power and increase efficiency.
The machines are still ready to work and placed in its original
location, therefore a running test could be done, checking all the
process, in case of your interest.
SCOPE OF SUPPLY:
• 2 PRESSES
• 2 DRYERS
• 2 ENAME ...
item-No.: 152079278
MWM TCG 2016 V16C BIOGAS
Power: 826Kw
YOM: 2011
Working Hours: 51.000h
Overhaul done at 40.000h
Always performanced by MWM technicians following MWM maintenance
steps
Generator: 1300Kva
Voltage: 400V
Scope of supply
Transformer: 400V/20.000V
Control PLC
Gas train
Filtration gas system
HT and LT water System
Oil System
Silencer
Chimeny
item-No.: 152060302
GUASCOR SFGLD-560
Power: 915Kw
Voltage: 0,66Kv.
With 120.000 Working hours, overhaul done with 60.000h. Generator
Siemens.
YOM 1998 and 1999
item-No.: 152060269
Brand motor: JENBACHER
Model: J320GS C
Power : 1.012 KW
YOM: 2004
WH: 75.000h
RPM: 1500rpm
Fuel Gas: Gas Natural
Brand generator: Stamford
Voltage: 690 V
Frequency: 50Hz
Scope of supply:
Gas train
Diane XT
item-No.: 152060254
Brand motor: JENBACHER
Model: J320GS B
Power: 1.003 KW
YOM: 1997
WH: 44.953h from new
RPM: 1500 rpm
Fuel Gas: Natural gas
Brand generator: Stamford very low running hours
Voltage: 400V
Frequency: 50Hz
Included auxiliaries
Gas train
Diane Blue
Cooling system ( Coolers, pumps, valves)
Silincer
item-No.: 152006735
1 COMEZ electronic double needle bed warp knitting machine type
DNB/EL-800-8B,
year 2006,
32 inch (812,8 mm) working width,
gauge GG20, 640/640 latch needles,
8 bars with electronic control,
Stitch density (on both needle beds) 1 - 40 stitches/cm,
with creel with 396 positions,
feeding possibility creel or beam,
machine delivered with 6 warp beams,
with COMEZ Data Control 3 and all it's memory cards (setup, pattern
and machine state),
Machine supplied with COMEZ SystemWin software and COMEZ Draw ...
item-No.: 152006721
1 MATHIS yarn or ribbons sizing / finishing machine type FIOMAT-B,
Pilot range for continuous finishing / sizing of up to 48
yarns.
machine is also suitable for sizing and finishing of ribbons and
tapes,
made of stainless steel,
two unwinding axis for 24 yarn spools each,
yarns are guided by combs, with slight back-and-forth movement,
1 liter immersion trough (electric heating up to 95 ºC) with
removable immersion rollers (for cleaning),
pneumatic actuated impregnation / squeezing padder, roller width 115
...
item-No.: 152006719
1 POLYTEX pinking machine type ZH (Zigzag cutting)
knife width 500 mm,
serrated knife,
stroke 50 mm,
table size 505 x 945 mm,
power driven swatch and sample cutting machine,
precise and accurate thanks to right angle guide with millimeter
graduation,
exchange of knife is effortless and fast,
motor 0,37 kW
machine delivered with 2 new cutting boards (one to be used and one as
spare)
item-No.: 152006716
1 UNITECH stenter type Redevo 4DF2 K2200,
year 2006,
working width up to 220 cm,
composed of:
high entry with CORINO spreading and centering device type FLC4,
UNITECH padder face roller width 240 cm,
UNITECH coating head type Coat 220 with face roller width 240 cm,
stenter entry with 3-finger uncrawlers and IR edge feelers,
overfeeding,
vertical combined pin and clip chain with 4 m long entry field,
steaming,
selvedge glueing,
IR selvedge pre-drying before entering the drying fields,
2 gas heated field ...
item-No.: 152006715
USTER type MDTA3S Variante SF micro dust and trash analyser with USTER
ROTORRING 3 sliver former, year 1993. In this unit tufts get opened up
to single fibres, are cleaned, blended and formed to a sliver.
USTER type QuickSpin QSS-1000S Variante SF, year 1993, open end or
rotor spinning unit, where the sliver is spun into Quickspin model
yarn. This unit spins the sliver into yarn in a Lab Set-up, and also
helps for quick comparable test results of yarn as well as the cotton
used.
item-No.: 152006713
1 USTER type HVI SPECTRUM (High Volume Instrument), year 1999, with
MICRONAIRE and METTLER TOLEDO scale type PB302-ZAG, this unit checks
the raw cotton parameters like Length/Strength, Maturity, Micronaire,
color/trash and Moisture.
item-No.: 152006710
2 ELECTROJET roving frames type ROVEMATIC ADR, year 2003 and 2004,
each with 128 spindles, each with ELECTROJET travelling blower
2 ELECTROJET roving frames type ROVEMATIC ADR, year 2009,
each with 144 spindles, each with ELECTROJET travelling blower
item-No.: 151859656
With Plate Processor Interplate
Max. plate size 72 cm x 104 cm
Complete operating system.
item-No.: 151826788
Technical data
Manufacturer: HARTFORD
Model: VMC 1600A
Year: 2.000
Control unit: MITSUBISHI MC64
Dimensions
Table dimensions: 1700 x 750 mm.
T-Slot (Size x Number x Pitch): 18 x 5 x 130 mm.
Max. Table Load: 1.500 kg.
Travel
X axis traverse: 1600 mm.
Y axis traverse: 820 mm.
Z axis traverse: 620 mm.
Spindle
Taper: BT50
Distance from Spindle end to Table: 188 – 808 mm.
Distance from Spindle center to Column: 800 mm.
Spindle speed (Gear type): 40 – 4000 rpm.
Max. Tool Weight: 15 kg.
...
item-No.: 151783884
Technical data
Manufacturer: TAKUMI
Model: V8A
Year: 1.997
Control unit: Heideinhain TNC 410
Serial Number: F8036
Dimensions
Table size: 1.000 x 510 mm.
Tee slots (W x Nº) : 18 x 5 mm.
Table load (maximum): 600 kg.
Travel
X axis traverse (telescopic cover new): 810 mm.
Y axis traverse (telescopic cover new): 510 mm.
Z axis traverse: 560 mm.
Spindle nose to table surface: 150 – 710 mm
Spindle nose to column surface: 570 mm.
Spindle
Taper: BT40
Spindle speed: 6000 r.p.m.
Feedrates
Cut ...
item-No.: 151783776
Datos Técnicos
Cono / Taper: ISO B40
Nº de serie: 0118
Control numérico : Heidenhain ITNC 530
Dimensiones
Dimensiones mesa: 910 X 500 mm.
Peso máx. admitido: 1.100 kg.
Recorridos
Recorrido longitudinal X: 800 mm.
Recorrido transversal Y: 500 mm.
Recorrido vertical Z: 540 mm.
Husillo
Revoluciones: (40%ED, S6) 16.000 rpm., 14.75 Kw., 94 Nm.
AVANCES
Avance de trabajo – Avance Rápido X, Y 16 – 36 m/min.
Avance de trabajo – Avance Rápido Z: 16 – 24 m/min.
Peso y dimensiones
Pe ...
item-No.: 151741430
CA
KOMORI L440+LX(72 x 103cm), Age c.1997, serial no.2163, circa 135
million, PQC, Komorimatic dampening, APC, AMR
(automatic make ready), KHS, Automatic Baldwin blanket wash system,
Jac de Vries IR dryer, Steel plate in feed and
delivery, Technotrans Beta C Combined Refig/Ink Temp Control,
Technotrans coating pump/heater, Anti static in
feeder and delivery, Weko AP 260 powder spray, Tresu Coating unit,
Electronic acoustic sidelay control, Non stop
feeder/delivery, available immediately
item-No.: 151640871
CD BOX MANUFACTURING LINE (year 2008)
Composed of:
- NETSTAL Synergy 2400?1700 CD BOX LINE (4+4) (year 2008)
- ILSEMANN SKM06 system SMB 642 SH1 Robot (year 2007) + Periphery for
4+4 CD automation: 4+4 CD removal with assembly and closing station +
stacking device with foil bundler. Cycle time 5,5 sec. Take out time
0,8 sec.
- ADVALTECH 4+4 cavity stack / 4-cavity injection mold for Jewel Trays
crystal clear/colored (ps)
-
On the NETSTAL SYNERGY 2400-1700 injection molding machine, CD Boxes
are prod ...
item-No.: 151545285
KOMPAC III Dampening
+ VERSION
Extra COMPRESSOR ON FEEDER
Perfecting 1/1,2/0
NUMBERING AND PERFORATING UNIT
SUPERBLUE on Transfer Drums
Fully REFURBISHED by ICD five years ago (incl. new rollers and
bearings)
Free of any damages on cylinders or gears
item-No.: 151527694
Digital program
Central table with CNS
2 Sides tables
Light guards
2 Knives
item-No.: 151462282
Filling Line for Still Water Krones PET 42 000 bph
This complete still water bottling line in PET bottles which was
initially delivered and installed in 2011. In 2020 it was dismantled
professionally and now in air-conditioned warehouse. The line is a
complete PET water bottling line from blow moulder to pallet wrapper.
The line nominal capacity is 42 000 bph in 500 ml PET and was
previously running 500ml PET bottles with 8.7 gram preforms.
Technical characteristics
Manufacturer Krones AG
Manufact ...
item-No.: 151387615
Perfecting 2/3 - 5/0
PPL: Semi-Automatic Plate Change
RCI: Remote Control Desk
Colorpilot Densitometer
Rolandmatic Dampening
Roland Seccomatic IR/TL Dryer
Technotrans Cooling Device
Grafix: Powder Sprayer
Automatic Washing Devices
Preset: Automatic Adjustment of Size
Airglide Delivery
item-No.: 151372699
4 Colors.
Straight
RCI
ALCOHOL DAMPENING with cooling,
BACHER register clamps
High pile delivery.
Powder spray
IR DRIER
