We are pleased to offer:
Watkiss Power Square 200 Year 2011
Back Booklet Maker
Paper Size/Weight:
Min Input : 7.9” x 7.9” (200 x 200mm)
Max Input : 13.3” x 19.6” (340 x 500mm)
Min Rotation: 8.2” x 7.9” (207x200mm) Max Rotation: 12.5” x
8.9” (320x227mm) 18 lbs (70 gsm) – 32 lbs index (250gsm)
Output Tray Capacity:
35 books (20 sheets of 80gsm bond paper with 2 stitches)
Book Thickness:
Min Set: 2 sheets
Max Set: 50 sheets 80gsm 0.2” (5mm)
Max Book: 200 pages 80gsm 0.4” (10mm)
Inp ...
Used KBA Rapida 72K printing machine. Very good condition. YOM 1993.
Used for the own needs of a tea producer for printing cardboard boxes.
B2 format (alcohol). Machine for folding metal sheet.
Used RGNF-30B Tube Filling and Sealing Machine
? Widely used in pharmaceutical?food?cosmetic and daily chemical
industries to fill ointment or viscous fluid materials into plastic
tube or laminated tube. And then seal the tube tails? trim the tails
and print code on tubes automatically.
? Fulfill tube feeding, marking identification, filling, hot air
sealing, trimming, code printing and finished product ejection
through an automatic control system.
? Adopts touch screen and PLC control system. Easy to oper ...
Used continuous evaporator from Spomasz, model CWA19A for fudge, milk
masses and other food products requiring vacuum. The CMA device is a
mixer for pre-mixing caramel masses and fillings.
Used sugar agglomeration line made by Olhmann. New 1996. Capacity ca.
600 kg of agglomerated sugar per shift.
One batch = 100 kg and lasts 40 minutes.
Short operating principle: ground sugar is thrown inside the
agglomerator, at the bottom there is a sieve through which hot air
from the steam exchanger throws the product upwards, which with the
sprayed water causes the formation of very fine balls. The line
requires process steam, an input of 8 bar.
Two used Bihler GRM80 multislide machines currently undergoing
refurbishment
in our UK workshop. These are standard machines that will be fitted
with 30 ton press unit, 5x forming slides & new strip straighteners.
Both machines will be equipped with NEW Bihler BCR control systems
(RETROFIT SYSTEM) with the possibility of a remote connection to the
Bihler Service Department if so required. New hydraulic and pneumatic
systems,new roller chain & clutch & brake combinations will be
installed.
...
SEMI-AUTOMATIC SCREENCHANGER 300 mm diam.
C45 steel body, hardened and ground C45 steel sliding plate. Internal
spoke torpedo.
Teflon sealing ring, resistant to high temperatures.
The brozines in contact with the plate are in special Cu Al Fe NI4
Alloy.
Complete with flat, collar and candle resistors.
Electric trunking service trolley.
Prepared for connection for Dynisco pressure control.
Accident prevention protections with safety interlocked with the
control button.
Diam.300 mm screens
Hydraulic pack
...
Heißluftdämpfer / Konvektomat/ Combi-Dämpfer / Kombidämpfer mit
Dampf und Heißluft für 10 GN1/1 Quer (530x335mm). Auf Wunsch auch
mit Unterschrank mit Türen; rechte Seite 10 Einschübe für GN2/1;
linke Seite 10 Einschübe für GN1/1; Extrapreis für Unterschrank mit
GN1/1-Einschüben: 450Euro
Ser. Nr. : V1035630 MNR 492
elek. Spannung : 380-415V
elek. Leistung : 15-18kW
CATALOG NUMBER 6114
TECHNICAL DATA
- 800x1000mm loading hopper inlet
- rotor working width 800mm
- pump motor 0.75kW
- 15kW main engine
- number of knives 21 pcs
- dimensions of the knives 30x30mm
- 0.8x10mm sieve
- pressure drawer
- electric reverse
- 2 × 1.1kW discharge augers
- dimensions length / width / height 2460x1800x2250mm
- weight 1660 kg
- German production
- reverse
- pressure drawer
- unpainted
- very good condition
- used chipper
Net price: 69 900 PLN
Net price: 16069 euros d ...
STIEGLER U 900 W-SBT/L WICKET BAG BLOCKED BAGS
Y 1994
Material type LDPE; LLDPE (Borstar); HDPE; pp Cast
Foil type sleeve, half sleeve, foil, bottom gusset, fold; perforatin
Bag type punch, blocking; longitudinally sealing; adhesive tape
Unwinder width max.1.350 mm
Sealing type welding strip 1,4 mm
Width of the sealing bar 950 mm
Speed of Machine min. 40 pcs/min – max. 150 pcs/min
Bag width min. – 120 mm – max. – 670 mm
Thickness min. – 22 my – max. – 150 my
Bag height min. – 250 mm ...
STIEGLER ST-1/3 900 W-L WICKET BAG BLOCKED BAGS
Year 1997
Material type LDPE; LLDPE (Borstar); HDPE; pp Cast
Foil type sleeve, half sleeve, foil, bottom gusset, fold; perforatin
Bag type punch, blocking; longitudinally sealing; adhesive tape
Unwinder width max.1.500 mm
Sealing type welding strip 1,4 mm
Width of the sealing bar 950 mm
Speed of Machine min. 30 pcs/min – max. 250 pcs/min
Bag width min. – 120 mm – max. – 605 mm
Thickness min. – 15 my – max. – 150 my
Bag height min. – 250 mm ...
W&H POLYREX SF 3708
Year 1999
Material type LDPE; LLDPE (Borstar); HDPE
Foil type sleeve, half sleeve, foil, bottom-top gusset
Bag type punch, sealing loop handle; longitudinally sealing, hot air
(top folded,upper swich)
Unwinder width max.1.400 mm
Sealing type shoper – teflon sealing
Width of the sealing bar 800 mm
Speed of Machine min. 60 pcs/min, max. 150 pcs/min
Bag width min. 250 mm, max. – 720 mm
Thickness min. 25 my, max. – 100 my
Bag height min. 250 mm – max. – 750 mm
Botttm gusset: ...
Laveuse de bacs europe LC 200
Production : 20 à 25 unités / h
Puissance de la pompe : 15 kW
Filtre rotatif autonettoyant
Étapes : Prélavage-Lavage-Rinçage-Désinfection
Various agricultural equipment
Agricultural equipment and vehicles for sale at the online auction on
Tuesday 11 May 2021.
Included:
- Mobile diesel tank
Brand: Class
Model: Select
Notes: Fuel tank with holes. To be scrapped
- Bridge
Brand: Ravaglioli
Model: KP 142
Notes: Car deck to be scrapped because it is not up to standard
- External diesel tank
Brand: High
Model: Tank 626
Notes: 1700 liter diesel tank with non-compliant containment tank
(insufficient basin)
- Isagri GPS
Notes: Canned Terrain GP ...
CryoCab MED Kältesauna Cabine Cryotherapie Eistonne Kryosauna
Kältekammer
gebraucht, aus Geschäftsauflösung
Model: Cabine Cryotherapie
Type: CryoCab
Baujahr: 2018
240 VAC 50hz 850W 16A
Gewicht: 240 kg
letzte Einsatz in einer Physiotherapiepraxis
Medizinprodukt zertifiziert
Anlage vom Lieferanten / Medizintechniker demontiert
Ohne Stickstoffbehälter / Stickstofftank
Angaben ohne Gewähr
Angaben, Informationen und Technische Daten vom Hersteller
Um etwaigen Missverständnissen bezüglich ...
Code: 0379
Brand: COMIL BIESSE
Model: VEGA
Vertical clamp desk for drawers with dowel connector
Technical data:
Working length min/max mm 290/1300
Working width min/max mm 260/600
Useful height max mm 180
Max vertical pressing capacity approx. 800 kg
Max horizontal pressing capacity approx. 400 kg
Overall dimensions: mm 2500 x 950 x 1920 h
Weight kg 1400
A VENDRE:
Equilibreuse HOFMANN HL 16 RE
poids de la pièce
100 kilogrammes
longueur de la pièce
570 millimètre
diamètre
650 millimètres
puissance totale requise
1,1 kW
poids de la machine env.
845 kilogrammes
dimensions de la machine env.
1770 x 900 x 1450 millimètre
poids de rotation
100 kilogrammes
Unité de contrôle
conventionnel
Machine en très bon état
Anglais:
Équilibreuse HOFMANN HL 16 RE
poids de la pièce
100 kilogrammes
longueur de la pièce
570 mm
diamètre
650 mm
...
Caterpillar 3406C, Power 365kva, YOM 2008, excellent condition load
tested, Availablie in stock for sale.
For any Requirement for Diesel and HFO and Gas generator sets Contact
by email at imran2 at powerpointeng.com. or contact by inbox massege
only.
Right Way Power Solution Provides complete Solution of Power
Generation and Distribution Products for Caterpillar Cummins Perkins
Jenbacher Waukesha Wartsila MAN MWM Deutz Heinzman Woodward GAC
Deepsea Comap DEIF ENKO EMKO DATAKOM and Manu other brands products
...
Diesel Power Plant 6 MW/50 Hz with Wartsila 4 x 9L20 Oil Cube Modules
- NEVER INSTALLED
This power plant consists of four Wartsila Oil Cube concept electric
power generating units, each equipped with one 1.52 MW Wartsila 9L20
generating set. These units are designed to run with light diesel oil
fuel (LFO) and heavy diesel oil (HFO) up to 350 cSt viscosity. Each
1.5 MW unit contains two 40-feet container, one accommodating
generating sets, charge air system and a module with heat exchanger.
The other container ho ...
Brand New DOOSAN– MAN Authorized / Made In Korea, Power 1881kw,
Engine model 9L21/31, Engine YOM 2013, Can be Run on Diesel or HFO
Both fuel system, run 0.0 hour.
For any Requirement for Diesel and HFO and Gas generator sets Contact
by email at rightwayps at Gmail . com. or contact by inbox massege
only.
Right Way Power Solution Provides complete Solution of Power
Generation and Distribution Products for Caterpillar Cummins Perkins
Jenbacher Waukesha Wartsila MAN MWM Deutz Heinzman Woodward GAC
Deepsea Coma ...
Nigata Japan, Power 1600 kw, Engine model 8L26 HX, Engine YOM 2008,
Run on Diesel / HFO Both fuel system Genset, only run 12 hour since
new. Like new condition unit.
For any Requirement for Diesel and HFO and Gas generator sets Contact
by email at imran2 at powerpointeng.com. or contact by inbox massege
only.
Right Way Power Solution Provides complete Solution of Power
Generation and Distribution Products for Caterpillar Cummins Perkins
Jenbacher Waukesha Wartsila MAN MWM Deutz Heinzman Woodward GAC
Deepsea ...
WE CAN OFFER 3 X DAIHATSU Diesel / HFO Generator set, Engine MODEL
8DL-28, Power 1500kw / 1875KVA, YOM 1996, Run around 30k, Perfect
working condition Genset.
For any serious Requirement for Diesel and HFO and Gas generator sets
Contact by email at imran2 at powerpointeng.com. or contact by massege
inbox inquiry only.
Right Way Power Solution Provides complete Solution of Power
Generation and Distribution Products for Caterpillar Cummins Perkins
Jenbacher Waukesha Wartsila MAN MWM Deutz Heinzman Woodward GAC
...
Code: 0377
Brand: MELLI - ITALIA
Model: M 87
Automatic Rotary table wrapping machine for the wrapping with stretch
film of pallets, boxes, cabinets, and various materials
Technical data:
Table diameter mm 1500
Max. working height mm 2200
Rotation motor Hp 1 - Rpm 1400
Top an bottom wrapping rounds selector
Coil height mm 450
Roll connection diameter mm 70
Overall dimensions: mm 2300 x 1500 x 2400 h
Weight kg
Gas Power Plant 4.5 MWe CHP with MWM TCG 2032V16 generating set
Very good condition, complete MWM 4.5 MW gas engine generating with 18
bar steam boiler and other auxiliaries. This equipment was installed
in year 2014 and having only 8900 total operating hours. MWM engine
is modern, high efficiency 16-cylider, 1000 rpm piston engine which is
designed for base load operation. Gas fuel can vary from natural gas,
landfill gas, sewage gas, mine gas, coke oven gas or biogases. This
engine has log maintenance inter ...
Code: 0375
Brand: OMEC
Model: F8 - Ce Standard
Automatic dovetailing machine for dovetail joints on drawers and
various furniture elements
The machine is equipped with a unit of 8 spindles with equal mill
cutters that allow the production of indents of different heights.
Technical data:
No. 8 spindles
Spindle revolutions /min 17,000
Maximum working width mm 400
Distance between centres of indents mm 25
Drawers production 120 / hour
Power Kw 7,5
Working pressure 6 atm
Overall dimensions: m ...
New Cummins Genset, Engine 6CTAA8.3, Power 175kva, Alternator Mecc
alte Italy, DSE UK Control panel system, Volts: 400, Hz : 50, PF 0.8,
Available in stock For Sale.
For any serious Requirement for Diesel and HFO and Gas generator sets
Contact by email at imran2 at powerpointeng or contact by inbox
massege only.
Right Way Power Solution Provides complete Solution of Power
Generation and Distribution Products for Caterpillar Cummins Perkins
Jenbacher Waukesha Wartsila MAN MWM Deutz Heinzman Woodward GAC
Deepse ...
John Deere diesel generator, Power 200kw, Alternator Leroy Somer
France, YOM 2007, DSE UK Control panel system, Volts: 400, Hz : 50, PF
0.8, Available in stock For Sale.
For any serious Requirement for Diesel and HFO and Gas generator sets
Contact by email at
imran2 at powerpointeng or contact by inbox massege.
Right Way Power Solution Provides complete Solution of Power
Generation and Distribution Products for Caterpillar Cummins Perkins
Jenbacher Waukesha Wartsila MAN MWM Deutz Heinzman Woodward GAC
Deep ...
Code: 0372
Brand: PAOLONI
Model: TT 30 - CE Standard
Saw spindle moulder with tilting blade and scoring unit for cutting
and milling panels, customised furnishings, furniture, fittings,
stands, wooden and aluminium frames, composite materials and various
materials - Ce Standard
Technical data:
Cutting length mm 3200
Max. blade diameter mm 400
Max height of cut with blade 400 mm 135
Blade inclination 0-45 degrees
Speed rpm 3000/4500/6000
Blade motor power Hp 5,5
Scoring unit: diameter mm 125 - motor ...
Nipper - Double action hydraulic nipping press
Splek (Sperr & Lechner)
Model SLFIIA-200
Year 200
Nipping width 420 mm
Thickness up to 90 mm adjustable
Pressure up to 3.200 kg
Available direct
cup filling machine
can be used for lemon, cream, milk, other food products
portions 7g/10 g/15g in sets of 2 x 10 pcs / takt
the number of measures: 30 / minute (machine performance 36,000 cups /
hour)
9,000 kg weight of the machine
dimensions of the machine: length 12000 x width 1000 x height 3500
dimensions of the electrical cabinet 4500 x 950 x 2000
FOR SALE LASER CUTTING CENTER AMADA type FO 4222 NT M2 CI
- FANUC AF 4000 IC Max continuous power of the CW - 4000 Watt
- Fleed area X axis 4200 mm
- Y axis 2200 mm
- Z axis 200 mm
- Max board weight 1500 kg Max, material thickness Constr steel /ST
1203/ Stainless steel /1. 4301/ 25 mm 15mm 28mm 20mm
OTHER ACCESSORIES
Rotation of CHUCK INDEX diameter of round pipe 115 mm
Diameter of sguare pipe 70 mm wall thickness 1 - 9 mm
Working scope 4220 mm 2 . x - conveyor culv ...
OVERVIEW
Brand: CHARMILLES
Model: ROBOFIL 290 P
Application Type: EDM
Machine Type: Erosion machines
Availability: IMMEDIATELY
Production Year: 1999
Location: Spain
Origin Country: Spain
Production Hours: 16000
MAIN DRIVE
Number of axis: 5
MOVEMENT
X-Axis Movement: 400 MM
Y-Axis Movement: 250 MM
Z-Axis Movement: 200 MM
V-Axis Movement: 250 MM
U-Axis Movement: 400 MM
WORKPIECE
Workpiece weight: 500 KG
TABLE
Outer length: 850 MM
Outer width: 500 MM
MACHINE BENEFITS
Technical machin ...
Cast iron bed - No 2
Length: 6000 mm
Width: 1500 mm
Thickness: 350 mm
5 T-slots
T-slots dimensions: 60 x 36 mm - Height 60 mm
Possibility to assemble bed No 1 + bed No. 2
to get an overhall R447921 surface of 6000 x 3000 mm
Weight: approx 7 T
Cast iron bed - No 1
Length: 6000 mm
Width: 1500 mm
Thickness: 350 mm
5 T-slots
T-slots dimensions: 60 x 36 mm - Height 60 mm
Possibility to assemble bed No 1 + bed No. 2
to get an overhall surface of 6000 x 3000 mm
Weight: approx 7 T
Cast iron bed - No 2
Length: 3000 mm
Width: 1750 mm
Thickness: 350 mm
7 T-slots
T-slots dimensions: 60 x 36 mm - Heigth 60 mm
Possibility to assemble bed No 1 + bed No. 2
to get an overhall surface of 3000 x 3500 mm
or an overhall surface of 6000 x 1750 mm
Weight: approx 5 T
Cast iron bed - No 1
Length: 3000 mm
Width: 1750 mm
Thickness: 350 mm
7 T-slots
T-slots dimensions: 60 x 36 mm - Heigth 60 mm
Possibility to assemble bed No 1 + bed No. 2
to get an overhall surface of 3000 x 3500 mm
or an overhall surface of 6000 x 1750 mm
Weight: approx 5 T
We have complete Barmag POY spinning lines, YOM 2004, 2 kinds of
widers, ACW 4T 1200/8, ACW 1500/10. each model 48 pos. available very
good condition. Serious buyers contact us.
Fiat Panda and Ford Transit van
ACCIDENTED CARS
• FIAT PANDA CAR WITH PLATE CY093CK
Reference in MTARG1 appraisal
• FORD TRANSIT CONNECT VAN WITH PLATE DW327NG
Reference in MTARG2 appraisal
Notes: Vehicles to be subjected to routine maintenance and overhaul
From next April 26, 2021, aluminum die-casting and production movable
goods will be on sale at the online auction.
In total 47 lots will be on sale including:
- 6 die-casting islands with Idra and Italpresse brand presses
- equipment and work bench ...
You didn't find your wanted machine?send wanted inquiryto all dealers (no registration necessary)