24 results
item-No.: 144667107
ES
Año: 2010
Características:
Maquina sleever con túnel de vapor.
item-No.: 144663065
AUTOMATIC LABELLER FOR PALLETS
Characteristics:
Pallet labeling machine in very good condition.
item-No.: 144663000
Year: 2012
Condition: Very good
Characteristics:
STEAM TUNNEL SLEEVER
DIMENSIONS: 2500 mm (height)
item-No.: 131484248
A labeling machine or label applicator is basically composed of a
labeling head with a system that detaches the label from the support
paper and transfers it to the product.
This system is widely used in production lines of different sectors,
increasing productivity and minimizing costs and operator time.
Year: 2007; 2008
item-No.: 131250830
Characteristics:
KRONES labeller type Contiroll, with wrapping coil type ROLL.
The machine works according to a simple but very effective principle
that applies the labels directly in the containers, without using
gluing palettes. This labeling process is economical and results in
perfectly decorated packaging. The containers are precisely fixed
between the centering tulip and the container holder.
The different executions allow an exact labeling from the range of low
to high yields.
Speed: 12.000 b/h
Format: ...
item-No.: 130882669
Labeler bar codes for packs of 4 or 6 bottels in plastic or glass.
item-No.: 129639009
item-No.: 127802845
item-No.: 127660659
Adhesive automatic labeller of a head.
Brand: Eticopack, Coop.
Overall dimensions: length 2, 700 mm, width 1.250 mm, 1300 mm high
item-No.: 127465157
Machine fully automatic wrap-around can hot glue.
item-No.: 125579887
LABELLER
Number stations gluing 2, label + against
Pallet number altogether tagger 4
Number stations transfer 4 cylinder
Maximum speed rated at 14,000 bph
STAMP TAX BANDING MACHINE
System of complete seal in glass by means of cold cola bottle neck
item-No.: 125128198
Kosme 720 9T S2 E2, 2009, L05079001, Kosme Self Adhesive
Labeller, 2 station rotary labeller, front and back label
application,
Nominal speed 9,000bph. Includes documentation The label
maximum Height is 190mm. Label length is relative to bottle
diameter. Currently set up to run body and back label on glass
bottles
The labeller was originally formatted for 5 different bottle types as
listed below:
74.6mm Diameter x 283.2mm Height ±Round Bottle
73.6mm Diameter x 300.4mm Height ±Round Bottle
74.1mm Diamete ...
item-No.: 125128182
INKJET CODER DOMINIO AS PLUS
http://www.inter-maquinasaguilar.com/en/productos/codificadores-tinta/
codificador-domino-serie-plus
item-No.: 125128180
item-No.: 125128172
item-No.: 122136206
Encoder Domino.
Model: Plus
No. series: W2A11408
220 volts, 2 amps
Dimensions: 300mm, 550mm length, 730mm high. Weight 50 kg.
item-No.: 122020910
Case sealers Soco System.
Model T - 10
No. machine: 498-2006
Year: 28/2006
Voltage: 3x415V
Frequency: 50 Hz
1.5 A
Dimensions: width belt rollers 600mm, long tape rolls 900mm, 800mm,
1000mm length, 1610mm height.
item-No.: 117193628
Self adhesive KOSME
Model: EXTRA ADHESIVE 720 6T S2 E2
Hot melt
Year of manufacture: 2000
2 Stations: body labels, back labels
Clock-wise: Right-Left
6 Saddles
Speed: 6.000 b/h
Approx. Size: 2.5 x2 x2m
item-No.: 112954344
Speed: 8-10.000 B/H
Format: 37.5 cl y 75 cl
Condition: Good conditions
Characteristics:
Labeling machine with 2 stations
Cold glue
Plates: 8
Speed: 8-10.000 B/H
Current format: 37.5 cl y 75 cl.
item-No.: 110943830
Characteristics:
Bottle rack diameter 720 mm
Number of plates: 12
Number of gluing stations 2, label + counter
Number Palettes in Set Tagger 4
Number of transfer cylinder stations 4
Maximum speed 14,000 b / h
Inspector Krones CHECKMAT type 707 for labels and capsule
item-No.: 68768207
Labeler Coder DOMINO
Type: PCU IV-ACC
Serial number: 59633
Year: 2009
item-No.: 68757934
Brand: GYM Internacional, S.A
Model: BASE
Number: 220
Year: 2004
Condition: very good
Characteristics:
Autoadhesive labeller BASE model. One head.
item-No.: 38279066
Number: 1761
- 2 stations labeling machine for self-adhesive label.
item-No.: 5664152
PT
Machine Specification:
A Substantial Machine Body, constructed from a robust aluminum
extruded base frame with integral frame members that in turn provide
the mounting for various auxiliary modules. The base has a stainless
steel top cover and end covers that enclose the base frame. The base
frame also includes four adjustable feet.
A 2575mm Conveyor Assembly, constructed from a stainless steel main
section including separate end sections and includes the following
features.
- A single belt conveyor includin ...
