thermoforming machines used for sale (71)

BVM Compacta 5022 EGS Sleever:, Indeed flighted Conveyor length 1200 mm (approx.), BVM grouping System:, For production of multipacks of unto 4 Stacks side by side, consisting of:, Transport conveyor, width 400 mm, length 1000 mm (approx.), 1 Rake on top with mechanical positioning via frequency converter in servo mode, Including pneumatic flap for producing multipacks of 2, 3 or 4 Stacks, The transfer of single Stacks is also possible., Max. length of Stacks 630 mm, BVM fully enclosing packing/ Sleeving machine Compacta 5022. Fully automatic, fed by conveyor belt with photocell control including 100 format data storage locations, Technical Data:, Service side standard : left had side, Sealing : 500 mm, Passing Height : 220 mm (standard), Belt width indeed/ outfield conveyor : 400 mm, Caacity : unto 120 cycles/ min , Length sealing : continuously working, Film width max. : 650/ 650 mm ce ...

carrying capacity: 900 kgweight of the machine ca.: 119 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEYHMÜLLER CBU-ISO 10332 automatic COMBIPACK Machine for the application of Pre-Printed Blanks onto Round Cup/ Rectangular Container Walls,, Age 2017 only used for ca. 8000 hrs., The Combipack Thin-Walled Cup/ Containers (Products) use up to 60% less material than conventional thermoformed Products, the applied paper Blanks provide stability & strength. The Paper Blanks can be easily separated for recycling purposes., Machine Consisting of:-, • Elevator Tray Feeder, • Cup/ Container In-Feed Conveyor, • Universal 4 x Screw Denester, • Indexing Turret with 8 x Mandrels, • Turret Indexes to:, Cup/ Container infeed Station, Blank Feeder Station, Glue application Station, Blank Forming/ Folding Station, Glue Drying Station, Cup/ Container Bottom Labelling Position, Counter/ Stacker Station, • Pre-printed Blanks horizontal accumulator In-Feed Conveyor to:, • Vertically stacked B ...

Type Of Laminator: Solvent and Solventless // Working Width: 1315 mm

Type Of Laminator: Solventless // Working Width: 1315 mm

Material : ABS. PST, PC, PETG, PMMA // Forming Area (Vxh): 1100x900

Material : PP // Forming Area (Vxh): 825 x 675 mm

Material : PS, PP, PE, PVC, A-PET // Forming Area (Vxh): 535 x 390 mm

Forming Area (Vxh): 704x515

Material : PP, PS, APET, CPET, PLA, OPS, EPS, PVC // Forming Area (Vxh): 780x570

Type Of Laminator: Solventless // Working Width: 1315 mm

1 x Used ILLIG RDM70K PP-Mold for 5-Cavity, Strawberry Containers 174 x 103 x 90 mm age December 2005. Product drawing is attached.

1 x Used ILLIG RDM70K PP-Mold for 8-Cavity, Rectangular Containers 145.5 x 65.3 x 41 mm age December 2007. Product drawing is attached.

1 x Used Wrapping Machine WM FC780 E, age 2005, Unwinder:, Single Reel holder, Max. reel diameter 1,200 mm, Thermoforming machine:, Max. tool size 780 x 570 mm, Max. tool size with pneumatic clamp frame 750 x 570 mm, Max. positive depth 130 mm, Max. negative depth 130 mm, Max. sheet width 810 mm, Max. sheet indexing 570 mm, Max. HIPS sheet thickness 1.8 mm, Max. EPS sheet thickness 3 mm, Max. platen stroke (upper – lower) 150 mm, Heater length 1,775 mm, Clamping force DaN 20,000, Upper heating, installed power Kw 41, Lower heating, installed power Kw 41, Vacuum pump motor Kw 2,2, Platen driving servo motor (each) Kw 7.5, Sheet index servomotor Kw 11, Dry cycle speed 45 Cycles/ min, Processing air pressure 7 bar, Water consumption at + 12° C. 60 L/ min, Air consumption at 7 bar 50 L/ cycle, Cutting Press:, Max. cut dimensions 760 x 550 mm, Platen clamping force DaN 60,000, Upper platen ...

HEAT PRESS ORMA C4 25/12 CE Useful heated surface price in stainless steel mm. 2500x1300 Press opening mm. 470 220 V 3 HP The press was used for gluing sandwich panels, consisting of: . carbon fabric with epoxy resin; . PVC or Nomex core (honeycomb); . Carbon fabric with epoxy resin. 1) Power Requirement (kW) 13.5 2) Total force (or pressure through the plates) 20 tons 3) Maximum operating temperature 90° 4) Status of the floors EXCELLENT CONDITION Press used to process carbon fiber for printing carbon fiber sandwich panels, with epoxy resin and Nomex or PVC cores.

: 250 m³/min: 200 mbartotal power requirement: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

carrying capacity: 1600 kgnumber of suction cups: 10 weight of the machine ca.: 180 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1.0 pcs. Vertical press for use: SMC (Sheet Molding Compound) Manufacturer: LAUFFER Type: PRKP120 Year of Make: 1972 Pressing force: 120 tons Table; 1,200 x 1,000 mm Additional heated Table surface: 800 x 800 mm Installation height: 810 mm Stroke: 790 mm Opening: 1,600 mm

Age: 1994, For sale outside Europe, Consisting of:, Automatic Elevator Tray-feeder Cross Conveyor to main Print unit Universal screw Denester CUBITRON Corona Pretreatment System 8-mandrel Indexing Turret, with Mandrel Holders for Cups 6 x individually hinged dry-offset Print Heads Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm 2 x Oscillating rollers 2 x Idler Rollers 1 x Ink Transfer roller (Ductor Roller) 1 x Ink Fountain, Ductor Rollers water cooled Ink Washing System on Print Heads UVITERNO Dual Lamp UV Curing-On-Mandrel Dual Belt Take-off with Air Assist Short conveyor to counter Stacker station Return Elevator Tray Feeder, Printer in production with Yogurt Cups at 444 Cups/ min Siemens SIMATIC S5 PLC Controls V. Good Production Condition, can be inspected ...

Used ILLIG STAL80 Trim Press, age 2004:-, Technical data ILLIG STAL 80 :, Punching table area max. 1000 x 510 mm, Material width max. 800 mm, Infeed length 20 - 400 mm, Stroke height 200 mm, Mold height 272 mm, Part height (positive and negative) max. 100 mm, Number of strokes (infinitely variable) 25 - 130 /min, Trimmed Parts are stacked through the Punch Tool, The Skeletal Waste is fed directly into the Grinder, Punching pressure 20 000 daN, Drive capacity 4.16 kW, Servomotor Indexing of sheet, Laser control Technology for v. low tolerances in the difference in the Hole Punch Position, ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, Condition: v.good, Condition: v.good

Spare Parts for Printers and Thermoformers Consisting of :- GABLER 702/703 Complete Control Cabinet ILLIG VHW 72 Infeed Adjustment VAN DAM Vane Vacuum Pump Norgren Plugassist Cylinder Skeletal Waste Material Winder 20 x ILLIG RDM 70K Mold Parts for 68mm PP Cups 1 x Plastic Crate Polytype DDM 300 Spare Parts 2 x VAN DAM Goose Neck Cup Feeder, 1 x Inclined Conveyor Cup Feeder 8 x Plate Cylinder Assembley Polytype BDM 301R

Age 2003 Consisting of :- Max. Infeed width 900 mm Throughput 500 Kg/ hr Main Motor 15kW Pendulum Roller for infeed tension control Dual Roll Ingfeed, Motor 0.75kW Regrind Outfeed Blower type F-25 , Motor 2.2 kW No. of Rotor Knives 3 No. of Stator Knives 3 Sound Proof Housing

Age 2003 Consisting of :- Driven Infeed Pinch Rollers Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs Through-Put 300 KG/H Cutting Chamber 620 x 460 mm Hopper Opening 620 x 500 mm, With Blower Good Production Condition. EXW our Warehouse Enger, Germany

ILLIG RDM75K Thermoformer age 1998, refurbished in 2019 with Siemens S5 PLC Controls, used only for ca. 50,000 hrs, Consisting of:, ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023., ILLIG PLS75b Inline Counter/ Stacker, with Hole Punch Station, age 2006, Rotating Head to neatly remove Products from the Thermoformer Mold, Inline Hole Punch Sta ...

Age 1990, refurbished in 2003 Consisting of : With auto-start facility Unwind Stand Indramat Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump Inline ILLIG UG70b Counter/ Stacker, with delivery conveyor Inline Grinder with Blower EXW our Warehouse Enger, Germany, max. mateerial width: 730 mm, max. Form Area: 680 x 280 mm, Infeed length: 300 mm, max. draw: 125 mm

Mold for Ø73 mm PP-Cups, 32 Cavities, Stacker Basket with Rods & Brushes & Rake, age May, 1997.

Age 1988:- Technical data ILLIG STAL 80 The ILLIG STAL80 can work Inline with any Thermoformer, or it can be used Off-Line as a stand-alone Trim Press. In Stock at our Warehouse in Enger, Germany, Punching table area max: 1000 x 510 mm, Material width max: 800 mm, Infeed length: 20 – 400 mm, Stroke height: 200 mm, Mold height: 272 mm, Punching pressure: 20 000 daN, Drive capacity: 4.16 kW, Total length: 3950 mm, Total width: 2385 mm, Weight approx: 3600 Kg

Age 2000, Lower Form Table upgraded recently by Gabler to be able to run PET products, original closing force was 75kN, upgraded to 115kN. i.e. the Thermoformer can now work with PET, PP, PS, HIPS etc., Hours run only 37,500 hrs!, Preheater ILLIG VHW 72, 2-Roll Preheater for PP, Gabler SWING Thermoformer:, Max. sheet width 480 mm, Double Heating Oven, Max. Form Area 450 x 220 mm, Max. depth of draw 125 mm, Stacker / Counter, Delivery conveyor for Counted Products, Inline Skeletal Waste Material Winder, Max. Dry Cycle speed 44 cycles/ min., Machine is well maintained and in v. good production condition, Inclusive of:, 1 Bosch Sprang 6 cavity Ø75 PP cup tool, age 2000 with Stacker Parts, 1 Marbach 8-cavity Ø95 PP cup tool year 2013 with Stacker Parts, Both Molds very sparingly used and in v. good condition, Film width: 480 mm, Form Area: 450 x 220 mm, draw: 125 mm

Age 2007, Consisting of :-, Siemens S7 PLC Controls Indramat Servomotor Siemens SINAMICS Motor Drive Rittal Control Cabinet Cooling Unit with Temperature Display With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production, This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line., Effective Working Area: 740 x 340 mm, Max. Part Height: 150 mm, Formed Part Stacking Length: 800 mm

Used Gabler D600 Thermoformer, age 1998, Continuously well maintained !, Unwind Stand, Indramat Servomotor Indexing., Print Resgister Unit for Pre-Printed Film, Heating Station, Indramat Servomotor Forming Station, Forming area: 600 x 320 mm, Film width: 640 mm max., Depth of draw neg./pos.: 40/15 mm, Clamping force: 150 kN, Idle cycle rate: 45/ min., Tool types: Combination channel cut, Stacking and counting device, Counted/ Stacked Products transferred automatically to Delivery Conveyor, Waste Material out feed system, Main Machine PLC Controller: Siemens SIMATIC S5, Heater PLC Controller: Siemens SIMATIC S5, Operator Touch Pad Control Panel (OPC) : Siemens COROS OP25, Good Production Condition, Inclusive of Lid Mold Ø95 mm, 5-Cavity, Forming area: 600 x 320 mm, Film width: 640 mm max.