195 results

similar results found in category medical equipment

item-No.: 159480042
CNC controller: HEIDEINHAIN iTNC 530 Axes X-axis travel mm: 1000 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º(0.001º) A-axis degrees: 0.001º Feed rates m/min: 10 Rapid traverse m/min: 60 Worktable Number of pallets: 2 Table dimensions mm: 1000x800 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 20-10.000 Spindle drive power kW: 44 Cooling Cooling through the Spindle Center: 80 Tool system Tool holder: SK-50 DIN 69871 Tool magazin ...
item-No.: 159434865
BRAND: UZAY YEAR: 1999 MODEL: MAKINA UMSY 1010 APPLICATION TYPE: SAWING LOCATION: PORTUGAL MACHINE TYPE: SAWING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 4500 MM MEASUREMENTS DEPTH: 1500 MM MEASUREMENTS HEIGHT: 3200 MM MACHINE WEIGHT: 4900 KG ADDITIONAL EQUIPMENT - IT INCLUDES A CHIP CONVEYOR Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BLADE SIZE: 9400 X 54 X 1. 6 MM - CUTTING SPEED: 20 - 100 M/MIN  ...
item-No.: 159412431
CNC controller: SIEMENS 840D Axes X-axis travel mm: 4.000 Y-axis travel mm: 1.500 Z-axis travel mm: 3.500 Worktable Number of pallets: 2 Table dimensions mm: ø1.500 Spindle (Automatic 1ºx1º) Spindle speed rpm: 5.000 Spindle drive power kW: 37 Cooling High-pressure bar: 60 Tool system Tool holder: ISO-50 Tool magazine slots: 2x 40 Equipment Electronic Handwheel Chip conveyor Infrared probe Signal lamp High pressure pump Workarea light Basic machine dimensions / weight Length mm: 9.365 Wi ...
item-No.: 159294320
BRAND: SACEM YEAR: 1995 MODEL: Racem-603 PRODUCTION HOURS: APPLICATION TYPE: BORING LOCATION: SPAIN MACHINE TYPE: BORING MACHINE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: NUMMODEL: 1060 MAIN DRIVE SPINDLE SPEED RANGE: 4-2500 1/MINNUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 5000 MMY-AXIS MOVEMENT: 2500 MMZ-AXIS MOVEMENT: 2000 MM WORKPIECE WORKPIECE WEIGHT: 35000 KG MEDIA MAIN ELECTRONIC CONNECTION: 220-380V/ 50 HZ ADDITIONAL EQUIPMENT -  ...
item-No.: 159287050
BRAND: SACEM YEAR: 1996 MODEL: MSMG - XC/110-C/N PRODUCTION HOURS APPLICATION TYPE: BORING LOCATION: SPAIN MACHINE TYPE: BORING MACHINE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: NUMMODEL: 1060 MAIN DRIVE NUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 2000 MM Y-AXIS MOVEMENT: 1500 MM Z-AXIS MOVEMENT: 700 MM WORKPIECE WORKPIECE WEIGHT: 10000 KG ADDITIONAL EQUIPMENT - SPLITTER - SQUARE Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - SPINDLE DIAMETER 110 MM
item-No.: 159274736
45MW 50Hz MITSUBISHI 8 x 18KU30A This power plant had operated 8 diesel engine generators for electricity production, using HFO / DO as fuel. Engine model is MITSUBISHI 18KU30A. Generator model is NISHISIBA NTAKL-SE and its output is 5,600 kWe at 50 Hz. They were produced in 1998 and had been successfully operated until 2018. The running hours of gensets are about 21,000 hours. The power plant stopped running o ...
item-No.: 159272797
REF-1874 12-VALVE FILLING MACHINE FOR CORROSIVE SUBSTANCES (BLEACH) WITH DETERGENT DOSING MACHINE AND CAPPING MACHINE Filling machine for corrosive substances (bleach) with 12 filling valves. Dosing machine for detergent (6 valves). Cap feeding system and press-on capping machine. For 0.5, 1, 2 and 5-litre bottles Overall dimensions: length 5,000mm, width 2,000mm, height 3,000mm.
item-No.: 159271987
BRAND: GEMINIS YEAR: 2010 MODEL: GHT 11 G4 2200x8000 PRODUCTION HOURS: APPLICATION TYPE: TURNING LOCATION: SPAIN MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: FAGOR MODEL: 8070 MAIN DRIVE NUMBER OF SPINDLES: 1 NUMBER OF AXIS: 2 MOVEMENT Z-AXIS MOVEMENT: 8000 MM WORKPIECE WORKPIECE DRM: 2200 MM WORKPIECE WEIGHT: 25000 KG TOOLS SLOTS IN STORAGE: 8 ADDITIONAL EQUIPMENT - STEADY REST - CHIP EXTRACTOR - ELECTRONIC HANDWHEEL - MACHINE LEVELING SUP ...
item-No.: 159187394
BRAND: OKUMA YEAR: 1999 MODEL: MX55 PRODUCTION HOURS: 40792 APPLICATION TYPE: MILLING LOCATION: SPAINMACHINE TYPE: MACHINING CENTERS (VERTICAL)AVAILABILITY: IMMEDIATELYCONTROL UNIT BRAND: OKUMAGINDUMAC ID: ES-MIL-OKU-1999-00001 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1100 MMMEASUREMENTS DEPTH: 550 MMMEASUREMENTS HEIGHT: 500 MM CONTROL UNIT BRAND: OKUMAMODEL: OSP-U100MCNC MAIN LANGUAGE: SPANISH MAIN DRIVE NUMBER OF SPINDLES: 1SPINDLE SPEED RANGE: 25000 1/MINNUMBER OF AXIS:  ...
item-No.: 159187376
BRAND: AMADA YEAR: 2006 MODEL: Flexa 100-30 Schiavi PRODUCTION HOURS: APPLICATION TYPE: BENDING LOCATION: SPAIN MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: SCHIAVI GINDUMAC ID: ES-BEN-AMA-2006-00001 Technical Information GENERAL DATA MACHINE WEIGHT: 6500 KG CONTROL UNIT BRAND: SCHIAVI MODEL: CNC 2K MAIN DRIVE PRESSING FORCE: 980 KN BENDING LENGTH: 3000 MM NUMBER OF AXIS: 8 MEDIA MAIN ELECTRONIC CONNECTION: 400/ 50 HZ  ...
item-No.: 159113594
-
16.820 €
country-pl PL
SENFENG FLK 120 automatic mask making machine manufactured in 2020 in China, is used for the fully automatic production of masks consisting of three layers of fabric materials. The masks produced are used in the medical industry, as well as protecting us in everyday life by filtering harmful substances in the air, such as dust and bacteria. The fabric used in production is automatically cut, folded and stitched. Ear bands with a diameter of 3 mm, as well as nose strips with a width of 2 to 3 mm are added to the  ...
item-No.: 159079912
Hermle C650 5-Axis VMC Control:Heidenhein TNC 640i Condition: Excellent Under Power: Yes Specifications: X-Axis: 1050 mm Y-Axis: 900 mm Z-Axis: 600 mm Rapid Linear Traverse Rate (X / Y / Z): 35 / 35 / 35 m/min Max. Workpiece Diameter: 900 mm Max. Workpiece Height: 600 mm Spindle Speed: 18,000 RPM Spindle Motor: 42 kW Spindle Taper: HSK-63 Tool Magazine: 42 ATC Equipped With: Heidenhain TNC 640 Control Dynamc Efficiency (ACC, AFC, Trochoidal Milling) Dynamic Precision (CTC, AVD, LAC) Dimensions  ...
item-No.: 159022420
BRAND: EUROMAC YEAR: 2015 MODEL: STX Plus 1250/30-2500 Flex 12 Hybrid PRODUCTION HOURS: APPLICATION TYPE: PUNCHING LOCATION: SPAIN MACHINE TYPE: PUNCHING MACHINE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: EUROMAC GINDUMAC ID: ES-PUN-EUR-2015-00001 Technical Information CONTROL UNIT BRAND: EUROMAC ADDITIONAL EQUIPMENT - FLEX: SERVOMOTOR-CONTROLLED HYDRAULIC SYSTEM - PROGRAMMABLE ADJUSTMENT OF PUNCH STROKE, SPEED, ACCELERATION AND DWELL TIME Additional Information M ...
item-No.: 158958954
-
5.500 €
country-fi FI
MADE IN GERMANY Typ Model 6-16K Art.Nr. Part no. 10865 Baujahr Year 2010 Max. Drehzahl Max. speed 1/min rpm 15000 Max. Dichte 1,2kg/dm³ V/Hz Max. density 1,2kg/dm³ 230V 1PH, 2,3kW Weight - 190 kg
item-No.: 158904574
Table Table size 10.000 x 1.100 mm Max weight allowed on table 30.000 kg. Travels Longitudinal Traverse (X Axis) 8.500 mm Transversal Traverse (Y Axis) 1.200 mm Vertical Traverse (Z Axis) 2.000 mm Rapid Traverse 25.000 mm/min Max. Working Feed 10.000 mm/min Headstock Automatic Head 2.5º / 2.5º INCLUDED Taper ISO 50 DIN 69871 Turning Speeds 20 – 4.000 r.p.m. Speed Ranges 2 Main Motor Power 30 kW Additional equipment Automatic tool changer (ATC) INCLUIDED ATC type Chain Horizontal / Vertical  ...
item-No.: 158904573
Manufacturer NICOLÁS CORREA Model PRISMA-25 Year 2006 CNC HEIDENHAIN i TNC 530 Table Surface 2.800 x 900 mm. Carrying Load Table 4.000 kg. Number of T Slots 5 T Slots Dimensions 22 mm. Longitudinal Traverse (X Axis) 2.500 mm. Transversal Traverse (Y Axis) 1.000 mm. Vertical Traverse (Z Axis) 1.000 mm. Working Feeds (X/Y/Z) 5-10.000 mm/min Rapid Feed X/Y 20.000 mm/min Rapid Feed Z 15.000 mm/min Head Type Universal Manual Taper ISO 50 Turning Speeds 3000 rpm Head Power 22 kW GSS 4TH Axis INCLUDED  ...
item-No.: 158904569
Manufacturer IBARMIA Model ZVH45H L4000 Year 2003 CNC FANUC 18i Table Surface 4.600 x 850 mm Rotary table INCLUIDO Rotary table size Ø 850 mm. Longitudinal Traverse (X Axis) 4.000 mm. Cross Traverse (Y Axis 800 mm Vertical Traverse (Z Axis) 860 mm. Rotary table turning (C Axis) 360º C Axis positioning 0.001º Titling head range (B Axis) ±105º B Axis positioning 0.001º Rapid Traverse (X,Y,Z) 30.000 mm/min Taper ISO-40 Turning Speeds 10.000 rpm Nº Ranges 2 Engine Power 18.5 kW Torque 126 Nm  ...
item-No.: 158896459
-
4.500 €
country-es ES
BILDU LAN Transportador Root Modelo OF. 810604. Año Fabricación.: 2004. Potencia.: 3.8Kw. Masa.: 2.5tm. Medidas.: 5.50x3x0.62 (LxAxH)
item-No.: 158676338
-
4.000 €
country-es ES
VECOPLAN VIBRATION CONVEYOR VR85/18 Trough width: 850 mm Trough height: 220 mm Total length: 6050 mm motor: 2,2 kW INCLUDES: - machine revised in our workshop - operation mannual - Posibility to mount screening zone and/or metal free-zone for mounting of metal detector; aditional cost - Posibility to paint the machine in your desired colour - Dimmensional drawing of the equipment available in pdf and/or Acad format
item-No.: 158576349
CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 3.600 (2 x 1.421 with Intermediate wall) Y-axis travel mm: 1.100 Z-axis travel mm: 900 Feed rates m/min: 20 Rapid traverse m/min: 40 Worktable Table dimensions mm: 4.200 x 1.100 Max. workpiece weight kg: 5.000 Spindle Spindle speed rpm: 10.000 Spindle drive power kW: 32/22 Spindle torque Nm: 298/205 Cooling Tank capacity: 980 l High-pressure bar: 40 Tool system Tool holder: HSK-A100 Tool magazine slots: 120 M ...
item-No.: 158526040
T-Type moving column milling machine with turning option Manufacturer LAGUN Model GTM-2 Year of Manufacture 2014 CNC HEIDENHAIN TNC 640 Integrated Turning Table Table Surface Ø 1800 mm Radial T slot size 22 Max Speed of table 320 r.p.m. Speed ranges 2 Max. Weight Allowed on Table 5.000 kg. Power 28 kW Toque 8.400 Nm. Min Indexing Table 0.001º Travels Longitudinal Travel (X Axis) 2.000 mm Transversal Travel (Y Axis) 1.200 mm Vertical Travel (Z Axis) 1.500 mm Column Moviment( V Axis) 1.000 mm. ...
item-No.: 158481690
-
7.900 €
country-es ES
Glue-on thickness max. 15 mm, equipment: jointing/gluing/trimming/milling-flush/milling-radius, profile scraper RS 2mm, corner copier, surface scraper, buffing, function-tested machine
item-No.: 158446139
-
484 €
country-lv LV
Less powerful version of SilentPro100-3. Instead of 1100W motors, Silent100-3 has three 550W motors which still makes it very powerful for an affordable price. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek Silent100-3: Three 550W direct drive electrical motors. Anti-rust coating. Air filter on each pump. Low noise and vibrations level. Oil-free. Easily portable on two rubber wheels. Technical data: Power supply , V: 230 Motor power,  ...
item-No.: 158446137
-
665 €
country-lv LV
High quality oil-free compressor, great for heating systems, workshops, service stations, spray painting and many other applications. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro100-3 230V: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 1Ph ...
item-No.: 158446134
-
1.611 €
country-lv LV
High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro300-6: -Six 1100W direct drive electrical motors. -Very large 300l air tank. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 6x1100(6600) Motor speed, Rpm: 1440 Air supply, L/min: ...
item-No.: 158446132
-
1.098 €
country-lv LV
High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro200-4: -Four 1100W direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 4x1100(4400) Motor speed, Rpm: 1440 Air supply, L/min: 960 Maximum press ...
item-No.: 158446128
-
367 €
country-lv LV
Compact 50l compressor with two very powerful, silent direct drive motors. Designed for workshops, dental offices and other places where regular compressors are too loud. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek SilentPro50-2 2.2kW: -Two powerful 1100W electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power suppl ...
item-No.: 158446125
-
193 €
country-lv LV
With very powerful 1100W motor SilentPro10-1 is excellent option for anyone who needs compact and portable compressor that provides considerable air flow rate. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro10-1: -Compact design. -Much more powerful than other compressors of the same size. -Minimal maintenance needed. -Anti-rust coating. -Air filter. -Low noise and vibrations level. -Oil-free. Technical data ...
item-No.: 158421789
Manufacturer: Fata Production Machinery (1995) Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing Furnace (Selas) Flying Exit Shear 2 Tension Reels Line Capacity: 60.000 MT/year Maximum Process Section Speed: 113m/min Maximum Entry Section Speed: 136 m/min Maximum Strip Thickness: 0.28 mm Minimum Strip Thickness: 0.17 mm Maxi ...
item-No.: 158421787
Manufacturer: Bliss Revamp: Clecim (1994) Configuration: 19”x53”x48” 1 Stand 4Hi TMM Main Equipments:   1 Uncoiler Entry Bridle (Two Rolls 20”) Anti- crimping roll Work Roll Bending Exit Shear Exit Bridle (Two Rolls 20”) Electrostatic oiler (both sides) Tension reel HGC                                   Strip width range: 600 – 1060 mm Strip thickness range: 0.17 – 1.9 mm Maximum speed: 610 m/min Coil weight: Max 18.8 mt Inner  ...
item-No.: 158421768
Slab Caster Main Data • Manufacturer: Concast-Sumitomo • Number of Strands: 1 • Machine Radius: 8m • Number of Segments: 7 • Mould Size: 760 -1060mm (not adjustable when casting) • Slab Thickness: 160mm • Oscillator: Mechanical • Straightening: Multipoint • Cooling: Single Zone • Casting Speed: 1.7 m/min • Capacity: 650 kt/y • Tundish Weighing: Yes • Tundish Equipment: Stopper Rod, Submerged Entry Nozzle • Dummy Bar: Bottom Entry, Linkage Design  ...
item-No.: 158378538
Machine on Sale: NOVA JET CLEANING & IRON SCREENS KIT On sale Nova Jet Cleaning & Iron screen kit installed in 2018. Machine is in perfect running conditions and well maintened as worked very few hours (less than 1000h). The complete lot include everything necessary to run the machine along with all perifericals and large set of spare parts for the machine. Machine is fully operational and can be visited for a test and inspection. Lot composition: 1.- Nova Jet Cleaning System for stripping rotary nickel  ...
item-No.: 158260241
STRATASYS OBJET30 PRIME V3 3D PRINTING (year 2015) 3D printing of medical implements that require prolonged contact with the skin, such as headsets or surgical guides. Prototypes of joints, connections and sealants. The Objet30 Prime printer offers 12 different materials so you can create accurate prototypes of consumer products with smooth surfaces and flexible components from your desktop. Printing time: 1102 Specifications: layer thickness 28 microns for Tango materials; 16 microns for all other material ...
item-No.: 158215732
-
4.800.000 US$
country-br BR
This specification describes Wärtsilä scope of supply for 6x18V50DF Trifuel Engine Generator Sets for FPSO. The specified equipment are intended to be installed on generating set module, consisting of six Wärtsilä 18V50DF engines with generators and essential auxiliary systems in one module. The module and module auxiliaries are not part of the specification scope, but dimensions is given as guidance. Main dimensions of the module: the information of module main Length: 25,20 m Beam: 16,40 m Beam  ...
item-No.: 158174546
Manufacturer MORI SEIKI Model NZ1500 T2Y2 Year 10 / 2008 CNC MSX-701 III Capacity Swing over bed 800 mm. Max distance between spindle nose surfaces 1.130 mm. Max. turning diameter 320 mm. Max. workpiece diameter for transferring 300 mm. Max. turning length 810 mm. Bar work capacity 52 mm. Axis X1 Axis Travel 210 mm. X2 Axis Travel 210 mm. Y1 Axis Travel +65 / -45 Y2 Axis Travel -65 / +45 Z1 Axis Travel 810 mm. Z2 Axis Travel 810 mm. Spindle 2 B-Axis Travel 900 mm. C Axis in Main Spindle INCLUID ...
item-No.: 158101093
-
1.100 €
country-de DE
Used but very well maintained machine ! Technical DESCRIPTION : The G 7782 CD is a cleaning and disinfecting disinfection machine for the automatic reprocessing of instruments and accessories and accessories in medical practices and nics. For the various fields of application, e.g. gynaecology e.g. gynaecology, urology, ENT, anaesthesia and surgery, anaesthesia and operating theatre. of baskets and inserts. The utensils can be thermally treated at 93 °C - 10' or 93 °C - 3' and chemo-thermal at at 6 ...
item-No.: 158025102
Envasadora multipista para sachets de film complejo, capacidad variable y tamaño de sobre de 60 x 150 mm. Máquina totalmente restaurada, con cuadro eléctrico nuevo, pantalla táctil, componentes PANASONIC y fotocélula para film impreso. Listas para trabajar, disponibilidad inmediata. Producción aproximada 5.500 sobres a la hora. Mas información consultar.
item-No.: 157996402
Complete bottling and capping line for hydroalcoholic solution (B105) Composed of: - Rotary vacuum filling machine (18 filling heads). Manufacturer: MECANIZADOS ESPADA. Model: TR 18V. Year: 1999. - Crimping machine. Manufacturer: MECÁNICA ROPAL. Model: G R V 105. Year: 2007. - KEYMAX capping machine (1). Model: EM007-07. Year: 2010. - KEYMAX capping machine (2). Model: EM0006-07. Year: 2010. - Automatic bottom labelling machine. Manufacturer: RUSAN. Year: 2005. Further information on request.
item-No.: 157996400
Complete bottling and capping line for hydroalcoholic solution (B115) Composed of: - Rotary vacuum filling machine (18 filling heads). Manufacturer: HISPAMEC. - Pneumatic pump of the filling machine. - HISPAMEC crimping machine. - Capping machine with bottom labelling system. Manufacturer: TAXTA. Model: MIFE 5601. With AVERY 211L labelling head. - Vibratory valve feeder. Manufacturer: TAD. Model: VA. - EGARPACK screw capping machine. - FLEXLINK conveyor.
item-No.: 157672922
Manufacturer NICOLÁS CORREA Model CF 25/25 Year 2008 CNC HEIDENHAIN TNC 530 HSCI Table Table Surface 3.100 x 1.100 mm Number /Dimmession of T-Slots 5/200 mm. Carrying Load Table 6.000 Kg Travels Longitudinal Traverse (X Axis) 2.499 mm Cross Traverse (Y Axis) 1.000 mm Vertical Traverse (Z Axis) 1.000 mm Rapid feed 20.000 mm Working feed 10.000 mm Head Head Type UAD Indexing degrees 0.1º/0.1º Taper ISO 50 Main Motor Power 22 kW Spindle Speed 6.000 rpm Equipment Coolant through Spindle INCL ...
item-No.: 157622406
USED TEFSA EHR 1200-16 FILTER PRESS REF.: C5899 Used EHR-1200/16 filter press manufactured by TEFSA. Currently it is provided with 19 plates of 1200x1200 mm but it has a capacity of 29 plates General characteristics: Manufactured by TEFSA Model EHR 1200-16 Type Press filter Year built 1993 Weight 13.300 kg With complete documentation Overall dimensions: Total length: 7,305 mm Total height: 2,000 mm Total width: 2,000 mm General characteristics: Working length: 1900 mm Hydraulic cent ...
item-No.: 157622341
USED STAINLESS STEEL 127 LITRES COYTASA REACTOR WITH HALF-COIL JACKET AND AND THERMICAL OIL BOILER SKID REF.: C6780 Reactor manufactured by COYTASA with a total capacity of 127 liters. The equipment has a half-coil to heat with thermal oil and the body is heat-insulated. Top bottom screwed to the body with stirring in the central flange, sight glass for lamp, sight glass and flange connections. Bottom discharge with poppet valve and CAM-LOCK type discharge connection. The equipment has a thermal oil boile ...
item-No.: 157622340
USED STAINLESS STEEL 125 LITRES JACKETED BPV-125 TURU GRAU REACTOR REF.: C6752 TURU GRAU reactor made of stainless steel with a capacity of 125 liters. With scraper anchor + planeterium agitation (with speed control) and turrax type agitation in the lower bottom (3 hp / 2860 rpm motor), with jacket with electric resitencias, with lid elevation by hydraulic piston. Equipment suitable for working under vacuum (liquid ring vacuum pump incorporated in the bench). Tiltable tank by hydraulic piston. With el ...
item-No.: 157622336
USED STAINLESS STEEL 316 50.000 LITRES ASEPTIC TANK REF.: C6567 Aseptic tank made of 316 stainless steel with a capacity of 50,000 liters. General characteristics: Type Aseptic tank Material Stainles steel 316 Equipment prepared with KZE to be able to work as an aseptic tank supplying nitrogen. The entry and extraction of nitrogen into the tank through the upper bottom by means of a poppet valve with NW32 connection. Equipped with a pressure gauge to check that the pressure in the tank does not exceed 0.5 ...
item-No.: 157622335
USED STAINLESS STEEL 316 22.000 LITRES ASEPTIC TANK REF.: C6564 Aseptic tank made of 316 stainless steel with a capacity of 22,000 liters. General characteristics: Type Aseptic tank Material Stainles steel 316 Equipment prepared with KZE to be able to work as an aseptic tank supplying nitrogen. The entry and extraction of nitrogen into the tank through the upper bottom by means of a poppet valve with NW32 connection. Equipped with a pressure gauge to check that the pressure in the tank does not exceed 0.5 ...
item-No.: 157622332
USED STAINLESS STEEL 316L 65.000 LITRES TANK REF.: C9057 Horizontal tank made of 316L stainless steel manufactured by AGUILAR Y SALAS with a total capacity of 68,300 liters. Unused equipment General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel 316L Year built 2017 Weight 12.250 kg Body Working pressure FV/6.5 bar Working temperature 100 ºC Test pressure 9.3 bar Capacity 68.300 l Technical characteristics: Capacity 65.000 litros útiles (68.300 litros totales)  ...
item-No.: 157604292
Stoßwellengerät Storzmedical Modulith SLK Funktionsbereit nur Stoßwelle wie auf dem Bild
item-No.: 157604244
Controller: SIEMENS SINUMERIK 840 D Axes X axis travel mm: 700 Y axis travel mm: 590 Z axis travel mm: 480 4 axis table tilt degree: + -110 Turning table 5 axis: 360 Rapid speed mm / min: X, Y, Z 32,000 Work table / pallets Dimensions mm: dia 650 Opt A: ø500 (included) Opt B: 600 x 400 (included) Maximum table load kg: 200 Load Opt A kg: 200 (included) Load Opt B kg: 200 (included) Spindle Spindle speed rpm: 10.000 Spindle drive power kW: 15/33 Torque Nm: 192/189 Tool system Cone: BT-40 ...
item-No.: 157604228
Technical Features of this 5 Axis Machining Centers Manufacturer QUASER Model MV204IIU / 10 Year 12/2002 CNC HEIDENHAIN ITNC530 3 Working Tables / Pallets Table 1 Size Ø280 mm. Table 2 Size Ø 500 mm. Table 3 Size 600×400 mm. Max weight allowed on table 265 kg Min-max distance over table 150-760 mm. Axis Longitudinal Traverse (X Axis) 700 mm Cross Traverse (Y Axis 590 mm Vertical Traverse (Z Axis) 480 mm Titling spindle head range (A Axis) ±110º A Axis positioning 0.001º Table turning (C Axi ...
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)