This lot has not been tested for functionality. Parts may be damaged or missing. Auction-ID: A1-47917-16

Weight 1000kg  Digging bucket capacity 0.025cbm/120kg  Bucket width 380mm  Engine SALE 192F Bore stroke Single cylinder, fan cool  Rated power 7kw/3000r/min Main pump G5-6 Displacement 6.8ml/r  Swing motor SANYANG (BMRS-250) Traveling motor SANYANG (BMT-245) Travel speed 1. 5km/h  Main Demensions  Overall dimension (LxWxH) 2775 X 930 x 2219 mm  Wheelbase 910 mm Total length of track 1230mm  Platform ground clearance 380mm  Platform back turming radius 784 mm  Chassis width 896 mm  Track width 180 mm  Chassis ground clearance 132 mm  Track height 320 mm  Operating Range  Max. Digging depth 1650 mm  Max. Vertical digging depth 1375 mm  Max. Digging height 2610 mm  Max. Dumping height 1850 mm  Max. Digging radius on ground 2850 mm  Min. Rotation radius 1330 mm  Max. Upgrade height of bulldozer blade 345mm  Max. Digging depth of bulldozer blade 255 mm Auction-ID: A3- ...

Unused Kubota Engine Incl. 3 excavator buckets of 77 cm, 42 cm and 21 cm. A tool case with contents. Swing boom bucket. Viewing by appointment Auction-ID: A1-40383-44

JPC HT13 crawler mini excavator, equipped with a 7kW KOOP Euro 5 diesel engine. With an operating weight of 1,350 kg and a compact width of 980 mm, the machine is ideally suited for earthmoving, trenching, landscaping and work in confined spaces. The machine is equipped with an earthmoving bucket, a front dozer blade and an operator protection roof (ROPS). Its maximum earthmoving depth is 1,850 mm, providing excellent versatility for routine construction and development work. 2025 manufacturing machine, in very good general condition and close to new. Shows few signs of use. CE marking present. Serial Number: 2025010085. Auction-ID: A3-43552-37016

New compact machine for medium-duty work. With cutting arm/swing boom and adjustable tracks (min 75cm, max 93cm) - WITH 2 YEAR WARRANTY FOR BOTH PRIVATE AND BUSINESS BUYERS. Includes 1 standard excavator bucket. 10hp. SELLER CAN LOAD WITH FORKLIFT OR DELIVER AT HOME AND ABROAD (delivery for a fee) Auction-ID: A3-43543-10922

functionality not checked ; Operating hours and condition may still change slightly, the device is still in use ; Includes mechanical quick coupler, backhoe bucket 30 and 60 ; ATTENTION, the wooden tongs visible in the photos are not part of this lot Auction-ID: A1-47292-2

Unused Mini Excavator Auction-ID: A1-40419-10

This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given for the correctness of the information ; Auction-ID: A1-47343-201

Includes spare chisel ; Auction-ID: A1-47343-57

1800 kg mini excavator with 3 cylinder eur5 water-cooled diesel engine of 18.4KW / 25hp. Equipped with servo control. Equipped with cab, swing boom with radius of 1500mm, dozer blade 1100mm, hydraulic pump 22L/min, breakout force 10KN, Excavator bucket 80cm, tank capacity 9.5 liters. Unused machine Auction-ID: A1-40419-567

1800 kg mini excavator with 3 cylinder Kubota D722 eur5 diesel engine of 10.2 KW. Equipped with servo control. Equipped with cab, swing boom with radius of 1500mm, dozer blade 1100mm, hydraulic pump 22L/min, breakout force 10KN, tank capacity 9.5 liters. Demo machine Auction-ID: A1-40419-33

ID3802 Caterpillar 321 CLCR TU year/Baujahr 2006 5025 hours/hours 23.5 t Front windshield cracked; incl. 2 x digging buckets and 1 x Erkat milling attachment windshield cracked; incl. 2 x backhoe bucket and 1 x Erkat mounted tiller

Maximum digging depth 1650mm; excavator bucket capacity 0.025 m³; Height of bulldozer plate 345mm; 360 degree rotation; lamp on the arm; 5789 Auction-ID: A1-47514-197

There are a total of three identical mini excavators for sale, this is device no. 2 of 3 Manufacturer: JPC Model: HT12 Mini Excavator Year of construction: 2025 New machine Unused 0 operating hours CE marking available KOOP diesel engine Motor power: 12 HP (8.8 kW) Operating weight: 1,100 kg Maximum digging depth: 1,650 mm Dimensions (L x W x H): 2,500 x 950 x 2,200 mm Hydraulic chain drive Rubber tracks Front dozer blade integrated Including digging shovel Hydraulic operation via joysticks Work lighting available Overhead Guard (ROPS) Ready to use Auction-ID: A1-47170-8019

There are a total of three identical mini excavators for sale, this is device no. 3 of 3 Manufacturer: JPC Model: HT12 Mini Excavator Year of construction: 2025 New machine Unused 0 operating hours CE marking available KOOP diesel engine Motor power: 12 HP (8.8 kW) Operating weight: 1,100 kg Maximum digging depth: 1,650 mm Dimensions (L x W x H): 2,500 x 950 x 2,200 mm Hydraulic chain drive Rubber tracks Front dozer blade integrated Including digging shovel Hydraulic operation via joysticks Work lighting available Overhead Guard (ROPS) Ready to use Auction-ID: A1-47170-8020

A combined sanitary container unit, consisting of two containers, presumably of the Czech make Moravia Containers or Containex, is available. Container exterior dimensions X/Y/Z: approx. 6060mm/2440mm/2840mm, interior height: 2500mm, protective primer: epoxy, insulation: mineral wool, floor traffic load: 2500N/m², exterior sheet metal thickness: 0.5mm, corrugation depth: 10mm, urinal: 6, cubicles: 6, washbasins: 5, electric heating convectors: 2, under-sink units: 5. The unit is designed for simple and quick disassembly and reassembly. The two containers must be separated during transport. Documentation available. An on-site inspection is possible.

Air filter has recently been replaced Oil/filter still needs to be done Fire service notification Few hours Quick coupler cv10 Machine is little used Auction-ID: A3-43548-19210

ID3798 Wacker Neuson EZ80 year/Year of construction 2022 1530 hours/hours 8.4 t Blade, 450 mm rubber track, 3rd control circuit, diesel refuelling pump, hydraulic quick coupler, 3 buckets Shield, 450 mm rubber track, 3rd control circuit, diesel refueling pump, hydr. Quick coupler, 3 buckets

Operating weight: 4059 kg Equipment: - 1 ditch cleaning shovel - 1 backhoe bucket Information: - Without quick-change system - Control unit defective - The excavator has been standing for over 7 months

With extra box 210 x 400 x 200 With Piquer With roof Auction-ID: A3-43548-9049

Technical details Manufacturer: Komatsu Model: PC160LC-7 Type: Hydraulic crawler excavator Operating hours: 10939 h Configuration: - Long-carriage (LC) undercarriage - Third extended / long-reach boom configuration - CW30 hydraulic quick coupler - 3-speed travel system - Enclosed operator cab Application: - Earthmoving operations - Excavation work - Utility and infrastructure projects - Construction and demolition applications - Material handling Attachments: - CW30 quick coupler installed - Bucket not included Condition: Used Observed condition: - Original Komatsu paint largely intact - Normal scratches and paint wear from operation - No obvious weld repairs visible on boom or stick - Counterweight shows typical contact marks - Hydraulic cylinder rods appear straight - Hydraulic hose routing appears complete - Hoses show normal age-related wear - Undercarriage estimated at approximately ...

Full list of contents of the lot at the back of the photos Auction-ID: A3-43548-16583

Machine is in good working order Work lighting Roll bar Swing boom Mechanical quick coupler 2nd travel speed 1 piece wide container Auction-ID: A1-41947-11

ID3750 Caterpillar MH3026 year/Baujahr 2020 approx. 5.500 hours/hours Material handler, elevating cab, with 4 outriggers, with grab Material handler, elevating cab, with 4 outriggers, with grab

Working, manual stake-off is necessary (outside cabin) Window defective at the front Auction-ID: A1-40141-160

Auction-ID: A7-47288-250

Hours: 3380 hours. Has a Hydraulic quick coupler and a 3 cylinder Kubota engine. Caution: Excavator has a hydraulic circuit malfunction Auction-ID: A1-40141-326

TECHNICAL SPECIFICATIONS Manufacturer: Tecnomeccanica ZUERCHER S.p.A. Bergamo Description: Floating grab dredger Design: Grab excavator with gantry body Type: TZBK 150 (15t) Year of manufacture: 1989 - Revised: 2017 Gripper volume: 4.50 cbm Shell grab type: MRS 1090, rope mechanical Total load capacity grab: 15.0 to. Max. dredging depth: 60 m underwater Conveying capacity: approx. 100 cbm/h (approx. 180 t/h) Power supply: SENN generator set (BJ 2017) Unit Type: FDG 650 Engine: VOLVO TWD 1653 GE (6-cylinder) Rated power: 650 kVA (547 kW) Particulate filter system: CLEAN LIFE, type SMF-AP 8.1 Pre-screen bar grate available: yes Screening machine: 1-deck, with shower Dewatering Bucket Wheel: SMT Stitch Type: E3009 (BJ 2017), 3.0 kW Number of mooring winches: 4 pcs. Number of discharge belts: 4 pcs. Overall length: 25,190 mm Total length pontoon: 20,800 mm Overal ...

Power: 22 kW

Overview Compact articulated wheel loader with enclosed cab, suitable for industrial, agricultural and construction applications. Technical details - Serial number: 19090302 - Engine Model: 4TN98-80ALCC - Engine power: 43 kW - Nominal load capacity: 1,500 kg - Operating weight: 4,200 kg - Dimensions (L×W×H): 5800 × 1900 × 2710 mm - Date of manufacture: 09/2019 - Certification: CE marking - Type: Compact Articulated Loader - Cabin: Closed - Equipment: Hydraulic front bucket - Traction: 4x4 (four-wheel drive) - Tires: Industrial for off-road use - Application: Loading, material handling, agriculture and construction - Instrument cluster: Operating voltage displayed 13.5 V Included Accessories - Front bucket (depending on state) Status and location Used condition – sold as is, without warranty. Auction-ID: A7-45941-23