welding machines used for sale (1,732)

The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low sparking formation, high duty cycle Auction-ID: A7-50799-86

plate thickness:15 mmtotal power requirement:13 A 9 KVAweight of the machine ca.:50 kgdimensions of the machine ca.:1000 x 400 x 650 mm

cutting range for steel to:20 mmtotal power requirement:3~ 220 / 380 Vweight of the machine ca.:100 kgdimensions of the machine ca.:500 x 750 x 1000 mm

cutting width:2500 mmNumbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kWlength:6000 mmcontrol:KS 20 A Messer Griesheim Documents:vorhanden

table width:2300 mmtable length:7000 mmburner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden

Advanced technological tooling with a dense and symmetrical structure of executive components. Designed for precise positioning and rigid locking of geometrically complex components (e.g. car body sheets) during automated welding or welding processes. The design is characterized by a high degree of repeatability of base points and is fully adapted to be mounted on a welding turntable. LIST OF COMPONENTS: 1. DESTACO pneumatic (knee) clamps – 30 pieces. Heavy actuators responsible for mechanical locking of the workpiece. 2. FESTO compact pneumatic actuators – 14 pieces. They are used to eject positioning pins or auxiliary locks. 3. Pressure position sensors (inductive/magnetic) – approx. 30 pieces. They monitor the opening and closing states of actuators. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete bus system with flexible hos ...

GENERAL CHARACTERISTICS: Stand-alone technological tooling dedicated to a specific operation in an automated production line. It is characterized by a massive, open central frame and unified, heavy clamping units. The device works directly with industrial robots in the thermal hazard zone, having advanced installation protection and a dedicated mass current dissipation system. LIST OF COMPONENTS: 1. DESTACO main welding clamps with opening angle control – 20 pieces. Equipped with a mechanical angle scale (range 5-135°) facilitating collision-free loading. 2. Eye bolts (transport eyelets) – 4 pieces. 3. Copper ground blocks (welding ground) – approx. 2 terminal points. Thick copper connections to protect electronics and positioner bearings from welding current. 4. Electro-pneumatic box (I/O junction box) – 1 piece. A collection enclosure for signals fr ...

plate thickness: 15 mmMaximum Chamfer Lengths / Maximum Chamfer HeightsMaximum chamfer length for steel 400 N/mm² 15 mmMaximum chamfer height for steel 400 N/mm² 10.6 mmMaximum chamfer length for steel 600 N/mm² 9 mmMaximum chamfer height for steel 600 N/mm² 6.4 mmMaximum chamfer length for steel 800 N/mm² 6 mmMaximum chamfer height for steel 800 N/mm² 4.2 mmRadiiMinimum radius 55 mmGeneralWorking speed (max.) 2 m/minRated power consumption 2600 WSheet metal thickness 4 mm - 160 mmDimensionsLength 554 mmHeight 361 mmWeightWeight 16.5 kgTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 25 mmSheet thickness: max. 25 mmMax. bevel length: 10 mm (for steel with a tensile strength of 400 N/mm²)Bevel angle: 30°Power: 2,000 WVoltage: 220 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26283 Technical data: - Water-cooled TIG – DC system can be moved, - Welding current infinitely adjustable with digital display - min. 5 A to max. 420 A - Mains connection 400 V - With: - SYNERGIC control system with programmable welding tasks - 2-stroke – 4-stroke setting - HF ignition and liftarc - Gas flow regulation, etc. - Hose package 8m light version - Ground cable - Pressure reducer - Space requirement approx. W 700 x H 1200 x D 1200 mm - Weight approx. 200 kg

Used ESAB CXL-DX 3500 plasma cutting machine (2016). Table suitable for large format sheets with a usable metal area of 12,000 mm (length) x 2,500 mm (width). Specified cutting capacity: 360 amps. A complete extraction system is included. Key details - Manufacturer: Esab - Model: CXL-DX 3500 - Year of construction: 2016 - Table/work surface: 12,000 x 2,500 mm (metal length x metal width) - 1 x Plasma Specified Cutting Current/Power: 360 Amps -1 x Autogen - Included: complete extraction system

Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible.

length:1200 mmheight:800 mmweight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm

weight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm

Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Clamping force 38 k ...

CONTROLS  PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE  external diameter min.: 8 mm  external diameter max.: 90 mmRound tube min. 8 mm           max. 90 mmSquare tube min. 8x8 mm            max. 80x80 mmRectangular tube min. 15x10 mm                 max. 60x85 mm

Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system -Manufacturer: Köcor, stud welding machine with stud welding gun -Type: 902 E -Power: 200 - 900 A -Stud welding gun: K 22 -Welding area: Bolts and pins from M3 – M12 -Quantity: 1x stud welding machine available -Dimensions: 590/300/H510 mm -Weight: 81 kg

Periods: 50 Power: 20 kVA Auction-ID: A7-50868-58

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485; Auction-ID: A1-50865-330

Auction-ID: A1-50750-391

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 408 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kWvolume capacity: 20.000 m³/hweight: 1590 kgModular plug & play airtowerfor hall extraction of welding fumes with integrated, soundproofedFan, automatic, differential pressure controlledFilter cleaning, system control with color display, particle pre-separation andIFA - tested filter cartridges. The system is for a volume flow ofaverage 20,000 m³ / h designed1st filter stage - main filter:Filter area: 222 m²Number of filters: 6 piecesDust class according to DIN EN60335-2-69: M.Degree of separation:> 99.9%Cleaning: Jet - PulseCompressed air connection: NW 7.2 mm,4-6 bar, oil and water free2nd filter stage - fine dust filter.Filter area: 65 m²Filter class according to ISO 16890: ISOePM1 80%3rd filter stage -Synthetic fiber mats:Filter area: 8 m²Filter class according to ISO 16890: ISOcoarse 60%Total filter area: 295 m²Dimensions:Width  ...

Auction-ID: A1-50867-23

Auction-ID: A1-50750-110

AKM/Laskar BSM-1500-1000G-1K-1 automated spot welding installation, year of construction 2023, suitable for professional spot welding applications. The installation is in very neat condition, has only been used to a very limited extent and works perfectly properly. The last maintenance was carried out in March 2025. All accompanying manuals are present and are included. In addition, various important accessories and parts for the welding equipment are included, as shown in the photos. These parts are part of the lot. See photos for a further impression of the machine, the supplied accessories and the general condition. Auction-ID: A3-46133-22119

Auction-ID: A1-50377-240