welding machines used for sale (1,732)

Manufacturer: CLOOS Model No.: Welding robot Year: 2017 Condition: Used Stock number: 9507

table diameter: 800 mmtable load: 1100 Kgswivelling range: 360 Gradturning speeds: U/minconnected load frequency: 400 Vweight: 3,5 tDimensions (LxWxH): 2,8 x 1,2 x 2,4 mWelding positioner- consisting of a column with RDM 50 slewing ring Typ RDM50- RDM 11 rotary table Typ RDM 11- System without control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 1100 Kgswivelling range: 360 Gradturning speeds: U/minconnected load frequency: 400 Vweight: 3,5 tDimensions (LxWxH): 2,8 x 1,2 x 2,4 mWelding positioner- consisting of a column with RDM 50 slewing ring Typ RDM50- RDM 11 rotary table Typ RDM 11- System without control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A central welding fume extraction system is offered. Airflow: 30000m³/h, airflow: 30000m³/h, motor power: 30kW, compressed air connection: 6-8bar, max. static pressure: 2500Pa, duty cycle: 100%, control: PLC. The system is equipped with 2 spark traps and various ductwork components (extraction arms and hoods not included). An inspection is possible by arrangement.

An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement.

Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible.

Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible.

Welding power source: Starmatic 1003 DC, max. welding current: 1000A at 100% duty cycle, lifting column height: 4850mm. Including flux tray, rail and vessel turning device. Documentation available. An on-site inspection is possible.

Laser source: Bystronic BLT 3500 Turbo, laser power: 3500W, wavelength: 10600nm, max. sheet weight: 160kg/m². Base machine weight: approx. 7000kg, laser source weight: approx. 1600kg. Documentation available. An on-site inspection is possible.

- set 1 (5 x in stock)  Driven Master unit CD-30- set 1 (5 x in stock) Idler Slave unit CI-30 - Load capacity drive 15 ton- Load capacity idler 15 ton- Turning capacity combi 45 ton- turning speed 130 - 1300 mm/Min- Wheel size diameter 520 mm- Wheel size width 176 mm

- 1 x Driven Master unit 150 ton- 3 x Slave Idler unit 150 ton- Vessel diameter 1000 - 5000 mm- Wheel diameter:- Wheel width:- Rotation speed 10 - 1000 mm/Min

Manufacturer: Rudholzer Type of Machine: Welding machine Year of Manufacture: 2018 Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 3, Height 4 (cm or m) - Weight 4000 kg - Voltage 400 Volts - Current 83 Amperes - Power 57.6 (Kw or KVA) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KUKA Model: KR 5 ARC Year: 2014 Condition: Used Stock number: 9467 Control system: KUKA KR C4 Maximum arm reach: 1412 mm Number of axles: 6 pieces Maximum load capacity: 5 kg Machine weight: 127 kg The offer includes: Smart Pad Control Panel FRONIUS TransPuls Synergic 4000 water-cooled welding power unit Steel robot base Steel Fence Complete electrical installation

table length: 2400 mmtable width: 1200 mmtable height: 880 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height (lateral area): 200 mmweight: 1549 kgdimensions of the machine ca.: 3000 x 1500 mm SIEGMUND Authorized Dealer - All Items in Stock! SPECIAL OFFER SIEGMUND Retro Welding Table 3000x1500x200, accessories includedSIEGMUND welding table just like 25 years agowith plasma nitriding and modern table legsProduct Description- Table dimensions: 3000x1500x200 mm- High-quality S355J2 N steel with plasma nitriding- Material thickness: approx. 24.5-27 mm- Hole diameter: 28 mm- Holes arranged in a 100x100 mm grid- Corners, edges, and holes chamfered at 45°- Side panel height: 200 mm- Holes in side panels arranged in a diagonal grid- Construction reinforced with ribsPlasma-nitrided version:- Protection against rust, scratches, and weld spatter adhesion- Corrosion-resistant / higher load-bearing capacitySpecifications:- 28-hole pattern / Dimension ...

Manufacturer and model: iDEAL BAS 050-11 Rated power (ED 50%): 4.5 kVA Secondary voltage: 2.6 – 4.4 V (6 stages) Clamping force: 10 kN (hydraulic) Maximum compression force: 2.2 kN Iisc Hq E Rrszqdkxjvef Machine weight: approx. 180 kg Hydraulic tensioning, operated via foot switch Pyrometer (GTR): yes (temperature display on the touch panel) Connection voltage: 380 – 419 V Bi-metal/carbide saw blades: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Blade dimensions: 6×0.4 – 30×0.6 mm Blade steel S235JR: max. cross-section 75 mm² Blade steel X5CrNi18-10: max. cross-section 40 mm² Pyrometer / GTR: The integrated pyrometer (GTR) enables contactless temperature measurement during the annealing process. The target temperature is pre-defined in a recipe and displayed on the panel – the annealing cycle en ...

An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.

Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible.

Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement.

Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Donaldson Torit, mobile welding fume extraction / dust collector type PT 1000 -Drive: 1.1 kW -Max. volume flow: 1100 m³/h -Extraction arm: Ø 165 mm x 2210 mm -Transport dimensions: 1200/620/H1645 mm -Weight: 105 kg

Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Welding fume extraction: welding fume extraction arm -Extraction arm: Ø 200 mm x 4700 mm -Transport dimensions: 2490/800/H290 mm -Weight: 31 kg

A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible.

bore: 22 mmweight: 214 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.