pharmaceuticals and cosmetics machines used for sale (389)

Paste mixer Manufacturer: MTI Type P-10ADO Performance: Usable volume 11 litres, nominal volume 15 L Technical specifications : The paste mixer is suitable for mixing, homogenizing, dispersing and suspension of low to high viscosity products, Externally heated up to 65 °C and vacuum-proof Heating cooling jacket 5 bar Product space 0.75 Equipment: Machine stand Transmission suspension with drive motors Flanged weelen bearing with container lid and mixing tools Mixing tanks Squeezing device Electrical control Dimensions: Length 1210 mm Width 1180 mm Height 1925 kmm Weight 1700 kg

Stainless steel tanks Manufacturer Noorden Capacity 500 litres Mobile standing stainless steel tank Double jacket for heating and cooling without pressure Product space pressure- and vacuum-resistant -1/+3 bar Operating temperature product space around jacket 150 °C Magnetic stirrer on the underbody Power 0.25 kW Outer diameter: 0.90 m Total height 1.95 m Spout DN 25 Clamp

Stainless steel tanks Manufacturer Tannroda GmbH, stainless steel construction Type SLT/BB 001 - No. 548 Capacity 2200 litres Cylindrical stainless steel tank standing on feet Material in contact with the product 1.4404 Interior -1/+3 bar Double-jacketed pressure and vacuum resistant Heated and cooled Agitator The container has a slight vacuum damage in the interior, see picture. Drawing available, documents available

GRACO pneumatic pump, Max Flow: 9.5 L/MIN / 2.5 GPM, Max Air WPR: 1.2 MPa / 12 bar / 180 PSI , Max Fluid WPR: 6.2 MPa / 62 bar / 900 PSI

The ZANASI 40 E model is a reciprocating motion machine designed for the processing and filling of two-piece hard capsules, as well as their sequential closing and ejection., Possibilities for powder dosing as well as granule dosing., Several powder formats available:, Full format:2,4, Cadence / hour: 40 000 capsules/hour , Positions: 6 , Machine absorption (Kw): 2.2 kW , Elec: 380 V / 50 Hz / 14.2 A

Disinfecting washer for laboratory., Upper basket for injection, Lower basket, Maximum cold water temperature (°C): 20 °C , Maximum hot water temperature (°C): 70 °C , External dimensions (mm): 730x900 H 845 , Interior dimensions (mm): 500x540 H 600

Motorized curved stainless steel belt conveyor, Width of strip 100mm, Adjustable feet in height up to 150 mm, Motorized conveyor: Yes, Conveyor belt width (mm): 90 , Maximum working height (mm): 1055, Electric: Motor: SEW-USOCOME: 230 V / 50 Hz / 0.55 kW

METTLER TOLEDO weigher feeder of type XS1, From left to right, Balance model: METTLER TOLEDO Type: BF2-L-P, Max weighing range (g): 100 g, Mini weighing range (g): 5 , e:: 0.01 g , d :: 0,01 , T=- :: 90 g , Dimensions (mm): 900x700 H 174 mm , Conveyor belt width (mm) :: 100 mm , Balance belt width (mm) :: 57 mm

Coating pan GLATT, Glatt Coater GC 750/500 from 1994 with changeable drum in Ex-Execution, - Process Equipment Glatt Coater GC 750 (Equipment used for test run), - Perforated Drum with D= 500mm Drum and 750 mm with, Inlet and outlet air shoe for both drums, Capacity 750 drum 50 – 75kg/batch, Capacity 500mm drum 15- 45 kg /batch, - Discharging has to be done manually, - Spraying arm with nozzle adapter, Spraying System with 1 Schlick Nozzles, - Control Cabinet ( Pneumatic / Electrical) with Siemens PLC S5, - Air handling unit 7AIR including:, - with inlet air fan, - F7 and H12 filtration, - Preheating, - Dehumidification, - Heating, - Deduster HERDING, - Ventilateur dair de sortie, - WIP nozzle inside drum and external nozzle, Elec: 3x400 / 24VDC / 50Hz , Useful volume: 500mm: 15-45kg 750mm : 50 - 75kg , Spray nozzles: X, Air handling unit: X, Dust collector: X, Number of tanks:  ...

Dissolution tester SOTAX CE70., SOTAX CY 7-50 Pump, Sold with accessories., Positions: 7 , Elec: 230 V

Ventilated safety cabinet with KOTTERMANN brand tray retention, Total retention volume 21.3 litres, With doors equipped with a cylinder to lock the doors open or to close them automatically., To connect to a centralized suction system via two DN70mm air inlets, 3 fixed shelves with retention:, - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 285x1010 H 275mm (Retention volume 9.7 Liters), External dimensions (mm): 570x1200 H 745 mm

Motorized belt conveyor., Motorized conveyor: Yes, Conveyor belt length (mm): 3000, Conveyor belt width (mm): 500 mm , Working height (mm): 390 mm , Electric: GYROS: 230 / 400 V / 50 Hz / 1.45/ 0.84 A / 0.25 KW , Speed variation: Yes

Eddy current screening machine with belt drive Manufacturer: Kemutec KEK Type K 800 C Version - ATEX 2/3 D

Dental colloid mill Manufacturer: Probst & Class PUC Type 10 L Power 7.5 kW U/2.910 min.

Inline homogenizer Manufacturer: Higra Mix Type HG 140 Capacity: 40,000 l/h Power: approx. 30 kW Speed: 3,000 rpm Dimensions: Length 1100 x Width 450 x Height 600 cm Net weight: 220 kg Mixing chamber: diameter 185 mm Product inlet: DN 100 Product outlet: DN 80 The homogenizer is designed for the production of emulsions and suspensions with a wide range of viscosity.

100 litre process tank Manufacturer: Hermann Waldner Content: 100 litres Technical specifications : cylindrical standing stainless steel tank with double jacket, insulation and agitator Material container 1.4435 Operating temperature 80 °C Material double jacket 1.4404 Pressure-resistant 2.5 bar Operating temperature 90 °C Capacity 22 litres Equipment: Propeller agitator Spout at the bottom center Agitator from above Documents: Nameplate

50 litre stainless steel container Manufacturer: Waldner Content: 50 litres Technical specifications : cylindrical standing single-walled stainless steel tank Material 1.4301 Operating temperature 40 °C Propeller agitator kW 0.37, 1,405 rpm the interior of the container is plastic-coated Spout at the bottom center Documents: Nameplate

Mixer Manufacturer : AVA Huep GmbH & Co. KG Type: HTL 3 Power: 1.1 kW Content: 4 liters gross volume Technical specifications : Stainless steel mixers for powdery to paste-like products Dimensions Speed 15-400 rpm, rated speed 128 rpm Frequency-controlled Width approx. 512 mm Height approx. 701 mm without table Length approx. 1076 kg Weight approx. 200 kg Documents: available

Rimek Compressor, 10 stations, 6 tons of compression, For B-type tooling, Maximum diameter of tablets 16mm, Maximum filling 17mm, Maximum rate 18 000 tablets / hour, Number of revolutions per minute: 30, Sold with several formats:, round diameter 6 mm incomplete missing 1 die, round diameter 7 mm complete, round diameter 12 mm complete, oblong diameter 18x7 mm complete, Elec: 230 V / 50 Hz , Dimensions (mm): 563x530, Cadence / hour: 18000, Number of revolutions/min: 30, Compression (kN): 6 tons , Maximum tablet dimensions (mm): 16, Maximum powder filling height (mm): 16, Machine height with hopper: 1565, Machine height without hopper: 1535, Format sold with the machine: Yes

Electrically heated process vessel Filling device Manufacturer: Haas Type FMSX consisting of: Electrically heated agitator tank with a capacity of approx. 90 litres Heated Mouvex piston pump, electric heater, control cabinet with Siemens PLC and FU for pump and agitator, in a mobile stainless steel frame.

Plate apparatus Manufacturer APV Type K 55 Capacity: 8,000 litres/hour Technical specifications : 6 Departments 1x steam, 1x hot water, 2x product vs. product, 1x cold water, 1x ice water Capacity 8,000 litres/hour Clip seals 423 plates total Material Plates AISI 316 (V4A), thickness 0.8 mm 1 box with replacement seals is still included. good condition Documents partially available

In-line homogenizer with high shear force Manufacturer BWS Technologie GmbH Type S 200 Material parts in contact with the product 1.4462 Double-acting mechanical seal Motor explosion-proof Output 22 kW, liter output max. 10,000 l/h Suitable for dispersing, emulsifying and homogenizing

Process Vessels Net capacity 250 litres, gross capacity 339 litres Pharmaceutical version Agitator Polished interior Product space: Pressure-resistant up to 2.5 bar, operating temperature 138 °C Double jacket: Pressure-resistant up to 4 bar, operating temperature 151 °C mobile

Homogenizing Machine Manufacturer: EscoLabor Type EL-3

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Batch size 2-7 Tabletop device: Bowl and lid made of stainless steel, polished inside, Knife holder polished Bowl with double jacket and temperature probe Polyamide transport sash for manual operation Control Panel Vacuum-resistant design incl. pressure gauge and connections Membrane keypad for two speeds (1,420 and 2,810 rpm) Product temperature display and time selection Separate control box, drive motor with brake Application: Confectionery and bakery products, laboratories, cosmetic and pharmaceutical products

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Tools Polycarbonate lid Bowl made of V2A, ceramic-blasted, cool/heat double jacket Polyamide transport sash Control membrane keyboard 2011 in the equipment cabinet Knife holder with 2 Kullen knives Temperature sensor PT 100 Auxiliary contactor shutdown main motor when temperature reaches Operating instructions available

Stainless steel tank, capacity 1200 litres Manufacturer: REIMELT Beam agitator, power 2.2 kW Head single-walled, hinged lid Outer diameter: 1,260 mm cyl. Height 1,000 mm Total height without agitator 1,750 mm Total height with agitator 2,300 mm

Plug valve, pharmaceutical version Manufacturer: Visval AG Type SoliValve 100 Suitable for the powder transfer industry. It allows the transfer and dosing of powder under the best containment conditions. It is suitable for operation within OEB5. Fully automatic and closed separation of solids in bags, bottles, drums (1L to 700L). The opening is controlled by a high-precision stepper motor and a backlash-free ball screw, which enables opening steps with an accuracy of up to 0.1 mm.

Water Distillation Plant Manufacturer Stilmas Type MS 10 4 S Serial No. 4285/90 Capacity 120 -220 lt/h Temperature 143-175 °C Steam 36-75 kg/h Pressure of 3-8 bar Documents available

2000 litre process vessel Manufacturer: TSA Process Equipment WFI Containers NEW in original packaging Year of construction 2020 electro-polished Double-jacket, pressure-resistant Operating temperature product room 130 °C Operating temperature sheath 170 °C Accessories