pharmaceuticals and cosmetics machines used for sale (362)

RBP Bauer ST50 blister punch - offers the possibility to divide any standard blisters into single pocket blisters or pocket groups, blister size max. 145 x 130 mm (BxL), output infinitely variable up to 40 blister per minute, electrics 230V/50-60Hz, Siemens SIMATIC S7-200 with SIMATIC OP3 Operator panel, pneumatic 6 bar, machine dimensions approx. 1100 x 600 x 1400 mm (LxWxH), machine net weight approx. 130 kg, mobile machine on wheels

Brevetti K32-400 automatic inspection machine for cartridges, inspection of bubbles, fill level, cap defects, stopper defect/position, particles (with three inspection units), with corresponding format parts suitable for containers with a diameter of 8 to 52 mm and a height of up to 150 mm, includes format part for catridges Ø8.65x63 mm and Ø8.65x76 mm, electrics 400V, 50/60Hz, 3Ph, power 8 kW, compressed air 5 bar, height of infeed/outfeed 900 +/- 25 mm, machine floor space approx. 2400 x 2600 mm, machine height approx. 2440 mm, machine net weight approx. 2800 kg, capacity up to 400 cartidges per minute

• Suitable for drying and granulation (intended for preparations for in vitro diagnostic use) • Batch operation • Peristaltic pump for spray liquid • Top spray nozzle for spray liquid • Scales • Product container volume 24 L • Batch volume max. 16 L • Batch weight 1-8 kg (depending on product) • Product suction lance from Müller barrel • Conical transition piece for emptying into Müller barrel • Heating register • Star filter for separating product and air flow • Inflatable seals • Product temperature max. 85°C • Explosion-proof container • Max. explosion pressure 10 bar • ATEX Zone 20 inside the mixer (according to conditions in 2010) • Equipment category 1 according to Directive 94/9/EC • Equipment group II, D (dust) • Protection class IP 5x • Max. surface temperature 180°C • Operator terminal MP 277 Touch • Process data acquisition with ...

AZO rotary vibrating sieve, New motor, Sold with 6 synthetic screen sleeves, 0,2 mm, 0.5 mm, 0,6 mm, 1.4mm, 1.4 mm, 1.5 mm, Elec: 400 V, Engine power: 1,5 kW, Sieve entrance: 250x250, Entry Sieve: 250x250, Sieve diameter:: 175, Sieve length: 340, Screen length: 340

Double-walled glass tank, Volume: 87 , Useful volume: 50 L , Pneumatic: -1 / +1 bar , Temperature (°C): -20 / +200 , Cover diameter: 450, Bottom tank outlet diameter: 34 mm, Mobile tank: Yes, Double envelope: Yes, Double envelope pressure: 0 / +0.5 bar , Double-walled temperature (°C): -20 / +200 , Dimensions (mm): 850x850 H 1160 , Top tapping: 1, Side tapping: 1, Tank bottom outlet diameter: 34 mm, Double envelope temperature (°C): -20 / +200 , Top nozzle: 1

• Load capacity 70 kg • Fork mount with rectangular tubes, tube centre distance 368 mm, tube length 435 mm • Lifting height max. 1,540 mm (floor to lower edge of tube) • Parking brake • Mobile • Next VDE test 03/25 • Electrically rechargeable with charger 230V/50Hz

Stainless steel tanks Manufacturer Concept Type PH-1-011 Capacity 4200 liters Material V4A in contact with the product Cylindrical stainless steel tank standing on feet Product space: pressure-resistant/vacuum-resistant +3/-1 bar, operating temperature 143 °C Double jacket: pressure-resistant 3 bar, operating temperature 143 °C No agitator

Pure steam generators Manufacturer Stilmas Type PSG 50 /DTS Clean steam volume 0-max. 50 kg/h at pure steam pressure 3 bar or pure steam volume 0-max. 100 kg/h at pure steam pressure 1 bar The process guarantees the production of dry, sterile, pyrogen-free, pure steam that is free of particles or metal bions.

Dental colloid mill Manufacturer: Probst & Class PUC Type 10 L Power 7.5 kW RPM 2910

Courtoy Compressor, Type R292F, Type D, 55 positions, Year 1999, Missing the 2 compressed descent and the cables between electrical cabinet and machine;, All the documentation including the electrical diagrams is present (in French), Punch type: D, Weight (kg): 4500 , Cadence / hour: 43 000 - 350 000, Compression (kN): 100, Precompression (kN): 10, Maximum tablet dimensions (mm): 25,40, Outer diameter of die (mm): 38,10, Matrix height (mm): 23,81, Punch diameter (mm): 25,40, Die outer diameter (mm): 38,10

Vibrating sieve RUSSELL, Type AC600, Sold without seals and without screen, ATEX: internal II, 2D, T100C / external II 3D, T120C, Dimensions (mm): 700x920 H 1085, Sieve diameter (mm): 510, Engine: italvibras g.silingardi , Engine power: 0,25kW , ATEX: Yes (ATEX II 2 D )

AVERY DENNISON LABEL, ALX 720 print head., Elec: 400 V / 50 Hz , Maximum format (width) mm: Less than 60 mm , Maximum cadence / minutes: about 60 products / minute , Pressure: 4-6 bars , Print speed: 2 to 30 m/min , Conveyor dimensions (mm): length: 2000 mm / Width: 82 mm

Semi-automatic filling machine BÜNDER SCHMITT, Previously used to fill 50, 100, 250 ml bottles, Elec: 220 V, Dimensions (mm): 610x610 H 2120 , Pump: KNOLL: MX20S, Number of pumps: 1, Flow rate l/h: 5 to 5.600 , Maximum pressure (bar): 40 , Tremis volume: 16 Litres , Viscosité: 200.000 mPa·s, Hopper volume: 16 Liters , Viscosity: 200,000 mPas, Temperature (°C): -30°C to 140°C

FETTE Data Control 2, Installed in a mobile cabinet including an EPSON printer

Stainless steel tank, Mobile, tilting, double envelope, Tank bottom drain, Total volume 75 litres, Useful volume 50 litres, Dimensions between wheel passage: 645 mm, tipping height: 560 mm, Volume: 76, Useful volume: 50 L , Pneumatic: 2 bar , Cover diameter: 440 mm, Bottom tank outlet diameter: 36 mm, Mobile tank: Yes, Double envelope: Yes, Dimensions (mm): 850x850 H 1250, Side tapping: 1, Tank bottom outlet diameter: 36 mm

Tablet tester., Manufacturer data:, Weight, - Measurement range: 0.01-50 g, - Resolution: 0.0001 g, - Precision: ± 0,0003 g, Durability, - Measuring range: 10-40 N, - Resolution: 1 N, - Precision: ± 1 N, Thickness, - Measurement range: 1-20 mm, - Resolution: 0.01 mm, - Precision: ± 0.1 mm, Accuracy, - Measuring range: 1-30 mm, - Resolution: 0.01 mm, - Precision: ± 0.1 mm, Elec: 230 V , Dimensions (mm): 760x430 H 610

FETTE Terminal, Data Control, Type 2080, Year 1989

Drum mixer with bagging flap, solid very heavy version, drum and mixing spiral stainless steel. Year of construction not known. Three-phase motor rewound, condition see pictures

• Nominal cooling capacity 5600-6000 kcal/h Temperature difference input-output 5°C Volume flow max. 20-24 l/min Thermoplastic tank 39 l Mobile Drive 230V/50-60Hz/2.33 kW

Grieser VPL 3,0 L laboratory vacuum planetary mixer suitable for mixing powdery solids, liquids and pastes as well as for the incorporation of fillers, jacketed for heating/cooling, total volume mixing container 3.0 liters, useful volume mixing container 0.3 to 2.1 liters, operating pressure mixing container -1/+1.3 bar, operating pressure jacket max. 3 bar, flow temperature 100ºC, mixing container can be raised and lowered, speed mixing tool 18-393 RPM, speed planet/scrapper 13-176 RPM, material of product contacting parts 1.4404, material dynamic seals PTFE, material static seals EPDM/Silikon, electrics 400V AC/50Hz, total power 3 kW, Siemens SIMATIC S7-1500, machine weight (without container) approx. 300 kg, includes Single Temperiertechnik type CH-6-6-W heating/cooling system (temperature of the circulating medium (water) 0-90ºC, max. operating pressure 17 bar, test pressure 21 bar ...

• For packing blisters in folding box cartons • Output max. 500 cartons/min, the max. speed depends on the format/product • Folding carton format range max. W 80, H 90, L 155 mm • For double-sided offset or same-sided tuck-in flaps • Blister stacking device • Max. 10 blisters per stack / max. height 85 mm • Blister refill chute, manual • 3 suction arms for folding box pick-up and counter-suction for pre-breaking • MB-Bäuerle CAS 21/4 net leaflet folding and inserting machine from the magazine • Color embossing printing unit on both sides • Faulthy package ejection with counter-check • New in 2020: HMI B+R Automation, IPC Beckhoff • Servo controller Elau MC-4 with control unit Elau C600 • Drive 400V/50Hz, rated current 6A / back-up fuse 25A • Various accessories such as format parts / spare parts • Infeed blisters via Flexlink conveyor • Upgrade PLC i ...

SG Innoscan CVTCorecvSIGx inspection machine for vials, etc., rotary infeed table, total of 7 camera inspection stations with automatic height adjustment, Particle 1+2 (inspects for moving particles), side inspection (inspects for filling level, cosmetic defects of barrel and crimp defects of cap), top cosmetics (inspects for defects at cap area, scratches, crimp, contamination, displacement of cap, Flip-off inspection), bottom C&C (inspects for chips and cracks at the heel area and on the bottom surface), bottom cosmetics, particle low density (inspects for light particles and fibers), 1 inline outlet + 3 outlet trays, includes format parts for 2R vials, capacity up to 600 vials per minute (machine in excellent condition – hardly used)

Bosch (SIG) / Jakob & Wienmeier / OCS / Seidenader / Pester blister packing line comprising of Kraus infeed conveyor for manualy feeding the blisters, Bosch (SIG) HSL horizontal flow pack machine with Koenig & Bauer alphaJET inkjet printer for printing the variable data onto the flow packs including camera print verification, Allen Bradley PLC, 2 (two) Jakob & Wienmeier horizontal cartoning machines type CK05-AV-6/R and CCM-AH-6-600-SV with blister buffer station type CCM-PZ, wolke m600 advanced inkjet printer for printing the variable data onto the cartons including camera print verification, Laetus bar code reader, feeder for booklets, etc., OCS type HC checkweigher (max. 750 g), Seidenader T&T Single Unit Track & Trace System for marking and verification of folding boxes/cartons for serialisation and aggregation with wolke m600 advanced inkjet printer, Pester PEWO-pack 250 compact str ...

Cremer TQF-4100 product counting system including bucket elevator to feed packaging machines (eg. VFFS, etc.), 4-lane counter with separate infrared detection channels, automatic reject in case of undercounting or overcounting, keypad for setting up, operating, monitoring and managing the recipe of the counter, electrical connection 3x400V/3Ph/50Hz, power consumption 700 VA, compressed air supply 6-8 bar, operating pressure 6 bar

• This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) • Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. • The visible surfaces are made of stainless steel 1.4301 and are brushed (RA

• Original (OEM) Kilian die disc/turret with slideways for Kilian Synthesis 500, Generation 1 • Tool type EU-D • Punch diam. 25.4 mm, die diam. 38.1 mm • Keyed upper and lower punches • Transport trolley • Unused, like new

Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: • TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device • DVE 9070 Cover and protective film removal • SFM 5072 Filling and sealing machine • NTS 8140 Transport system • Output max. 36,000 disposable syringes/h, infinitely adjustable • For disposable syringes 0.5 - 10 ml depending on format set • For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set • For 100 mm nest • For tub H max. 130 mm • Parts in contact with the product made of stainless steel AISI 316L • IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English • Calibration (KAL) for all process-relevant measuring systems • Material specification • PLC Siem ...

• Conveyor belt length 1,350 mm • Conveyor belt width 100 mm • Web spacing 30 mm, web height 5 mm • Conveyor belt made of white plastic, as good as new • Adjustable inclination • 1 speed • Dust compartment • Without inlet and outlet funnel • Mobile • Drive 400V/50Hz

• Set up for ALU/ALU operation and ALU/PVC • Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 18 mm • Output 15 - 50 forming cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Forming film Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), mech. clamping • Cover film-Ø max. 240mm, core-Ø 76 mm, mech. tensioning • Splice Detection • Film feed after forming and sealing • \kerning2 Print mark control\kerning0 • \kerning2 Film stretching unit\kerning0 • Pin hole detection for form foil and lid foil, Visiotec VisioScan MT-160/200 • Without Heating plate station for PVC (can be delivered later upon request for extra charge) • Forming station with compressed air for PVC form foil, pre-equipped for pre-stretching die • Mechanical forming station for ALU forming foil • \kerning2 PLC Beckhoff IPC, Servo control ...

• Stainless steel pharmaceutical version for mixing predominantly powdery materials and for granulating after the addition of binding agents • Gross capacity 122 litres, usable capacity approx. 37 - 100 litres • Mixing tool 1420/2840 rpm, 3.7/4.4 kW, drive with air gap seal • Chopper tool 1420/2890 rpm, 2.8/3.5 kW, double-blade, one-piece, drive with air gap seal • Container jacketed for heating/cooling (without separate heating/cooling unit) • Product temperature sensor • Blind flange for retrofitting a DIOSNA Mixing Probe • Lockable opening in the container lid for adding mixing components • Nozzle for adding liquid • Screw cap with degassing/venting filter • Pneumatic outlet, can be swivelled off for cleaning • HMI with IPC Lauer VS486 installed on mixer in control cabinet with pressurised enclosure protection class E Ex p (T4), manufactured by Gönnheimer, type ...