Item: Marel IPM3 X300 Slicer and Portion Cutter
Category: Cutter / Slicer
Model: IPM3 x300
Used Marel IPM3 X300 Slicer and Portion Cutter with:
• Stainless steel slicer and portion cutter machine
• Rotating blade
• Complete w/ laser eye weigher
• Volume scanner m. INW3 x 400
• M Series 3000 controls
Final verification by Marel
This is an ideal machine to cut fish r meat in portions according to a
pre-defined weight and dimension
Type 2176 and 2177 (SCL)
3 set of PC/TFT
Thermal plate recorder
Resolution 2540 dpi
Plate type: thermal aluminum plates (830 nm)
Max. Plate format: 750 x 680 mm
Plate thickness: 0.15 to 0.3 mm
Productivity: approx. 27 plates/hour
RIP: All software, dongles
Multi Cassette Container Auto loader (50/100 plates)
Thermal plate Processor on line
On line Plate stacker
4 Colors (Perfecting 2/2,4/0))
IPC system (Integrated Press Control)
API II Control Console
SEMI APC (semi automatic plate change)
IR DRIER BALDWIN
Automatic rollers wash up device FASTWASH
Automatic impression wash up device
Automatic Blanket wash up device
MITSUBISHI DIAMOND DAMPENING SYSTEM
GRAFIX MEGATRONIC S
Original 154 mll turns (first owner)
Electronic doble sheet control
NON STOP feeder and delivery
TECHNOTRANS BETA D
AIR PRINT CABINETS
Free of any ...
New generation of Flow-Pack with 3 independent brushless engines. This
machine has a chain
conveyor with removable baffles of 160 mm (around 1400 mm length).
The parts that touch the product are made of stainless steel. In
addition, it has lateral
TRANE CHILLER ABSORPTION MACHINE.
Very low running hours and always maintained into a climatized room.
Brand: Trane USA
Model: ABSC 665
Power: 1600 Kw
The power of this machine is 1.000.000 Frig Cal/h
C.O.P = 0.70
Inlet/outlet temperature = 106/90ºC
Flow = 112 Tn/h
Nº of Steps = 4
Inlet/outlet temperature = 12/7ºC
Cooled water Flow = 275 Tn/h
Nº of Steps = 5
Inlet/outlet temperature condensation water = 30/37ºC
COMPLETE TILES FACTORY MACHINERY.
The Tiles factory was stopped at the end of 2020. All the machines are
in a good condition and works properly.
The reason of the shutdown was to renew the fleet of machines for new
generation devices able to reduce man power and increase efficiency.
The machines are still ready to work and placed in its original
location, therefore a running test could be done, checking all the
process, in case of your interest.
SCOPE OF SUPPLY:
• 2 PRESSES
• 2 DRYERS
• 2 ENAME ...
1 COMEZ electronic double needle bed warp knitting machine type
32 inch (812,8 mm) working width,
gauge GG20, 640/640 latch needles,
8 bars with electronic control,
Stitch density (on both needle beds) 1 - 40 stitches/cm,
with creel with 396 positions,
feeding possibility creel or beam,
machine delivered with 6 warp beams,
with COMEZ Data Control 3 and all it's memory cards (setup, pattern
and machine state),
Machine supplied with COMEZ SystemWin software and COMEZ Draw ...
1 MATHIS yarn or ribbons sizing / finishing machine type FIOMAT-B,
Pilot range for continuous finishing / sizing of up to 48
machine is also suitable for sizing and finishing of ribbons and
made of stainless steel,
two unwinding axis for 24 yarn spools each,
yarns are guided by combs, with slight back-and-forth movement,
1 liter immersion trough (electric heating up to 95 ºC) with
removable immersion rollers (for cleaning),
pneumatic actuated impregnation / squeezing padder, roller width 115
1 POLYTEX pinking machine type ZH (Zigzag cutting)
knife width 500 mm,
stroke 50 mm,
table size 505 x 945 mm,
power driven swatch and sample cutting machine,
precise and accurate thanks to right angle guide with millimeter
exchange of knife is effortless and fast,
motor 0,37 kW
machine delivered with 2 new cutting boards (one to be used and one as
1 UNITECH stenter type Redevo 4DF2 K2200,
working width up to 220 cm,
high entry with CORINO spreading and centering device type FLC4,
UNITECH padder face roller width 240 cm,
UNITECH coating head type Coat 220 with face roller width 240 cm,
stenter entry with 3-finger uncrawlers and IR edge feelers,
vertical combined pin and clip chain with 4 m long entry field,
IR selvedge pre-drying before entering the drying fields,
2 gas heated field ...
USTER type MDTA3S Variante SF micro dust and trash analyser with USTER
ROTORRING 3 sliver former, year 1993. In this unit tufts get opened up
to single fibres, are cleaned, blended and formed to a sliver.
USTER type QuickSpin QSS-1000S Variante SF, year 1993, open end or
rotor spinning unit, where the sliver is spun into Quickspin model
yarn. This unit spins the sliver into yarn in a Lab Set-up, and also
helps for quick comparable test results of yarn as well as the cotton
1 USTER type HVI SPECTRUM (High Volume Instrument), year 1999, with
MICRONAIRE and METTLER TOLEDO scale type PB302-ZAG, this unit checks
the raw cotton parameters like Length/Strength, Maturity, Micronaire,
color/trash and Moisture.
2 ELECTROJET roving frames type ROVEMATIC ADR, year 2003 and 2004,
each with 128 spindles, each with ELECTROJET travelling blower
2 ELECTROJET roving frames type ROVEMATIC ADR, year 2009,
each with 144 spindles, each with ELECTROJET travelling blower
1 RIETER bale opener type Unifloc A10, year 1998, track length 22 m,
picking arm length 170 cm
1 RIETER fine cleaner type Uniflex B60, year 1998
1 RIETER cleaning/mixing type Unimix B7/3, year 1998
1 RIETER type Uniclean B11, year 1998
1 RIETER beater type Uniflex B50, year 1998
1 RIETER condenser type A 2/1, year 1994
1 RIETER mixing type Unimix B 7/3S, year 1994
1 RIETER mixing type Unimix B3/4S, year 1994, belt length 6 m, belt
width 1,2 m
NEGRI BOSSI V530-4100 (year 2007)
Working hours: 66,000
Screw diameter: 90 mm.
Screw length / Diam ratio: 20 L / D
Calculated injection volume: 2540 cm3
Injection capacity (PS): 2270 gr.
Injected material volume: 500 cm3 / s
Maximum pressure on the material: 1630 bar
Screw torque: 4000 Nm
Screw rotation speed: 175 min
Plasticizing capacity (PS): 105 g / s
Heating zones: 5
Heating power: 34
Injection group support force: 121 kN
Closing force: 5300 kN
Mold opening stroke: 830 mm.
Mold th ...
NEGRI BOSSI V800 (8000H-6700) (M161) injection moulding machine
Year 2012. Hybrid. In operation.
Energy consumption is less than 0.37 wh/g thanks, in part, to the
inverter driven electric motor for the screw rotation.
Working hours: 41.933 h.
Screw diameter (mm): 90
Screw L/D ratio (u): 20
Theoretical injection capacity (cm3): 3240
Shot weight PS (g.): 2950
Injection rate (cm3/s): 590
Max. pressure on material (bar): 2050
Screw torque (Nm): 7000
Screw speed (min-1): 150
Plasticising capacity PS (g/s): 1 ...
Perfecting 2/3, 5/0
CPC 1.02 with CARD MEMORY
ALCOLOR with BALDWIN cooling
Weko Powder spray
Bacher Register clamps
Extra compressor on feeder
Superblue on transfer cylinders
51 mill impressions
Free of damages on cylinders
Model: VMC 1600A
Control unit: MITSUBISHI MC64
Table dimensions: 1700 x 750 mm.
T-Slot (Size x Number x Pitch): 18 x 5 x 130 mm.
Max. Table Load: 1.500 kg.
X axis traverse: 1600 mm.
Y axis traverse: 820 mm.
Z axis traverse: 620 mm.
Distance from Spindle end to Table: 188 – 808 mm.
Distance from Spindle center to Column: 800 mm.
Spindle speed (Gear type): 40 – 4000 rpm.
Max. Tool Weight: 15 kg.
Control unit: Heideinhain TNC 410
Serial Number: F8036
Table size: 1.000 x 510 mm.
Tee slots (W x Nº) : 18 x 5 mm.
Table load (maximum): 600 kg.
X axis traverse (telescopic cover new): 810 mm.
Y axis traverse (telescopic cover new): 510 mm.
Z axis traverse: 560 mm.
Spindle nose to table surface: 150 – 710 mm
Spindle nose to column surface: 570 mm.
Spindle speed: 6000 r.p.m.
Nº de serie: L2TAD0245
Control numérico : Fanuc Series Oi Mate TD CNC Control
Max. Swing: 500 mm.
Max. turning diameter: 380 mm.
Max. turning length: 440 mm.
Bar work capacity: 65 mm.
Max. workpiece weight (with tailstock): 175 Kgs.
X axis travel: 190 + 20 mm.
Z axis travel: 450 mm.
Spindle speed range: 4.000 rpm.
Chuck size: 203 mm.
Número de herramientas: 12
Shank height for square tool: 25 mm.
Shank diameter of boring bar: 40 mm ...
Serial number: PM350671
Control unit: FANUC 18i-T
Swing over bed: 700 mm.
Swing over saddle: 480 mm.
Recom. machining Ø: 380 mm.
Max. machining Ø: 550 mm.
Max. work length: 1.050 mm.
Draw tube Ø: 117.5 mm.
X axis / Z axis: 362 mm. / 1.105 mm.
Chuck Ø: 305 mm.
Speed range: 30-3.000 r.p.m.
Spindle nose Ø: A2-8
Spindle bore Ø: 102 mm.
Bearing Ø (Front): 160 mm.
Number of tools: 10
OD tool heigh: 25 ...
You didn't find your wanted machine?send wanted inquiryto all dealers (no registration necessary)