39249 results

similar results found in category machines for soil cultivation, sowing and harvesting

item-No.: 139678054
-
93.000 €
country-it IT
- Four colours size max 52x74 cms. Year 1997 with 2+2 or 4/0 - CPC 1.04, Cp Tronic, Alcolor , Technotrans refrigeration system - 104 mil. copies, High pile delivery - Autoplate, All automatic washing devices, Preset, Powder spray Alphatronic - Any print test possible, Perfect conditions and always maintained very well -In production, Available in September 2019
item-No.: 139678052
item-No.: 139678051
-
ON Price
country-de DE
Treatment system Make: DAUB Mechanical Engineering Run-through width up to 980mm with salt shaker top outdated
item-No.: 139678049
Horizontal band saw fully automatic Cutting diameter round: 250 mm Cutting length: 400 mm Cutting length Double feed: 800 mm Cutting speed infinitely variable: 20 - 70 m/min Saw band: 3660 x 25 x 0.9 mm Rolling duct: 2500 mm Roll width: 300 mm Cutting pressure approx.: 2 - 35 kg Saw drive: 0.55 kW Pump drive: 0.81 kW Weight approx.: 1200 kg Dimensions (L x Wx H ) approx.: 4000 x 2000 x 1200 mm Set of bimetallic saw bands, Automatic material feed, Coolant device, Documentation in German.
item-No.: 139678043
Automatic poultry weighing line of 4000 b/h. The line consist in : Drive unit, tensioner, 90 degree curve , 180 degree curve, up/down, track, chain, trolley, shackles. - weight bridge x 1 - drops off x 7 - computer x1 - software scada 12 port X1 - Bord PLC x 1 - Encoders x2 - Block sensors - Rate limiter x1 - Histogram - Overhead still - Suspension material One year guarantee.
item-No.: 139678033
-
250 €
country-de DE
für vorbeschichtetes Kantenmaterial bis 1 mm - vordere und hintere Scherenkappung - Untergestell
item-No.: 139678034
-
250 €
country-de DE
for pre-coated edge material up to 1 mm - front and rear scissor capping - Base
item-No.: 139678031
-
2.250 €
country-de DE
- Hobelbreite 630 mm - 4 Messerwelle - motorischer Tischhub - stufenloser Vorschub - Gliederdruckbalken - 1 Tischwalze - Motor 6,6 kW
item-No.: 139678032
-
2.250 €
country-de DE
- Planing width 630 mm - 4 knife shaft - motortable stroke - infinitely variable feed - Link pressure bars - 1 table roller - Motor 6.6 kW
item-No.: 139678028
-
650 €
country-de DE
- Extension 750 mm - Table size 900 x 750 mm - max. 20000 rpm.
item-No.: 139678026
#908-660 KBA Rapida 74-4 PWHA Size: 52 x 74 cm Age: 2006 Imp.: 27 million Available: October Printing Thickness: 80 - 600 g/m2 - Semi Automatic Plate Change - Ink Temperature Control / Baldwin - Blanket and Impression Cylinder Wash Up Devicr - 2 x Dryer Grafix UV End Dryer - Autom. Size Setting in Feeder and Delivery - Lithek Densitometer - Powder Sprayer AP 232
item-No.: 139678023
-
550 €
country-de DE
Reihen -und Beschlagbohrmaschine - Bohrbalken mit 9 Spindeln, Teilung 32 mm - Bohrbalken mit 3 Spindeln für Beschläge
item-No.: 139678024
-
550 €
country-de DE
Rows and fitting drill - Drilling beams with 9 spindles, pitch 32 mm - Drilling beams with 3 spindles for fittings
item-No.: 139678022
-
252.000 €
country-de DE
C 110 Pos. 1 a 1 aseptic working Elopak filling machine int. No. II 103 manufacturer is comp.Shikoku, Japan Type: U-980 A Serial No. 455 Manufacturer year: 2007 with 3 different size of packaging, 0,5, 0,75 and 1,0 l Capacity: 11.000 E/h, juice filling. was working until to the end of January 2019 To the Elopak Line belongs following machines Single transport plant with 3 rows manufacturer is Polycetting, length from Elopak filling machine to the inlet of the Meuerer carton packaging machine ...
item-No.: 139674116
JSW 850TON WE HAVE JSWINJECTION MOLDING MACHINE, MODEL J850E(850TON), MFG.YEAR 1990 SCREW DIA. 110MM CLAMPING TYPE: TOGGLE TYPE MONITOR: WE HAD CHANGED THE MONITOR ( LANGUAGE IS ENGLISH ) THE CONDITION IS IN THE PRODUCTION. PLS. CONTACT G.J.CHOI IN KOREA HE CAN SERVE YOU AT ANY TIME.
item-No.: 139629227
-
6.200 €
country-de DE
Hackers, crushers, shredders for chipboard and solid wood Only 774 operating hours, i.e. about 10 minutes per day. A video of the running machine can be sent on request. Weima WLV 4 Funnel size, approx. 600 x 500 x 600mm Rotor length 600mm, rotor diameter 368mm Slow-moving water banks 90 rpm Drive motor 15kW Screen diameter top 15mm, bottom 12mm V-wave with 14 knives The knives have recently been completely renewed and can be turned three more times. Suction nozzle 200mm Manual CE mark Without t ...
item-No.: 139629224
-
2.800 €
country-it IT
Year 2012, 988,000 copies done Console with full color touch screen Scan 600x600 dpi or print 1200x1200 dpi Memory 384 Mb x 6 Max size A3 or 11"x17" Max print speed A 4 size : 60 pages/min in 4 colours Large capacity unit LU-202 (2,500 sheets 80 g/m2 ) Dehumid Heater HT-503 for LU-202 Paper type: Plain, Fine, Color Specific, Coated-GL, Coated-ML, Coated-GO, Coated-MO, Tab paper- from 60 to 300 g/m Power 220 volts, 50-60 Hz, Weight 353 Kgs. Many spare toners, Available immediately
item-No.: 139629223
-
14.900 €
country-de DE
Compact edge gluing machine Hebrock F 2 with guide and drawing blade. Only 860 hours, i.e. about 2 hours per week Edge staerke max. 2mm Factory tueckhoehe approx. 10 - 40mm Feed approx. 7m/min Laermschutzhaube extendable factory toct pad Suction connection 1 x 120mm Aggregates: Upper pressure manual adjustment with SIKO-Zaehler Inlet ruler manual adjustment with SIKO-Zaehler Edge staerke manual adjustment with SIKO-Zaehler Fuegefraesen with diafraesers Gluing part with automatic edge f ...
item-No.: 139629007
-
8.000 €
country-fr FR
Lagernummer 1105-02698 Maschinenart CNC Drehmaschine Fabrikat YANG Typ CK 5 Baujahr 1990 Steuerungsart CNC Lagerort FRANKREICH HAGUENAU Ursprungsland taiwan Lieferzeit sofort Frachtbasis EX WORK Technische Details Drehdurchmesser 720 mm Drehlänge 1100 mm Steuerung Fanuc OT Spindelbohrungsdurchmesser 102 mm Stangendurchlaß 91 Anzahl der gesteuerten Achsen 2 Drehzahlbereich 10 - 2500 U/min Antriebsleistung 22/26 kW Eilgangsgeschwindigkeit 12/8 m/min Anzahl der Aufnahmen ...
item-No.: 139629008
-
8.000 €
country-fr FR
Bearing number 1105-02698 Machine type CNC lathe Make YANG Type CK 5 Built in 1990 Control type CNC Storage location FRANCE HAGUENAU Country of origin taiwan Delivery time immediately Freight base EX WORK Technical details Turning diameter 720 mm Turning length 1100 mm Control Fanuc OT Spindle bore diameter 102 mm Rod passage 91 Number of controlled axes 2 Speed range 10 - 2500 rpm Drive power 22/26 kW Rapid speed 12/8 m/min Number of shots in the turret head 12 JAPANNE ...
item-No.: 139624638
High-performance column drilling machine Make: ALZMETALL Type: AB 4 SV Machine No: 16155 Built: 1982 Offer number: 18248 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Thread cutting device - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with pre-bedding - Level 1 50 - 175 rpm - Level 2 175 - 640 rpm - Level 3 100 - 350 rpm - Level 4 350 - 1280 r ...
item-No.: 139624637
Hochleistungs-Säulenbohrmaschine Fabrikat: ALZMETALL Typ: AB 4 SV Maschinen-Nr: 16155 Baujahr: 1982 Angebotsnummer: 18248 Technische Daten: - Bohrleistung in Stahl ST 60 40 mm - Bohrvermögen in Stahl ST 60 50 mm - Gewindeschneideinrichtung - Bohrspindelaufnahme MK 4 - Bohrspindelhub 180 mm - Bohrspindeldrehzahlen stufenlos regulierbar mit Vorgelege - Stufe 1 50 - 175 U/min - Stufe 2 175 - 640 U/mi ...
item-No.: 139624635
Elektro – Hydraulische - Rohrbiegemaschine mit Dornbiegeeinrichtung Fabrikat: TRACTO Typ: TUBOMAT 2060 Maschinen -Nr.: 626.5.96 Baujahr: 1996 Angebotsnummer: 18329 Technische Daten: - Biegeleistung: - Stahlrohr Ø 20 - 60 x 4 mm - Edelstahlrohr Ø 20 - 50 x 3 mm - max. Wiederstandmoment 6,2 cm - max. Biegewinkel 180 ° - max. Radius 125 mm - Biegegeschwindigkeit 8 sec - An ...
item-No.: 139624636
Electric - Hydraulic - Pipe bending machine with spine bending device Make: TRACTO Type: TUBOMAT 2060 Machines -No.: 626.5.96 Built: 1996 Offer number: 18329 Technical data: - Bending power: - Steel pipe 20 - 60 x 4 mm - Stainless steel pipe 20 - 50 x 3 mm - maximum resistance torque 6.2 cm - max. bending angle 180° - maximum radius 125 mm - Bending speed 8 sec - Drive 400 V / 3 kW - Space requirement approx. L 3900 x H 1300 x D 1000 mm - Weight approx. ...
item-No.: 139624630
SEYDELMANN K-326 - 325 liters - After renovation under warranty - With loading and unloading. - New all components - knives, bearings, sealants, engine, control etc. - 6 months warranty - documentation - Perfect condition We deal with used machines. We make them very accurate capital renovations. We are known for their precision. If you have any questions, please write or call: - biuro@kalteks.pl - 0048-604-500-592 ( de ) - 0048-531-900-299 ( eng )
item-No.: 139624628
Mot.- Rohrbiegemaschine Fabrikat: ERCOLINA Typ: Super Bender B Maschinen -Nr.: 494017 Baujahr: 1994 Angebotsnummer: 18230 Technische Daten: - Biegeleistung Rohr bei 45 kg / mm² bis Ø 42 X 3,5 mm - Vollmaterial bis 30 mm - Biegewinkel 0 - 180 ° - größter mittlerer Biegeradius Rm 225 mm - kleinster innerer Biegeradius Ri 10 mm - Antrieb 220 V - Platzbedarf ca. B 400 x H 950 x T 600  ...
item-No.: 139624629
Mot.- Pipe bending machine Make: ERCOLINA Type: Super Bender B Machines -No.: 494017 Built: 1994 Offer number: 18230 Technical data: - Bending capacity pipe at 45 kg / mm2 up to 42 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - largest medium bending radius Rm 225 mm - smallest inner bending radius Ri 10 mm - Drive 220 V - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with: - Bending angle preselection - Digi ...
item-No.: 139624627
1 bakery counter Fabr.: Walter Model: 3-2-1 Y.O.m.: 2016 In detail, it consists of: 1 cubic glass attachment 2 mini lighting panels LED lighting Adjustable intermediate floors 3 supports Length: 2.620 mm 1 counter front panel Length: 1.254 mm, smooth front panel 1 worktop with straight delivery On the operator side: bag bottom, for mounting separation sides Space between: 1 double socket 1 counter front panel Length: 2.230 mm smooth front panel 1 worktop for attachment or counter  ...
item-No.: 139624621
Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrat ...
item-No.: 139624618
Maschinenspezifikation Baujahr: 2006 Steuerungsart: Unilog B4 Spritzeinheit: .../2800 Schneckendurchmesser: 75 mm Spez. Spritzdruck: 1739 bar Spritzvolumen: 1657 ccm Spritzgewicht in PS: 1508 g Schließeinheit: TM 450/... Schliesskraft: 450 t Größe der Aufspannplatten: 1120 x 1120 mm Lichter Holmabstand: 800 x 800 mm Einbauhöhe: 300...770 mm Öffnungsweg: 760 mm Max. Plattenabstand: 1530 mm Auswerferweg: 250 mm Allgemeine Informationen: Lieferzeit: Kurzfristig Masse(m) Lx ...
item-No.: 139624619
Machine specification Year: 2006 Control unit: Unilog B4 Injection Unit: .../2800 Screw diameter: 75 mm Injection pressure: 1739 bar Injection volume: 1657 ccm Shot capacity: 1508 g Clamping Unit: TM 450/... Clamping force: 450 t Platen size: 1120 x 1120 mm Distance between tie bars: 800 x 800 mm Mould height: 300...770 mm Opening storke: 760 mm Max.Daylight: 1530 mm Ejector stroke: 250 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 8,26 x 1,79 x 2,3 ...
item-No.: 139624615
CNC thorn pipe bending machine, little used CNC pipe bending machine, little used Make/ make Transfluid Type / Model: DB 40168 Year built/ year: 2000/ overhauled/ overhauled 2017 CNC: Transfluid bending collision software "T Project Professional" incl. License key Transfluid bending soaftware "T Project Proffessional Anti collision" with li ...
item-No.: 139624612
-
49.000 €
country-se SE
Condition: Used Technical data: • overall dimensions 3445x2815x1600 mm; • bowl capacity 325 litres; • 6 knives; • power 97 kW; • power supply 400 V, 50 Hz; • filling amount 230 kg, depending on production; • capacity 1150 kg/h, depending on production; • knife shaft speeds cutting 500-4400 rpm; • knife shaft speeds mixing forward an reverse 50-500 rpm; • bowl speed 7-22 rpm; • hydraulic cover control; • vacuum pump excluded; • weight 5200 kg.
item-No.: 139624505
Drilling capacity: 22 mm Thread cutting power: M 12 Spindle: MK 2 Drilling depth: 80 mm Spindle speeds infinitely variable: 100 - 1800 rpm Table size: 350 x 255 mm Weight, approx.: 80 kg Mains connection: 230 volts Engine power: 0.9 kW Facilities: - Immediate spindle hold without follow-up - Thread cutting device - Stepless speed adjustment - Brushless DC motor - Digital speed display - Drilling depth stop - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivelle ...
item-No.: 139624503
item-No.: 139624396
Pelletizer type Buhler DPAA - compact pelletizer housing mounted on base frame - pelletizer door of stainless steel, powerful permanent magnet. - rotating the system with V-belt drive 160 kW - two-roller system (1 set on pelletizer) - the pelleting with internal dia. 660 mm and pelleting width 154 mm - 1 Automatic Greasing Unit for roller and rotor bearings (new) - greasing pump incl. 0.18 kW three-phase motor and 10 kg grease tank (new) - variable grease supply to greasing points with electrical control ...
item-No.: 139624392
-
55.000 £
country-ie IE
Kategorie: Spritzguss-Nr. NHersteller: Sandretto- und Modell: 6000/820-NAnzeige: Nach Vereinbarung zu prüfen: 2007-N-Schraubendurchmesser (mm): 93-R-NClamp-Kraft (t): 820.000.- In der Produktion: Ja-Nr.: Landkreis Sligo, Irland.
item-No.: 139624391
-
55.000 £
country-ie IE
Category: Injection Moulding Manufacturer: Sandretto Model: 6000/820 Viewing: Available to inspect by appointment Year: 2007 Screw Diameter (mm): 93 Clamp force (t): 820 Lead Time: Immediate Total Operational Hours: 11,483 In Production: Yes Location: County Sligo, Ireland.
item-No.: 139624388
Pelletizer type Buhler DPAA - compact pelletizer housing mounted on base frame - pelletizer door of stainless steel, powerful permanent magnet. - rotating the system with V-belt drive 160 kW - two-roller system (1 set on pelletizer) - the pelleting with internal dia. 660 mm and pelleting width 154 mm - 1 Automatic Greasing Unit for roller and rotor bearings (new) - greasing pump incl. 0.18 kW three-phase motor and 10 kg grease tank (new) - variable grease supply to greasing points with electrical control ...
item-No.: 139624384
Dry industrial vacuum cleaner - suction system Make: ESTA Type: DUSTOMAT 10 Machine No.: 34395 Built: 1998 Offer number: 13016 Technical data: - The industrial vacuum cleaner is suitable for - Intake of solid substances such as - for example, different dusts - or chips / sawdust - mobile version - maximum volume flow 720 m3/h - min. volume flow 565 m3/h - Filter area approx. 3.5 m2 - Boiler volume approx. 100 L - Inlet 100 mm - Polyurethane hose approx. 1500 ...
item-No.: 139624382
Type 1,5 Fabrication-No. 12303 for one pallet good condition
item-No.: 139624379
Taurus pellet mill | excellent design based on 30 years of knowledge Over the past 30 years, our company has gained tremendous knowledge and experience in the day-to-day operation and maintenance of all types of pellet mills. During that time, we saw a clear need for further improvement of these machines in the animal feed, biomass and recycling industries, so we drew on our extensive knowledge of pellet mill refurbishment to develop a new pellet mill. Our goal was to develop a pellet mill suitable for pellet ...
item-No.: 139624380
Specifications: Size: (length x width x height) :1,700mm x 2,000mm x 2,000mm Weight (inclusive rollers and the):10,100 kg Paint RAL: Black: 9005 Orange: 2008 Silver grey: 2007 Motor (IE3) :2 x 132 kW : 980 / rpm : 3x 400/690V 50Hz Shaft & rear plate (one piece) : x 200mm / 42cRM04 Bearings [SKF] : Front: NU 23240 cc/w32 Rear: NU 23236 cc/w33 Rotor pulley : x 1400mm Motor pulley : x 220mm Rotation Rotor: 154 rpm-6.85 meters / sec
item-No.: 139624378
Hydr.-Lochstanze Make: BOSCHERT Type: EL 500 Machine No: 231 Built: 1996 Offer number: 19324 Technical data: - Printing capacity 200 KN - maximum sheet thickness 6 mm - max. punching diameter 105 mm - Stroke infinitely adjustable 0 - 25 mm - Extension 540 mm - largest stroke number approx. 150 h/min - Working range 500 x 1000 mm - maximum sheet metal size with turnover 1000 x 2000 mm - Drive 400 V / 3 kW - Space requirement approx. W 2200 x H 1450 x D 1 ...
item-No.: 139624376
-
12 €
country-de DE
We offer you a used post protection here manufacturer BITO (PRO). The stand protectors are designed for a Frame profile width of 80 mm. Included in the scope of delivery are: 01x Post protection, used Material color: yellow f. Stand profile width: approx. 80 mm Total height: approx. 715 mm Total width: approx. 90 mm Inner width: approx. 82 mm Total depth: approx. 70 mm Height designion: approx. 40 mm Material thickness: approx. 4 mm Hole grid: approx. 50 mm Hole ...
item-No.: 139624374
Ultrasonic cleaning device Make: GTB. Type: USW 30 T Machine no: 07-10-01091 Built: 2010 Offer number: 19067 Technical data: - Usable space dimension approx. W 500 x D 300 x H 250 mm - Filling quantity 37.5 l - Ultrasonic ice 0.9 kW - Heating capacity 2.2 kW - Timer - Parts basket - Liquid drain valve - electr. Connection 220 V / 16 A - Table base H 600 mm - Space requirement approx. W 1300 x H 1100 x D 620 mm - Weight approx. 100 kg ...
item-No.: 139624372
-
ON Price
country-de DE
Due to relocation and warehouse dissolution, we sell numerous color copying systems from insolvency and leasing return. Some of them are current or newer copiers from various manufacturers, such as: Konica Minolta, Xerox, Sharp, Oki, Kyocera, Olivetti and many more. We also sell various servers, computers, network accessories, consumables and spare parts. Below you will see only a brief compilation: 4x Konica Minolta Bizhub C227, 3x Konica Minolta Bizhub C220, 1x Konica Minolta Bizhub C224e, 1x Konica Minolta ...
item-No.: 139624369
-
15.000 €
country-se SE
Condition: Fully Checked/Working Technical data: • overall dimensions 3600x1800x2260 mm; • fully stainless steel machine; • power 12/20 A; • power supply 380 V, 50 Hz; • cross section of the cutting chamber 130x130 mm; • cross knife; • loading device for standard 200 litres bins; • including the pallet with extra grids; • weight 360 kg.
item-No.: 139624368
Gallus EMS410, Servo Year 2007 Web Width 410mm 8 Colours Unwind With Roll Lifter Web Guide Splice Table Full GEW UV + 4 Hot Air 2 x The Stations De/Re-Lam 2 x Hot Foiling Units Turn Bar Rewind Waste Rewind Counter 2 x Silk Screen Units Second Pass Facility Video Web Inspection printing cylinders 120
item-No.: 139624366
-
BN 11.490 €
country-at AT
Compact deduster - stable panel construction made of galvanized steel sheet - mobile on steering wheels - generous maintenance opening for raw gas area - Filter material with BIA test cat. "M" - Automatic extinguishing via temperature message (70° Celsius) - Automatic jet cleaning - Filter monitoring - Filling bin mobile with pickled chip bag and sight glass - Ready-to-plug with automatic start-up for a maximum of 8 machines
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)