Your found location: Latitude 0.0 + Longitude 0.0
drive motors
date: 13.11.2024 add to watchlist
Machine: TWIN DISC MG514 Marine transmission
item-No.: 160072919
used
Price: 4.290 €

TWIN DISC MG514 marine transmission was built in Belgium. The device working with high- or medium-speed diesel engines used in, for example, tugs or ferries, optimises the control of engine power to increase overall cost-effectiveness, productivity and boat performance. The TWIN DISC MG-514 transmission operates at a rotational speed of 1800 rpm with a ratio of 2.00:1 and has 360 HP of power. The machine comes from an engine in very good condition with which it has worked for a small amount of time. The offered device is fully complete. The total weight of the machine is 525 kg. Technical data of the TWIN DISC MG514 transmission - ratio: 2.00:1 - power: 360 HP - maximum rotational speed: 1800 rpm - oil capacity: 23 l - minimum oil pressure while cruising: 13 bar - overall dimensions (L x W x H): 80 x 80 x 80 cm - total weight of MG514 machine: 525 kg

drive motors
date: 13.11.2024 add to watchlist
Machine: TWIN DISC MG514 Transmission
item-No.: 160072927
used
Price: 4.290 €

TWIN DISC MG514 transmission was manufactured in Belgium. Used on high- or medium-speed diesel engines, the machine significantly increases overall boat efficiency and productivity by optimising the control of engine power. The offered TWIN DISC MG-514 marine transmission with a power of 360 HP operates at a rotational speed of 1800 rpm and has a ratio of 2.00:1. A fully complete machine with low mileage, has been used on an engine in very good condition. The total weight of the machine is 525 kg. Technical specifications of the TWIN DISC MG514 marine transmission - ratio: 2.00:1 - power: 360 HP - speed: 1800 rpm - oil capacity: 23 l - minimum oil pressure while cruising: 13 bar - dimensions (L x W x H): 80 x 80 x 80 cm - weight of the MG514 machine: 525 kg

drive motors
date: 11.11.2024 add to watchlist
Machine: SEW-EURODRIVE 18,5 kW Slip-on gear motors (4 S
item-No.: 164485828
New in: 2010
used

TECHNICAL SPECIFICATIONS Manufacturer: SEW-EURODRIVE Description: Slip-on gear motors Available units: 4 pcs. Rated power: 18.5 kW Rated speed: 1470/66 r/min Rated current: 35.50/20.5 A Rated Voltage (Volts): 380-420 Δ /660-725Y Nominal frequency: 50 Hz Power factor: Cos φ 0.85 Degree of protection: IP 55 Thermal Class: 130 (B) Efficiency: eff. % 91.7 1E2 SPECIFIC COMMENT - Motors were used in pairs to operate a conveyor belt - Year of construction approx. 2010 - Engines were used for about 1 year - Dismantled and ready for loading

drive motors
date: 08.11.2024 add to watchlist
Machine: WALTHER FLENDER MBH 125CC-B 27.7/1 Flender gear motor
item-No.: 161190837
used

Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives ! available Very good condition, straight from production!

drive motors
date: 07.10.2024 add to watchlist
Machine: WITTENSTEIN SPK+100S-MF3-500-0E1-1S11, hypoid gear, I=500,
item-No.: 162496912
used
Price: 1.990 €

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

drive motors
date: 01.10.2024 add to watchlist
Machine: EAGLE 1 :  85 Transmission
item-No.: 160053231
New in: 1996
used

Eagle Gearbox Reduction : i = 1 : 85 Dimensions : 1100 mm x 800 mm x 400 mm Outgoing shaft : avm. 50 mm, with pulley SPC 400-3 Incoming shaft : avm. 100 mm, with clamping bushing

drive motors
date: 01.10.2024 add to watchlist
Machine: RADICON BU 12 Worm drive
item-No.: 160053233
New in: 1985
used

Radicon worm gear Type : BU 12 Ratio : 30 : 1

drive motors
date: 16.09.2024 add to watchlist
Machine: SEW EURODRIVE RF 47 DT90L4/BMG/MM15 Gearmotor
item-No.: 140809107
new

SEW Eurodrive Motor SEW RF 47 DT90L4/BMG/MM15

drive motors
date: 12.09.2024 add to watchlist
Machine: RTZ ANTRIEBSTECHNIK FRT 50/B3 1/7 IEC80/B14 Gear Motor 1.5 kW Gear Ratio 1/7
item-No.: 164804882
used
Price: 50 €

Gear Motor, Electric Motor, Electric Gear Motor Power: 1.5 kW Gear Ratio: 1/7 Speed (motor): 1400 rpm. Output speed (gearbox): 200 rpm.

drive motors
date: 09.09.2024 add to watchlist
Machine: STÖBER R25-2038-110-2 infinitely variable gear motor
item-No.: 161092527
used
Price: 490 €

technical details gearbox: - Speed range output shaft: 18 - 49 rpm - Torque: 10.5 mkp = 103 Nm - infinitely adjustable via handwheel Technical data engine: - Manufacturer: BBC / YQU 80 MC 2a - Number: GS 608117 - 33 - Voltage: 380/200 V - Current: 2.6/4.5 A - Frequency: 50 Hz - Power: 1.1 kW - Cos φ: 0.86 - Speed: 2,860 rpm - Total weight: 40 kg - Dimensions: 600 x 280 mm - Hole dimensions base plate: 90 mm longitudinal / 140 mm wide - Transport dimensions: 700 x 450 mm (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

drive motors
date: 21.08.2024 add to watchlist
Machine: SPICER 3019FMHR24341-110 Powershift Transmission
item-No.: 156332135
new
Price: 6.700 €

Spicer Powershift Transmission 3019FMHR24341-110 This 3-speed powershift transmission is designed to handle heavy-duty applications, including lift trucks; rough terrain lift trucks; front end loaders; rough terrain cranes; and other mining, construction, and industrial machinery. PDF brochure laitetori.fi/site/assets/files/7111/spicer_vaihdelaatikko.pdf Transport weight 438kg

drive motors
date: 19.08.2024 add to watchlist
Machine: TOS ZNOJMO Variator VA31B101-72 Gearbox / Variator
item-No.: 129522953
new
Price: 790 €

Continuously variable speed gearbox, Variator VA31B101-72, Tos Znojmo, new Mechanical chain variator with stepless, electrical change of the ratio. - sufficiently large control range, - minimum maintenance requirements and - a simple operation Technical specifications: Drive speed: 950 rpm, Abtirebsdrehzahl: 448 to 2016 rpm Power: 2.85 to 5KW Torque: 60 to 24Nm Length: 660mm, width: 400mm, height: 580mm Weight: 145 kg State: The gearbox is brand new and was in stock as a spare part. Original packed

drive motors
date: 15.07.2024 add to watchlist
Machine: AVK / SIEMENS DSG62L-4 Motor-Generator Set
item-No.: 160067438
New in: 2002
used

Application: mechanical conversion of different frequencies Generator by AVK Type: DSG62L-4 Year of construction: 2002 Current type: AC Voltage: 1000/577 V Current: 577/1000 A Power: 1000 kVA Motor from Siemens Voltage: 500 V Current: 430 A Frequency: 50 Hz Speed: 1488 rpm

drive motors
date: 12.07.2024 add to watchlist
Machine: ERAG SKF Geared motor
item-No.: 157928550
used
Price: 230 €

Gear motor Erag AG SKF 0.25 kW 1390 rpm Reduction ratio 1 : 80 Output speed 17 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

drive motors
date: 12.07.2024 add to watchlist
Machine: LENZE  Geared motor
item-No.: 157928561
used
Price: 270 €

Gear motor Lenze Gear ratio 1:20.044 Power 1.5 kW Engine speed 3450 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

drive motors
date: 31.05.2024 add to watchlist
Machine: LENZE  geared motor
item-No.: 153869765
used
Price: 160 €

Gear motor Lenze Flange gear motor, shaft diameter 25 mm Wavelength 50 mm 1.5 kW Reduction 20.04 Output speed 172.1 In good condition, ready for use Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

drive motors
date: 21.05.2024 add to watchlist
Machine: SEW EURODRIVE R97 DRN90L4/BE2, 20rpm, 1,5KW, Geared motor
item-No.: 160204582
new
Price: 1.450 €

Gear motor, R97 DRN90L4/BE2, 20rpm, 1,5KW, SEW Eurodrive, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. - 1461/20 rpm I=72,17 - 1,5 KW, 230/400 V - 710 Nm - Shaft D60mm x 115mm - 85 x 35 x 38cm high, 131 kg - Year of manufacture 2019 Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

drive motors
date: 21.05.2024 add to watchlist
Machine: WITTENSTEIN SP 140S-MF1-7  -2K1-2S, I=7, Servo planetary gearbox Alpha,
item-No.: 160203340
new
Price: 785 €

Servo planetary gear alpha, SP 140S-MF1-7 -2K1-2S, I=7, Wittenstein, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. - for Shaft D38mm, - centering D130mm - I=7 Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

drive motors
date: 21.05.2024 add to watchlist
Machine: REXROTH VNK2A 251, 6-49Nm, Offset downforce,
item-No.: 160203341
new
Price: 785 €

Offset downforce, VNK2A 251, 6-49Nm, Bosch Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Tool holder 1/2" square 6-49Nm, Max. 1000rpm Maintenance free for 1 million full load cycles Rexroth No. 0608800633 For screw solutions Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

drive motors
date: 21.05.2024 add to watchlist
Machine: LENZE G50BB124MHAR2C, 401r/min, 68Nm Bevel gear motor,
item-No.: 158733882
new
Price: 750 €

Bevel gear motor, G50BB124MHAR2C, 401r/min, 68Nm, Lenze, mint condition If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part was disassembled from a new unit that was not put into operation. - Bevel gear motor G50BB124MHAR2C, 401r/min, 68Nm, I=3,565 - Motor MDEMABS100 32C0C, 0,55KW, 1430r/min, - Bore for shaft D30mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.