38 results
similar results found in category pumps
item-No.: 134608343
BG
1 horizontal pump type HPK 200/560
Year built: 2008
Capacity: 550 m³/h
Delivery head: 26 m Fl.S.
Motor rating: 90 kW
Pump speed: 810 upm
Lining material: Hawiflex H 3807-01
Shaft sealing: mechanical seal
Type of coupling: V-Belt
Condition: used and repaired
Extras: incl. motor
item-No.: 133790680
NL
Used hydro unit = consisting of a Rexroth A4VG250 pump and a DAF WS242
motor
Please contact us regarding pricing and availability.
item-No.: 132733911
ES
Jenbacher 416 GS
Power = 1161KW
YOM = 2007
Working hours = 21.000h
Out Voltage = 400V
Auxiliary equipment included
Coolers
Pumps
Switch breaker...
item-No.: 132733910
2 x Jenbacher 312 and auxiliary equipment.
YOM = 2007
Working hours = 50.000h
Output Power = 500Kw
Output Voltage = 400V
Auxiliary equipment included
Coolers
Pumps
Switch breaker...
item-No.: 132632414
US
120 MW LM6000 PC Gas Turbine Power Plant
120 MW LM6000 PC combined cycle power plant consists of (2) 47 MW
LM6000 PC Gas Turbines, Year 2007, 50 HZ, 11.5KV. HRSG, Steam Turbine,
electrical systems, control systems, air system, cooling system,
starting system, lubricating system, air compressors,
demineralization unit, switch room, transformers, pumps and much more.
The LM6000 PC gas turbine power plant is a complete plant that has
been well maintained since installation on site. Can be seen in
operation.
item-No.: 131942034
SHODA-CNC Router (6) main heads-(6) piggy back heads- model NC
516-1326,
(2) 51x102 vacuum tables- 15M FANUC Controller, twin 7
½ hp.
vacuum pumps, 1995 very low hours,
……….…………..Price-$19,000
item-No.: 131881697
Machine dimensions / mm
L3830xA1200xH2020
Working height
900-950 mm. adjustable
Approximate weight
1350Kg
Maximum film width
520 mm
Maximum bobbin diameter
350 mm.
Diameter mandrel / mm
76 mm.
Output height of product
600-700 mm. adjustable
Output ribbon width
680 mm.
GENERAL CHARACTERISTICS
- Structure in stainless steel AISI 304
- Air cooling
- Trays drag by stainless steel rods and dragged by chains -
Adjustable chain speed with exit and stop ramp
- Cycles / min: 6-10 according to pumps
...
item-No.: 131839512
C.M.S. CNC Turret Head Machining Center
Model TRIAX R-65
Sn 285, 1986
IBH controller modus 1
(2) vacuum tables- each 48” deep x 60” long.
(1) five station lathe section. Max. part 6.5” x 45”
(2) vacuum pumps 5 hp. each.
Total of (30) routers.
(6) station turret with (5) routers per station.
Consisting of;
(2) stations of (5) routers each - 2 ½ hp. each.
(4) stations of (5) routers each – 8 hp. each.
Digitizing table for flat work or carving.
Lathe s ...
item-No.: 125971231
2 COGENERATION ENGINES: 2 X CATERPILLAR G3516 YEAR OF MANUFACTURE:
1997
HOURS: 18.520/20.115 OUTPUT: 1011kW
ALTERNATOR: SR - 4B
COMPLETE PLANT
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Control Panels generator
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
...
item-No.: 125465393
2 COGENERATION ENGINES: 2 X MWM-DEUTZ V12 TBD620
YEAR OF MANUFACTURE: 1999
HOURS: approx. 9000 OUTPUT: 1.3Mw
ALTERNATOR: LEROY SOMER
OUTPUT: 1260 KW / kVA 1300
COMPLETE PLANT •Generator (alternator, engine engine and PLC)
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Control Panels generator (DIANE)
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
...
item-No.: 125086228
1 ENGINE COGENERATION: 1 x JENBACHER J612 C02
YEAR OF MANUFACTURING: 1999 - OVERHAULED 2011
OUTPUT: 1494 Kw
HOURS: approx. 4000
GENERATOR: STAMFORD
OUTPUT: 1840 KvA
The scope of supply is the following:
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Control Panels generator (DIANE)
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
•Silencer a ...
item-No.: 125086225
2. ENGINE COGENERATION: 2 x JENBACHER J612 C02
YEAR OF MANUFACTURING: 1999
OUTPUT: 1464 Kw
HOURS: approx. 25,000
GENERATOR: STAMFORD
OUTPUT: 1840 KvA
The scope of supply is the following:
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Control Panels generator (DIANE)
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
•Silencer and y-pype ...
item-No.: 123937933
complete system with Dietz-Motoren year 2013 new unused
item-No.: 123726215
You offer to a fully functional, used KSB high pressure rotor pump
Technical data:
Type: KSB MTC A 32 / 10C.
Xvlnmvsqs
Flow rate: 5, 99 m³/h
Delivery height: 251, 69 m
Speed: 2940 u/min
item-No.: 123726207
On a completely functional, used Warman pumps housing of the types
they offer 300 LPT SHG in mint condition.
Wsqfndjon
If you are interested please contact us either via email or via a
private message. The shipping and payment processing will be set then.
item-No.: 123726205
On a completely functional, used Warman slurry pump of the types they
offer 300 LPT SHG in mint condition.
Technical data:
Main dimensions and properties Wspwzzvy3
Year of construction: 2008
Condition: Used type: gravel dredger pump brand / model: Warman
suction diameter: 406.4 mm 16 inch shaft: GG wave extra strong
item-No.: 123726182
They provide a fully functional, used KSB ETANORM centrifugal pump.
Technical data:
Power: 55kW
Flow rate: 200m ³/h
Srykaw
Head: 94 m
Speed: 2900 RPM
Year of construction: 2000
Height: 210cm
item-No.: 123726122
They offer bearing bracket 14/12 GG G on a completely functional, used
Warman in mint condition of the types
Emob9ujts
Year of construction: 2006
If you are interested please contact us either via email or via a
private message. The shipping and payment processing will be set then.
item-No.: 123726120
You are bidding on a fully functional, used Warman in mint condition
of the type 14/12 GG bracket
Ev9lfwh
Year of manufacture: 2009
If you are interested please contact us either via email or via a
private message. The shipping and payment processing will be set then.
item-No.: 121632751
MTU ENGINE 4000 L61 GAS
OUTPUT: 1164 kW YEAR OF MANUFACTURING: 2005
HOURS: 45,326
GENERATOR: STAMFORD
OUTPUT: 1550 KVA - 400V AC
SCOPE OF SUPPLY
The following are integral parts of generators and groups needed for
its implementation (gas inlet, outlet energy):
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Starting System
•Control Panels generator
•Electrical control pan ...
item-No.: 121470967
Powder, liquid and solid detergent and soap production. Versatile
plant: it can be adapted to produce base material for animal feed and
biodiesel.
This plant consists of the following machines:
-20.000 liters capacity reactor
-5,000 liter capacity reactor
-Spray dryer
-Additives mixer. 600 liters
-Basic soap, additives and colour & perfums injectors Mixer. 2000
liters
-SIGMA Linear multiblades mixer with speed variator and weight
sensors
- Vacuum pumps for the transfer of basic ph.
-Silos with cap ...
item-No.: 121098263
2 COGENERATION ENGINES: 2 X JENBACHER JMS 320 GS-N. LC
YEAR OF MANUFACTURE: 1996 / 1998
HOURS: 49768 / 36634
OUTPUT: 950KW / 995KW
ALTERNATOR: STAMFORD
OUTPUT: 1064 KW / kVA 1330
VOLTAGE: 415 V AC 3 Phase
COMPLETE PLANT
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Control Panels generator (DIANE)
•Electrical control panel accessories (pumps, etc)
•Technical Documenta ...
item-No.: 120917214
BR
With 18-cylinder V-powered natural gas engine ROLLS ROYCE
With 02 centrifugal pumps KSB, 80-250F and electric motor weg of 10
cv
With 02 centrifugal fans Bernauer, with electric motor of 50 hp
With 02 Somax mufflers with rock wool, dim. 2500x2100 mm
item-No.: 114541614
PT
1 STERLING STERLCO used diathermic oil boiler with electric heating
type S-9026-J0
serial nr. 95E5517
Dual zone
Heating Capacity Zone 1: 18 KW
Heating Capacity Zone 2: 36 KW
Total Heating Capacity: 54 KW
Pump Motor (Zone 1): 1.5 KW / 2 HP
Pump Motor (Zone 2): 1.5 KW / 2 HP
complete with circulation pumps and high accurency temperature
controlers
1" oil circulation pipes (up to 110 L/min)
1" vent pipes (up to 110 L/min)
item-No.: 93048700
Large sale of processing and packaging machinery for the bakery,
biscuit and confectionery industries. All machines are being sold on
an ‘as seen’ basis at attractive prices. Please contact us for
more information.
Bakery Processing Machines
• Egg breakers and separators (4 available)
• Nut blancher, all stainless steel, (2 available)
• Selection of mills, cutters, and kibblers
• Selection of dough mixers
• Granite 3-roll refiners (5 available)
• Nut roasters (2 available)
Jam ...
item-No.: 75250400
SE
Used Stationary concrete pump SUMAB P 90. Very good condition.
The pump is designed at 1 axxle with 2 single tires.
Main pump specifications:
Capacity: Rod side-100 m3/hr at 70 bar
Piston side-65 m3/hr at 110 bar.
Hydraulic pump: KAWASAKI-K3V180S. Capacity 350 kg/cm2.
Wire remote control. Main hopper 600 l. 2 motors on hopper for
concrete mixer.
Scandinavian & UK Machines offers stationary and boom concrete pump of
different models and capacities. High quality together with a very
good prices cre ...
item-No.: 58751717
Stationary concrete pump SUMAB P 90
Used Stationary concrete pump SUMAB P 90. Very good condition.
The pump designed at 1 axxle with 2 single tires.
Main pump specifications:
Maximum Capacity: 64 m3/hr at 110 bar.
Hydraulic pump: KAWASAKI-K3V180S. Capacity 350 kg/cm2.
Wire remote control. Main hopper 600 l. 2 motors on hopper for
concrete mixer.
Scandinavian & UK Machines offers stationary and boom concrete pumps
of different models and capacities. High quality together with a very
good pri ...
item-No.: 58751715
Boom concrete pump SUMAB P 31.
Used boom concrete pump SUMAB P 31. Good condition.
It has maneuverable boom 30.4 m. height. R-shaped type, and also an
advanced hydraulic system with manual control. Universal, and the
optimal solution of the majority of construction problems.
Boom Specification:
Vertical Reach: 30.4 M.
Horizontal Reach: 26.5 M.
Reach From Front of Truck 23.6 M
Unfolding Height 6.0 M
Section Articulation 92° / 180° / 230° /180° /235°
Rotation 370°
Pump Specifications:
...
item-No.: 19625474
FR
Myers (Calder) 80 bar pressure pump.
A complete used pump with electric motor + a revised pump.
item-No.: 12978184
DE
Centrifugal pump
Manufacturer: Hilge
Type: Hygia CN II/60 d
Multistage, normal-priming centrifugal pump designed according to
criteria of hygiene and food technology. CIP and SIP capable in
accordance with the performance criteria for pumps contained in DIN
12462.
The pump is used preferably in the brewery and beverage technology,
processed milk farms, in food process engineering, in CIP cleaning
systems, in the pharmaceutical industry, medical technology, and
process equipment of the cosmetics industry. Further ...
item-No.: 12778700
Horizontal, self-priming centrifugal pump in outlining housing design
closed type impellers with a suction level
Manufacturer: Siemen & Hinsch GmbH
Type: TKHA
Technical data:
Flow: up to 350 m ³/h
Head: up to 185 m
Speed: Max 3600 1/min
Temperature: maximum 120 ° C
Casing pressure: up to 16 bar
Shaft seal: Gland, mechanical seal
Materials: cast iron, bronze, stainless steel
Description:
The suction level is located on the suction side. It is parallel to
the first orientation of liquid level ...
item-No.: 12376007
Submersible pump
Manufacturer: Netzsch
Type: 4NT04
Length: approx. 1,80 m
Characteristics of the immersion pump
-insensitive to Sandy shares in the pumped liquid
-pulsation promotion
-very high suction capacity
The immersion pump offers you:
-low life cycle costs
-high pressure stability
-exact dosing accuracy
Advantages of the immersion pump
-Operation possible at high water content in oil
-Reliability for oils with high viscosity
-ready to use media with high fixed material freight
Submersible pump is st ...
item-No.: 11741235
item-No.: 8498471
Materials:
Housing: 1.4581
Wheels: 1.4408 wave: 1.4571
Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton
Model A6:
Pump on base plate mounted
elastic coupled with 1.35 kW
IEC standard motor, three-phase
Pressure: 2 bar
Revolutions: approx. 1,450 U/min
Output: 1,200 l / h
Mains frequency: 50 Hz
Engine power: 230/400 V
Protection class: IP 55 protection class: E ex eII T3
Design: B3
Pump partially unused in excellent condition!
item-No.: 7740671
AT
Sell used hydraulic power units 5.
3 with 11 kW electric motor-
2 with 4 kW electric motor-
Price per PCs.
Motors from ASEA Sweden
item-No.: 134675029
180 €
Weight approx.: 90 kgDimensions (l x w x h) approx.: 1200 x 800 x 800
mmDescription: ? Lot of 2 submersible water pumps ? Motor 1.50 kw each
item-No.: 134491245
Weight approx.: 60 kgDimensions (l x w x h) approx.: 1370 x 800 x 500
mmDescription: Lot of 2 oil / gas oil extraction pumps With manual
crank for liquid extraction For more information see photos.
item-No.: 133704536
Weight approx.: 2000 kgDimensions (l x w x h) approx.: 2200 x 2600 x
1500 mmDescription: VALTORTA Roller coater Serial number 102 Machine
to perfectly fill the pore on flat surfaces of wood, fibreboard or
similar with base coatings Working width 1250 mm Transport width 1290
mm 2 rubberized coating roller of 240 mm diameter 2 iron rollers of
160 mm diameter 2 independent feeding pumps (one for each group)
