sheet metal working used for sale (3,218)

weight of the machine ca.:620 kgdimensions of the machine ca.:1000 x 920 x 1550 mm

sheet width: 6200 mmplate thickness: 8 mmthroat: 60 mmdistance between columns: 6400 mmcutting angle adjustment: 0,5 bis 2 °total power requirement: 13 kWweight of the machine ca.: 19 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,25 mmworking length: 8100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: / mmcoil weight: / tcoil internal dia.: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 500 mmplate thickness: 0,8 - 5 mmno. of straightening rolls: 7 straightening roll diameter: 80 mm2 pinch rolls, diameter: 80 mmAdjustable entry heightPass line: 505 mmOiling systemRoller cageStrip guide: 505 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard Configuration? Closed machine frame with integrated laser unit? Laser unit: CO2 laser TLF 5000, radio-frequency excited, chiller, logbook function Laser? Automatic pallet changer and longitudinal conveyor for small parts / slag? Drives: Gantry drive in combination with linear direct drives? Laser power control? HI-LAS high pressure cutting? Plasma sensor system PSS? PCS Process Control System? DIAS capacitive height regulation? High-speed processing with SprintLas? ContourLas for producing small holes? Programmable cutting gas pressure setting? Automatic nozzle cleaning? Laser cutting head with 5? lens and laser cutting head with 7.5? lens? Cutting head quick-change device? Automatic sheet edge detection? Positioning laser diode? Programmable power cycles? Microweld? Automatic focus adjustment AutoLas Plus? Oil spray device for reliable thick plate machining? Automatic shutdown ...

Standard configurationMachine? Closed machine frame with integrated laser unit? Motion unit for high precision processing? Gantry drive in combination with direct linear drives? Automatic pallet changer? Longitudinal conveyor? Enclosed beam delivery system? One cutting head strategy? Working area lighting? Positioning laser diode? Spray device? PierceLine? FocusLine? NitroLine? PlasmaLineTrumpf Laser? CO2-Laser TruFlow 6000 with optimized stand-by mode? Maintenance-free radial turbine blowers? Radio-frequency excitation? Laser control TASC 3? Laser power control? Logbook function LaserLaser cutting head? Laser cutting head with 250 mm lens? Universal quick-change device UTI ? LensLine with condition checking? ControlLine: Height regulation and sheet edge sensingControl? SIEMENS Sinumerik 840D? Technology data is integrated? Colour screen? Automatic shutdown? Programmable cutting gas pres ...

Standard ConfigurationMachine? Closed machine frame with integrated laser unit? Motion unit for high precision processing? Torque drive in combination with direct linear drives? Enclosed beam delivery system? Chiller? Automatic pallet changer lengthwise installation? Longitudinal conveyor? 17 touch screen? Working area lighting? Positioning laser diode? Spray device? PierceLine? FocusLine? PlasmaLineTrumpf Laser? CO2-Laser TruFlow 3200 including NitroLine, with optimized Standby Modus? beam tube purge with nitrogen? Maintenance-free radial turbine blower? Radio-frequency excitation? Laser control TASC 3? Laser power control? Logbook function Laser? Laser cutting head? One cutting head strategy? LensLine with status check? Laser cutting head with 250 mm lens? Universal quick-change device (UTI)? ControlLine: Height regulation and sheet edge detectionControl? Sinumerik 840D SL ? Integrated ...

Standard ConfigurationMachine ? Closed machine frame? Integrated cabinet? Motion unit for high precision processing? Torque drive in combination with direct linear drives? Chiller? Automatic pallet changer lengthwise installation? Enclosed beam delivery via laser light cable? Integrated electrical cabinets with inside light? Wide longitudinal conveyor? Ergonomic control panel with Touchscreen? Work area lighting? Positioning laser diode? Spray device? PierceLine ? FocusLine? NitroLine? PlasmaLine? Automatic nozzle cleaningTRUMPF laser? External solid state laser TruDisk 4001 with 1 fiber optic cable laser output? Stimulation via pump diodes? Laser power controlCutting head ? Universal cutting unit? One cutting head strategy? Protection glass to avoid lens contamination? Online protection glass monitoring? ControlLineControl ? Easy shop floor programming? Fast post production? Control Sin ...

Standard configurationMachine? Closed machine frame with integrated laser unit? Motion unit for high precision processing? Torque drive in combination with direct linear drives? Enclosed beam delivery system? One cutting head strategy? Chiller? Automatic pallet changer, lengthwise installation? Longitudinal conveyor? Ergonomic control panel with Touchscreen? Working area lighting? Positioning laser diode? Spray device? PierceLine? FocusLine? NitroLine? PlasmaLineTrumpf Laser? CO2-Laser TruFlow 3200 with optimized standby ? Maintenance-free radial turbine blower? Radio-frequency excitation? Gas mixer (integrated)? Laser control TASC ? Laser power control? Logbook function LaserLaser cutting head? Laser cutting head with 250 mm lens? Universal quick-change device (UTI) incl. bus connection? LensLine ? ControlLine: Height regulation and sheet edge detectionControl? Sinumerik 840D SL contro ...

Standard Configuration? Stable C-frame? Coordinate guide with integrated linear magazine, 19 tool stations,2 clamps? Drives: Maintenance-free, three-phase servo motors? Programmable presser foot for repositioning with preselectable pressing force? Sensor-monitored part chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute? 2 good parts containers? Laser unit: CO2 laser TLF2700, radio-frequency excited, insulated against vibrations, integrated in machine frame, incl. chiller, and laser control DIAS 3? High speed processing with SprintLas? ContourLas for producing small holes? Programmable cutting gas pressure setting? Punch stroke / thread counter? Laser cutting head: 5? lens, quick-change device, height regulation APC? Additional laser cutting head with 7.5? lens? Punching head: Hydraulic single tool adapter, 360? rotation of all tools, automatic tool l ...

AutomationLiftMaster CompactLoading max. sheet format 3000 x 1500 mmmin. sheet format 1000 x 1000 mmmax. sheet thickness 25 mmmax. sheet weight 900 kgUnloading min. parts size 150 x 150 mmmax. sheet thickness 25 mmmax. sheet weight 900 kgBasic system incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake, incl. loading / unpacking stationBasic configuration:? synchronous loader? peeling device? measuring device for thick sheets? movable unloading rake? raw material unpacking station? maximal stack height on loading side is 90 mm? maximal stack height on unloading side is 250 mmLiftMaster Compact options? Additional pallet for finished parts? Separation of thin sheets (s=1-2 mm)? Scraper for slats (cleaning brush)? Storage interface

Standard configuration? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 6000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function? Automatic pallet changer and longitudinal conveyor for small parts / slag? Drives: Gantry drive in combination with linear direct drives ? HI-LAS high pressure cutting? Plasma sensor system PSS? Automatic sheet edge detection? APC Advanced Process Control? PCS Process Control System? Programmable power cycles? Microweld? Automatic nozzle cleaning? High-speed processing with SprintLas? ContourLas for producing small holes? Programmable cutting gas pressure setting? Laser cutting head with 5? lens and laser cutting head with 7,5? lens (for TLF 6000)? Cutting head quick-change device? Positioning laser diode ? Automatic focus setting AutoLas Plus? Laser power control? Oil spray device for reliable ...

Standard configurationMachine? Closed machine frame with integrated laser unit? Motion unit for high precision processing? Torque drive in combination with direct linear drives? Enclosed beam delivery system? One cutting head strategy? Chiller? Automatic pallet changer, lengthwise installation? Longitudinal conveyor? Ergonomic control panel with Touchscreen? Working area lighting? Positioning laser diode? Spray device? PierceLine? FocusLine? NitroLine? PlasmaLineTrumpf Laser? CO2-Laser TruFlow 5000 with optimized standby, purged with nitrogen and LensLine? Maintenance-free radial turbine blower? Radio-frequency excitation? Gas mixer (integrated)? Laser control TASC ? Laser power control? Logbook function LaserLaser cutting head? Laser cutting head with 250 mm lens? Universal quick-change device (UTI) incl. bus connection? ControlLine: Height regulation and sheet edge detectionControl? Si ...

Machine including Liftmaster.

sheet width: 2050 mmplate thickness: 3.0 mmdistance between columns: 2100 mmback stop - adjustable: 550 mmno. of strokes: 35 Hub/mincutting angle: 2°12 table width: 400 mmtable height: 850 mmControl: konv. total power requirement: 3.0 kWweight of the machine ca.: 1280 kgdimensions of the machine ca.: 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features:- Robust / high-performance electromechanical guillotine shear- Manual material backgauge Continuously adjustable range Adjustment from the back via handwheel Includes mm scale Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front- 1x side stop with mm scale- 2x support arms- 1x freely movable foot switch- rear sheet metal chute- rear safety device (light barrier)- operating instructions (machine control system)- Transport stand (homemade)The data for this ad was  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 €: 2107.35 €: 3100 mm: 20 mm: 20 mm: 16 mm: 16 mm: 12 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 6000 mm: 2200 mm: 1900 mm: 15000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created wit ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 19800 €: 380.16 €: 1550 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7,5 kW: 800 mm: 530 mm: 1855 mm: 2220 mm: 1630 mm: 1230 mm: 2900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070009 : prompt, Zwischenverkauf v : Deutschland : 1600 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakewith 2 spare mandrelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 90004 : prompt, Zwischenverkauf v : Türkei : 22600 €: 1 : 3100 mm: 4 mm: 42 1/min: 1.5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsballs in the tabletilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMANBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machinesThe data for this ad was created with ModulMWS  ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 €: 555.81 €: 100 mm: 500 mm: 1200 mm: 850 mm: 480 kg: 43 cm³: 100 x 6 mm: 3 1/2 x 4 mm: 100 x 6 mm: 100 x 3,6 mm: 100 x 3,6 mm: 114,3 x 6,3 mm: 114,3 x 6,3 mm: 114,4 x 6,3 mm: 88,9 x 3,65 mm: 100 x 5 mm: 70 mm: 100 x 25 stehend, 100 x 5 mm: 400 mm: 36 mm: 10 mm: 0 - 1,3 U/min: 3.5 kWquick-change tooling systemdigital display of bendmaterial spring back compensationremote control of bend, return and emergency stop functionsaccurate counterbending die positioningfootswitch3 hexagonal tool holdersheavy-duty steel gear caseusers manaultools not included, prices on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2010 : 080065 : prompt, Zwischenverkauf v : Deutschland : 29800 €: 1 : 2040 mm: 3 mm: 2 mm: 4.5 mm: Motorisch : 1.5 kW: 1.1 kW: 3060 mm: 1650 mm: 1500 mm: 2730 kg: 750 mm: 140 mm: 50 °/sekCNC control ECT (Schneider Magelis)- Input of bending angle, depth stop dimension, lifting height, folding, precut- max. 36 bending angles can be saved per set- max. 510 sets can be saved- comfortable 7.5", color touch TFT monitor- Power mode for material-friendly operation- Soft start of the bending beam and the depth stop- Visual user guidance in the event of faults (diagnosis center)- Selection of different languages such as German, English ...CNC back gauge- Back gauge range 6 - 750 mm- Drive via belt- 6 stop fingers- support plates with brushesSectioned goose neck rail height 75 mmAdditional 10 mm rail on the bening beamFlat rail R 1 mmFlat rail R 2 mmMechanical drive via gear  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52700 €: 996.03 €: 2550 mm: 10 mm: 10 mm: 8 mm: 8 mm: 6 mm: 245 mm: 245 mm: 180 mm: 1,5 / 6 m/min: 7.5 kW: 4800 mm: 1600 mm: 1470 mm: 6170 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recom ...

: gebraucht : 1992 : 090174 : Belgien : 17800 €: 1 : 3050 mm: 6 mm: 11 - 25 1/min: 0.5 - 3 °: 18 : 750 mm: 11 kW: 3850 mm: 1750 mm: 1720 mm: 4600 kg: 770 mmSC 5 control for:- Sheet thickness input- Automatic cutting angle and gap adjustment- Cutting length limitation- Programmable backgauge lengthMotorized backgauge 750 mmDownholder protection guardFoot pedalTable supports with ball bearings1 side fence 1000 mmOperating manual in GermanMachine does not comply with German accident prevention regulations (UVV) or Austrian AMVONEW BLADESBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5500 €: 106.15 €: 2.5 mm: 160 mm: 250 nm: 4 Stk.: 96 mm: 13 1/min: 1475 mm: 550 mm: 1200 mm: 320 kgreduction motor with brake systemmovement of rolls with foot pedaladjustable idle rollsteel shafts with bronze bushings4 set of rollscomplete with standuser manual in GERMAN or ENGLISHaccording to CE rulesALTERNATIVE (PRICE ON REQUEST):HIBKS 2,5 with hydraulic upper roll feedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : 1030 mm: 8 mm: 5 mm: 14 1/min: 3 °: 7 : 500 mm: 7.5 kW: 100 l: 900 mm: 1550 mm: 1150 mm: 1600 mm: 1800 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42100 €: 804.11 €: 2035 mm: 3.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2450 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rules(sample photo)ALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56500 €: 1067.85 €: 3100 mm: 6.5 mm: Hydraulisch : 135 °: 4500 mm: 1750 mm: 2050 mm: 6800 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21800 €: 418.56 €: 1270 mm: 5 mm: 5 mm: 4 mm: 5 mm: 4 mm: 4 mm: 3 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 2,2 + 1,1 kW: 3020 mm: 1150 mm: 1110 mm: 2150 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.