sheet metal working used for sale (3,356)

: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 €: 428.16 €: 1 : 1 : 2030 mm: 6 mm: 6 mm: 5 mm: 170 mm: 4 kW: 3600 mm: 1020 mm: 1120 mm: 2400 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 27 mm: 27 mm: 18 mm: 23 mm: 20 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21900 €: 420.48 €: 80 to: 285 mm: 300x25 mm: 750x1425 mm: 300 mm: 105 mm: 10 mm/s: 10 mm/s: 10 kW: 930 mm: 1430 mm: 750 mm: 1450 mm: 1700 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090237 : prompt, Zwischenverkauf v : Polen : 7950 €: 153.44 €: 1 : 47 to: 110 mm: 27 mm: 25x18 mm: 8 s: 16 mm: 700 bar: 479 mm: 135 mm: 388 mm: 117 kgMOBILE HYDRAULICS-POWERSTATIONDouble action - fully automated process of punching and returnWide range of hole diameters up to 27mmIntelligent control system with inching and automatic load detectionMode indicator lightProtection against accidental start-upOPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 €: 239.23 €: 60 mm: 500 mm: 760 mm: 1000 mm: 186 kg: 10 cm³: 60 x 4 mm: 2 x 3,91 mm: 60 x 4 mm: 60 x 2 mm: 60 x 3 mm: 60 x 6 mm: 64 x 6 mm: 64 x 6 mm: 63 x 4 mm: 50 x 4 mm: 35 mm: 35 x 35 mm: 60 x 20 stehend, 60 x 35 mm: 380 mm: 10 mm: 10 mm: 1,5 / 3 U/min: 1.5 kWquick-change tooling systemdigital display of bending anglematerial spring back compensationfoot pedal for hands-free operationaccurate counterbending die positioningusers manualtools not included, priced on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 00821 : prompt, Zwischenverkauf v : 1210 €: 1 : 805 mm88°, R=0.6MM H=115MM, Split into left horn section 100/370/10/15/20/40/50/100/100 mm, right horn section, made from 42CrMo4 tool steel, induction-hardened to 54-60 HRC,polishedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15900 €: 305.28 €: 50 - 60 mm: 180 mm: 180 mm: 180 mm: 3 : 3.75 kW: 6 m/min: 60x10 mm / 500 mm, 20x5 m : 80x20 mm / 500 mm, 50x5 m : 32x32 mm / 400 mm, 12x12 : Ø 35 mm / 350 mm, Ø 10 mm : Ø 60x2 mm / 600 mm, Ø 15 : 50x25x3 mm / 450 mm, 20x1 : 45x3 mm / 600 mm, 20x2 mm : 60x60x6 mm / 650 mm, 30x3 : 50x50x5 mm / 550 mm, 30x3 : UPN 80 / 600 mm, UPN30 / : UPN 65 / 600 mm, UPN 30 / : IPN 80 / 600 mm : 1200 mm: 850 mm: 1200 mm: 955 kg3 mech. driven rolls (brake motor)hardened shafts lower rolls hydraulic adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdigital read out for the position of the lower rollsmachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 €: 603.56 €: 2050 mm: 6 mm: 6 mm: 4 mm: 4 mm: 3 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 4250 mm: 960 mm: 1100 mm: 2800 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recommende ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 49600 €: 947.36 €: 130 to: 600 mm: 5 : 2 : 50x18 mm: 80 mm: 600x18 (max. 600x20 mit D mm: 120x120x11 (max. 150x150x mm: 45/40 mm: 130x12 mm: 250x12 mm: 15 kWhydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V50 and V90flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttingtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7500 €: 144.75 €: 1 : 1 : 1050 mm: 3 mm: 90 mm: 6 m/min: 1.1 kW: 1630 mm: 700 mm: 1200 mm: 480 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rollHARDENED ROLLStiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trumpf TruBend Center 5030Year of manuf. : 2021 ____________Description:TruBend Center 5030:- Robust machine frame: - Angular direct drive:- Crowning system:- Machine control with touchscreen operation:- TecZone Fold programming – floating licence:- 2-axis part manipulator with suction modules:- 5-axis backgauge:- Optical angle assistant:- ToolMaster:- Hold-down tools:- OBW90 and UBW90 bending toolsTechnical specificationsMinimum bending depth (standard tool):145 mmMinimum bending depth (with additional hold-down tool):40 mmMaximum bending length:3,123 mmMinimum bending length:80 mmHold-down force:101 tMaximum box height:220 mmMinimum material thickness:0.4 mmMaximum steel material thickness:3 mmMaximum stainless steel material thickness:2.2 mmMaximum aluminium material thickness:4 mmRapid traverse Y-axis (press beam):250 mm/s5-axis backgauge:1,700 mm/sToolMaster Bend:2,400 mm/sD ...

Key data: 6020 mm, 1 mm

with motorized scissors, with CNC depth stop, with 4-stop finger (tilt-turn finger), with 5 stand units, the machine is located in good and well-maintained condition Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 2.00 mm Sheet thickness max. VA 0.80 mm Back gauge (max.) 1000 mm Color: Blue Total power requirement 16 A Dimensions 6900 x 1580 x 1870 mm Weight 3000 kg Upper beam stroke (opening width) 200 mm Sheet thickness adjustment yes, manual Bending angle (max) 140 degrees Roller shears yes, motorized Number of stands 5 pieces Machine number 9538-10

Key data: 6200 mm, 1 mm

with hand scissors, rotary wheel for bending angle adjustment, foot pedal, emergency stop rail Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 6200 mm Max. steel sheet thickness :1.25 mm Sheet thickness max. aluminium: 1.5 mm Sheet thickness max. VA: 0.7 mm Projection: 1000 mm Colour: white/pink Total power requirement: 16 A Dimensions :7000 x 1400 x 1400 mm Weight: 2750 kg Upper beam stroke (opening width) :150 mm Motor power: 2.2 kW without crowning Number of stands: 8 pieces Insertion depth: 1000 mm Machine number 301862

Offer 26186 Technical data: - Max. working width 1275 mm - Max. material thickness (with 40 kg strength) 3 mm - Front angle stop - Front material supports approx. 300 mm - Back gauge adjustable by hand 5 - 650 mm - Stroke rate approx. 32 /min - Cutting angle 1.9 ° - Preselection single stroke / continuous stroke - Drive 400 V / 3.0 kW - E – footswitch - Protective grille at the rear of the machine - Space required including back gauge, without front support arms - approx. W 1500 x H 1150 x D 1450 mm - Weight approx. 1200 kg

Offer 22186 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 3.0 m. with hydr. Withdrawal - Bending tools 20 R 60 ; 22 R 66 ; 25 R 75 mm - 25 R 50 ; 38 R 114 mm - various bending mandrel e 3000 mm

Max. pressing force: 400kN, stroke rate: 100-1200/min, connected load: 18kW, compressed air connection: R 1/2inch, 6-10bar, adjustable strokes: 13, 15, 19, 25, 32, 38, 44, 51, 57mm, max. fixed stroke (special version): 57mm, ram height adjustment: 60mm, tool installation height: 4 Mm 677, max. width of tool installation opening: 690mm, max. strip passage width: 190mm, strip feed height above clamping plate: 60-140mm, bed opening: 640x220mm, lower clamping plate: 4 Mm 671, upper clamping plate: 4 Mm 672, installation dimensions: 4 Mm 667, length: 1695mm, width: 2185mm, height: 3010mm, weight with feed unit: 6.37t. Equipment: drive control, tool clamping plate, installation dimensions, upper clamping plate, hand protection device, BBV 41.202/150 strip feed unit, strip-end monitoring, transport and lifting device, complete documentation, installation, operating and maintenance instructions  ...

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1300 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1550 mm: 2,0 mm: 1,5 mmroll diameter: oben 90 mm: 560 kg: 2580 x 700 x 1250 mm mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mmwall strength: 6 mmbending radius min.: 180 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1300 tdimensions of the machine ca.: 3500 x 1250 x 1300 mDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 €: 980.91 €: 120 mm: 390 mm: 3 : 15 kW: 2/7,5 m/min: 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm: 1650 mm: 1900 mm: 4450 kg3 rolls driven (hydromotor and planetary gearbox)shafts made of special steel,hardened and groundhydraulic adjustment of the 2 lower rollshardened universal rollslateral rolls hydraulic adjustable in 3 axeshorizontal and vertical operationmobile operating panel2 working speedsdigital read out (3 axes)machine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENC ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 €: 653.22 €: 100 mm: 315 mm: 3 : 7.5 kW: 7 m/min: 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm: 2000 mm: 1700 mm: 4000 kg3 hydr. driven rollsstrong welded steel constructionlower rolls hydr. adjustabledigital read-out for lower rollspositions on seperate control panellateral rolls adjustable in 3 axeshorizontal and vertical operationfor- and backward drivemachine and equipment according to theCE regulationsWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 4 mmweight of the machine ca.: 6.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mmplate thickness: 4.5 mmpre-bending: 4.0 mmroll length: 1550 mmmin. dia.: ca. 190 mmroll diam. toproll: 140 mmbending speed: 3.0 m/minengine output: 2.2 kWweight: 1420 kgrange L-W-H: 2700 x 750 x 1000 mmEquipment:- robust electro-mechanical round bending machine- 2x central rollers driven by electric motor (upper & lower roller)- upper roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- lower roller can be adjusted manually, using a handwheel- asymmetrical roller arrangement- self-braking main motor- safety device (safety line with switch unit)- CE mark/declaration of conformitySpecial equipment included in the price:- hardened rollers- motorized side roller adjustment- digital position display for motorized adjustable side rollerThe data for this ad was created with ModulMWS - the software solution ...

flat steel: 350 x 15 mmround bar steel: 35 mmsquare edge steel: 30 mmL-beam: 80x80x8 mmhole diameter in sheet thickness: Ø 27 in 13 / Ø 20 in 18 mmblade length: 356 mmengine output: 3.0 kWStroke rate: 34 Punching capacity: max. 500 kNweight: 950 kgdimensions: 1300x1100x1850 mmStandard equipment:- Knife set for flat steel- Complete knife set for angle steel shears- Complete normal punching equipment- Quick release device for punches up to 31 mm- Support table for punching device, rectangular notching and flat steel shears- Bending stamp with matrices V 40 and V 70- Electric contact stop (1.000 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3030 mmplate thickness: 3.00 mmthickness at Niro-steel: 1.50 mmno. of strokes: 34 Hub/mincutting angle: 1.6 Gradtable height: 820 mmdistance between columns: 3120 mmControl: POS 100 engine output: 2x 4.0 kWweight of the machine ca.: 3600 kgrange L-W-H: 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros () Special price available upon requestThe PDC motorized guillotine shear is the reinforced version of the MHSU.It offers greater performance thanks to a more robust design and a DUO-CUT drive on both sides.Features:- Robust, motorized oscillating-cut guillotine shear- NC-controlled electric motor-driven backgauge with SCHRáDER POS 100 NC control system digital position display for the backgauge adjustable from the front right with setpoint/actual value input stepless adjustment over the entire travel range Limit values secured with limi ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 €: 209.28 €: 1250 kg: 1300 mm: 450 - 550 mm: 400 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlwith pneumatic downholerAlternatives (prices on request):Version without pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 5.5 mmpre-bending: 5.0 mmroll diam. toproll: 140 mmmin. dia.: 210 mmturning speeds: 5.7 U/minengine output: 2.2 kWweight: 1365 kgrange L-W-H: 2020 x 900 x 1.200 mmFurnishing:- Robust electro-mechanical bending machine- 2x central rollers driven by an electric motor (top and bottom roller)- Top roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- Lower roller manually adjustable, by hand wheel- asymmetrical roller arrangement- self-braking main motor- Safety device (safety line with switch unit)- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized side roller adjustment- Digital position display for motor-driven adjustable side rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 10 mmcutting angle: 2 °down holder: 14 Stückno. of strokes: 13 Hub/minthroat: 350 mmoil volume: 260 ltotal power requirement: 22 kWweight of the machine ca.: 10.550 kgdimensions of the machine ca.: 4000x2250x2050 mmDomestic equipments:- Hydraulic swing cut sheet metal shears- Touch screen controller with digital display for backgauge- automatic kerf adjustment via the control- Backgauge control 1000 mm travel with recirculating ball screws- Vibration cutting machine with kerf adjustment- 2 support arms- 1 side stop- Photocell behind the machine- Cutting length limit- cut line lighting- Chrome steel knife- Ball rolls in the table- hinged finger guard with limit switch- Footswitch- CE mark / Declaration of Conformity- Bed instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 60.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 64.0 mm CU/Aluwall strength: 4.0 mmrevolutions per minute: 1.25 - 2.50 U/minbar material - diameter: 35.0 mmvoltage: 400 VoltControl: ISITAN NC total power requirement: 2.0 kWweight: 140 kgrange L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 60.0 x 3.0 mm- Gas tube capacity: 2 Gas x 3.91 mm- Square profile capacity (FE 42) 60 x 30 x 4.0 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasEquipment:- ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each- Patented quick tool change system- Continuously adjustable bending speed- One bending speed- 1 free-floating foot switch- 1 bending tool set included Additional segments available upon reque ...

plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 800 x 800 mmblade length: 250 x 250 mmstrokes per minute: ca. 55 minengine output: 4 kWweight of the machine ca.: 800 kgdimensions of the machine ca.: 1300 x 1300 x 1300 mmFeatures:- Electro-hydraulic notching machine- 2x locking precision stops, with stop bars- Single/continuous stroke selectable- Front finger guard- Freely movable foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.