sheet metal working used for sale (3,345)

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 €: 248.64 €: 0.4 - 2 mm: 300 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21400 €: 410.88 €: 5 mm: 2000 mm: 250 mm: 3000 mm: 750 mm: 1400 mm: 1350 kgMobile control panelHydraulic clamp on centerGearbox motor with brakeMotorized sheet centering systemInside cutting systemThroat depth: 1200 mmAccording to EC safety regulationsOperating manualOPTIONAL EQUIPMENT (PRICES ON REQUEST): 1 spare blade set Flanging attachment with 1 set rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21800 €: 418.56 €: 1270 mm: 5 mm: 5 mm: 4 mm: 5 mm: 4 mm: 4 mm: 3 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 2,2 + 1,1 kW: 3020 mm: 1150 mm: 1110 mm: 2150 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16400 €: 314.88 €: 2050 mm: 3 mm: 35 1/min: 1.5 °: 750 mm: 3 kW: 800 mm: 520 mm: 2720 mm: 1575 mm: 1230 mm: 1900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 2 cutting edges on the lower blade800 mm squaring arm with scale2 support armsMechanical downholderManual cutting gap adjustment on the frontCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 20960 €: 402.43 €: 40 to: 250 mm: 200 x 20 mm: 1100 x 620 mm: 55 mm: 4,7 - 9,1 mm/s: 45 mm/s: 45 l: 3 kW: 950 mm: 1250 mm: 900 mm: 1000 mm: 750 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 230188 €: 3 kW: Wechseltisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 27,9 (mit Absaugung) kW: 4100 x 2070 mm: 4100 mm: 2070 mm: 125 mm: 4064 x 2032 mm: 240 (für 3 - 12 kW) / 400 kg/m²: 3900 (für 3 - 12 kW) / 64 kg: 100 m/min: 100 m/min: 141 m/min: 14 m/s²: +/- 0,05 mm: +/- 0,05 mm: 32 sThe HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading.The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment.The system consists of the following components:Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems)Encapsulated cutting room  ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 188488 €: 3562.42 €: 3 kW: Wechseltisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 26,4 (mit Absaugung) kW: 3100 x 1525 mm: 3100 mm: 1525 mm: 125 mm: 3084 x 1524 mm: 240 (für 3 - 12 kW) / 400 kg/m²: 2200 (für 3 - 12kW) / 360 kg: 100 m/min: 100 m/min: 141 m/min: 14 m/s²: +/- 0,05 mm: +/- 0,05 mm: 25 sThe HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading.The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment.The system consists of the following components:Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems)Encapsulated  ...

: gebraucht : 1998 : 090148 : prompt, Zwischenverkauf v : Belgien : 24900 €: 1 : 3100 mm: 6 mm: 0.5 - 3.5 °: 9.5 kW: 950 mm: 4070 mm: 2330 mm: 3400 mm: 1850 mm: 5500 kgMotorized backgauge 1000 mm, ball screws, digital displayCutting gap adjustment from the front with handwheelCutting length adjusmentCutting angle adjustmentDownholer safety guardRear safety via light barrierFoot pedalTable supports with ball bearings1 side arm 1500 mm2 support armsOperating manual in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return polic ...

: gebraucht : 2020 : 080210 : prompt, Zwischenverkauf v : 1170 €: 1 : 1020 mm: 2 mm: 2 mm: 1 mm: 3 mm: 135 °: 46 mm: 1350 mm: 960 mm: 1145 mm: 282 kgsuctioned upper toolsectioned bending toolclamping by foot pedaloperating manual with EC declaration of conformity in GermanBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machinesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 €: 2107.35 €: 3100 mm: 20 mm: 20 mm: 16 mm: 16 mm: 12 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 6000 mm: 2200 mm: 1900 mm: 15000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created wit ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 811 €: 3/4 26,9 mm, 1 33,7 mm, mm: 3 mm: 2.5 mm: 8 kgThe AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",).The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past.The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1063 €: 1 1/4 42,4, 1 1/2 48,3 mm: 3 mm: 2.5 mm: 15 kgThe AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 €: 1126.44 €: 3100 mm: 10 mm: 6 mm: 50 mm: 13 1/min: 1.5 °: 16 : 22 to: 1000 mm: 200 mm/s: 22 kW: 200 l: 2 Stk.: 865 mm: 580 mm: 3515 mm: 4200 mm: 2250 mm: 3600 mm: 2100 mm: 9300 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 €: 613.11 €: 1 : 3100 mm: 4 mm: 42 1/min: 1,5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsball in the tabletape measuretilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51600 €: 975.24 €: 3080 mm: 6 mm: 4 mm: 350 mm: 20 1/min: 0.5 - 2 °: 16 : 20 to: 1000 mm: 200 mm/s: 11 kW: 125 l: 3 Stk.: 820 mm: 494 mm: 3280 mm: 4100 mm: 2050 mm: 3650 mm: 1950 mm: 7980 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale3 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 1100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 650 mmcoil weight: 15 tmaterial thickness: 16 mmThe year of construction is estimated, the system is as good as newThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Guillotine Shears Fasti 506-10-2.5 BJ 1991

Key data: 1000 mm, 5 mm

Dräco segment bending machine Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1000 mm Sheet thickness steel: 0.5 mm Sheet thickness aluminum: 0.8 mm Sheet thickness front: 0.5 mm Colour: grey Dimensions: 1500 x 600 mm Machine weight: 73 kg Upper bolster stroke: 65 mm without roller scissors without cutting device for cutting to length Opening width: 65 mm Bending angle (max.): 160 degrees Machine number: AGNU0055

Offered for sale is an Atlantic guillotine shear. Cutting length: 3000mm, max. cutting thickness: approx. 6mm. Documentation available. An on-site inspection is possible.

CONTROLS  CNC controls BLM VGP 3D TECHNICAL SPECIFICATION  Max. diameter of tube: 28 mm  Max. wall thickness: 1.5 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 3400 mm  space requirements -front/back-: 1100 mm  total height: 1500 mm  total weight approx.: 1850 kgStainless steel max. 20 mm diameterCNC control with VGP 3D software

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 €: 530.98 €: 3030 mm: 4 mm: 4 mm: 2 mm: 180 mm: 4 kW: 4600 mm: 1120 mm: 1020 mm: 4250 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 39000 €: 744.9 €: 2035 mm: 2.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2100 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rules(sample photo)ALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090222 : September 2026, Zwischenv : Spanien : 15800 €: 303.36 €: 1 : 50 to: 177 mm: 5 : 1 : 31 x 12 mm: 34 1/min: 350 x 15 mm: 80 x 8 mm: 35 / 30 mm: 10 mm: 100 x 10 mm: 3 kW: 1300 mm: 1100 mm: 1850 mm: 950 kgwith bending stationcapacity 50 to5 working stationsflat steel shear with device to reduce deformation350 x 10 mm with adjustment 2°350 x 15 mm with adjustment 5°angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mmrecangular notcher 90 x 42 x 10 mmpunching station 31 x 12 mmpress brake device for flat steel max. 100 x 10 mmtable at flat steel stationtable at notching stationmanual backgauge with electric contact2 dies V40 and V70gap at punching station 177 mmvertical movement of all stations (nor radial)hydraulic drive1 foot releaseuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 48100 €: 918.71 €: 2550 mm: 9 mm: 9 mm: 7 mm: 7 mm: 5 mm: 220 mm: 220 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 4900 mm: 1150 mm: 1250 mm: 4600 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recomme ...

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 €: 1 : 1 : 1050 mm: 1 mm: 56 mm: 1400 mm: 700 mm: 1120 mm: 185 kg3 Walzenasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 46300 €: 884.33 €: 2050 mm: 11 mm: 11 mm: 9 mm: 9 mm: 7 mm: 220 mm: 220 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 4400 mm: 1150 mm: 1250 mm: 4080 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recom ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 68700 €: 1298.43 €: 3100 mm: 13 mm: 8 mm: 50 mm: 13 1/min: 1.75 °: 16 : 37 to: 1000 mm: 200 mm/s: 30 kW: 330 l: 2 Stk.: 840 mm: 600 mm: 3550 mm: 4280 mm: 2300 mm: 3600 mm: 2350 mm: 12500 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade ...

: neu : 2026 : 090204 : prompt, Zwischenverkauf v : Türkei : 4290 €: 1 : 1250 mm: 1.5 mm: 500 mm: 2250 mm: 1000 mm: 1150 mm: 460 kgDEMO MACHINE - MINT CONDITIONwelded steel constructionwith manual hold down unitback gauge adjustable by handwheelusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 18 mm: 18 mm: 12.1 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movem ...