sheet metal working used for sale (3,356)

pressure: 30.0 tpunching cross-cut in cmm: 30.0 in 9.0 mmstroke: ca. 35 Hub/minthroat: 610 mmstroke - stepless adjustable: 0 - 28.0 mmoil volume: 35.0 lwork height max.: 1010 mmtotal power requirement: 4.0 kWweight of the machine ca.: 1200 kg.range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies)Furnishing:- electro-hydraulic hole punch, with large throat- Material/sheet metal scrapers including scraper plates- Large material support table, with adjustable depth stops- continuous stroke adjustment- freely movable foot switch including protective cover- Forklift pockets for easy transport- side storage area- lots of accessories + tools - including tool cabinet- Matrix base (for special size matrices)- Stamp holders (for special size stamps)- original user manuelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

: gebraucht : WA0125 : 122 €: 1 : 835 mm: 0,4 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: max. 4200 mmCutting depth: 3-300 mmweight of the machine ca.: 8,6 tCutting thickness: 3 - 300 mmTrack width torch portal / track width: 5.000 mmUsable cutting width / cutting width: Max. 4,200 mmLongitudinal path / longit. travel: 16000 mmAutogenous burner head / torches head: 1 (3 / burner / torches)Autogenous burner / autogen: 2 burners / torchesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mmplate thickness: 40 mmpre-bending: 30 mmupper roll diameter: 390 mmlower roll diameter: 360 mmside roll diameter: 300 mmtotal power requirement: 22 kWmachine weight ab.: 17200 kgOverall size: 5060 x 2200 x 2180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mmwall strength: / mmbending radius min.: 1,5 x D - 2,0 x D mmcontrol: Siemens LOGO delivery rate: 4,5 l/minbending angle max. +/-: 190 °nominal pressure: 250 baroperating pressure: 3095 bardelivery rate: 4,5 l/mintotal power requirement: 1,5 kWTube diameter: 4 – 28 mmWall thickness: on requestMinimum bending radius: 1.5 × D – 2.0 × DControl system: Siemens LOGO!Hydraulic flow rate: 4.5 l/minMax. bending angle: ±190°Rated pressure: 250 barOperating pressure: 3,095 barTotal power requirement: 1.5 kWAdditional InformationHydraulic cylinder drive with roller chain transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 153200 €: 2895.48 €: 1350 mm: 0,4 - 120 mm: 1370 x 2200 mm: 6000 m³/h: 150 mm: 6 bar: 4200 mm: 2300 mm: 2350 mm: 4200 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station.Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messagesFEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximum height of 950 m ...

sheet width: 1350 mm: 3 mmsheet thickness for stainless steel: 1,5 mmrear stop: 600 mmtotal power requirement: 3 kWweight of the machine ca.: 1150 kgdimensions: 2030 x 1940 x 1220 mmStandard equipment:- All-steel welded construction with static and dynamic frame rigidityframe rigidity- Direct drive with brake motor- Specially alloyed cutting blades- 750 mm motorized, digitally adjusted backgauge with ball screwsrecirculating ball screws- Manual blade gap adjustment system- Mechanical sheet clamping system with plastic base- Work table with insert plates- foot switch for single and repeat cutting cycles- 1 x squaring arm 1000 mm long with metric scale- 2 x 800 mm front material support arms- Front stop- Finger protection - front and rear covers- Rear light guards- CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40900 €: 781.19 €: 2050 mm: 10 mm: 10 mm: 8 mm: 8 mm: 6 mm: 200 - 220 mm: 200 - 220 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 4400 mm: 1150 mm: 1250 mm: 3950 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rol ...

sheet width: 2550 mm: 4 mmsheet thickness for stainless steel: 2 mmrear stop: 750 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3050 kgdimensions: 3300 x 2230 x 1360 mmStandard equipment:- All-steel welded construction with static and dynamic frame rigidityframe rigidity- Direct drive with brake motor- Specially alloyed cutting blades- 750 mm motorized, digitally adjusted backgauge with ball screwsrecirculating ball screws- Manual blade gap adjustment system- Mechanical sheet clamping system with plastic base- Work table with insert plates- foot switch for single and repeat cutting cycles- 1 x squaring arm 1000 mm long with metric scale- 2 x 800 mm front material support arms- Front stop- Finger protection - front and rear covers- Rear light guards- CE declaration of conformityYoutube video link:https://www.youtube.com/watch?v=pCuKwtBIQto&ab_channel=BaestleinG mbHThe data f ...

sheet width: 3100 mmplate thickness: 16 mmdistance between columns: 60 mmtotal power requirement: 30 kWweight of the machine ca.: 13,2 tdimensions of the machine ca.: m- thickness at max. cutting length:16 mm(mild steel 12 mm high grade steel)- cutting length: 3100 mm- cutting angle: max. 2° 25 - depth of gap of standards: 60 mm- rear stop behind blades: 01100 mm- backstop Motor. motoric blade gap adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 kNstroke: 0-200 mmtable-size: 450 x 1000 mmworking speed:: 6-10 mm/ sec.return speed: 20 mm/secwork height max.: 900 mmtoolpiece height max.: 200 mmtotal power requirement: 1,5 kWbending capacity max. - round: 42x3,2 mm: 150x10 mmweight: 320 kgdimensions: 1010x480x1120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mmcoil internal dia.: 360 -440 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1500 mmburner heads: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 100 mmmaterial thickness: 1 mmcross cut: ? total power requirement: 0,75 kWweight of the machine ca.: ? tdimensions of the machine ca.: ? mSheet Cutting MachineWorkspace: 100 x 1Drive: 0,75The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 tchamfer lenght: 2570 mmdistance between columns: 2125 mmcolumn arm: 420 mmtable width: 60.0 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/secstroke: 200 mmdayligth: 470 mmtable height: 960 mmNumber of working hours: ~ 33.100 hoil volume: 90.0 ltotal power requirement: 9.0 KWweight of the machine ca.: 5750 kg.range L-W-H: 3630 x 2450 x 2550 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=SskqZJdQxsQEquipment:- AMADA CNC control, model OPERATEUR II Manual control for fine adjustment of the axes- CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2)- CNC-controlled backgauge adjustment (X1 X2)- CNC-controlled vertical adjustment of the fence fingers (R1 R2)- CNC-controlled adjustment of the stop fingers left-right (Z1 Z2)- Swivel operation, front left- 1x freely movable foot switch- Top tool holder with top wedge  ...

Pressing force: 100 tdiameter: 40 mmthroat: 760 mmtotal power requirement: 8,5 kWweight: 3.600 kgAccessories / equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,0 mmtube diameter: 60,0 mmmotor: 400 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 15330 €: 294.34 €: 22 to: 200 mm: 150 x 10 mm: 1100 x 630 mm: 120 mm: 55 mm: 4,6 - 8 mm/s: 70 mm/s: 45 l: 1.5 kW: 925 mm: 1200 mm: 900 mm: 1050 mm: 630 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWconnected load: 400 Vweight: 395 kgOverall size: 900x600x1100 mmEquipment / Accessories:- Two driven rollers- Manual delivery of the upper roller- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turndifferent profiles are usedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 2 mmdistance between columns: 2050 mmtotal power requirement: 3 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2 x 1,5 mguillotine shearsadjustable backgauge 600 mmgood conditionworking range: 2050 x 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1320 mmplate thickness: 2.5 mm STthickness at Niro-steel: 1.2 mmblade length: 1350 mmno. of strokes: 34 Hub/minback stop - adjustable: max. 825 mmcutting angle: 1.5 °work height max.: 810 mmControl: konv. engine output: 3.0 kWweight: 1100 kgrange L-W-H: 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used () Special price upon requestFeatures:- Robust electro-mechanical sheet metal shear- Heavy-duty / robust drive motor- Manual backgauge, including analog position indicator Adjustment range max. 825 mm- Manual cutting gap adjustment- 2x table side stops including mm scale- 1x front stop bar - manually adjustable- 2x front support arms- Grip recess in the front work table- 1x freely movable foot switch, including emergency stop button- Control cabinet/operating panel - front right- Rear safety device- Rear sheet chute- Connection cable + plugThe data fo ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 25 mm: 25 mm: 16 mm: 20 mm: 18 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

sheet width: 6200 mmplate thickness: 8 mmthroat: 60 mmdistance between columns: 6400 mmcutting angle adjustment: 0,5 bis 2 °total power requirement: 13 kWweight of the machine ca.: 19 tCutting width: 6,200 mmMax. sheet thickness: 8 mmThroat depth: 60 mmDistance between side frames: 6,400 mmCutting angle adjustment: 0.5° – 2.0°Total power requirement: 13 kWMachine weight: approx. 19 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 85.0 tchamfer lenght: 2050 mmdistance between columns: 1650 mmcolumn arm: 400 mmstroke: 240 mmdayligth: 320 - 560 mmajustment speed: 150 mm/secworking feed: 15.0 mm/secreturn speed: 150 mm/secback stop - adjustable: 5.0 - 1000 mmtable width: 110 mmwork height max.: 1050 mmoperating pressure: max. 297 barcompressed air: 4.5 - 6.0 baroil volume: 200 loperating pressure: 340 bartotal power requirement: 7.5 kWweight of the machine ca.: 5900 kgrange L-W-H: 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=ikl6RNZWeiUEquipment:- CNC electro-hydraulic press brake- including CYBELEC CNC control swiveling control panel at the front right external screen- CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning- CNC electro-motorized back stop (X axis) Trave ...

tube diameter: 273 mmwall strength: 15,1 mmbending radius min.: 150 mmbending radius max.: 1250 mmtotal power requirement: 30 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 48x3,5 mm: 48x2,5 mm: 32 mm: 64x2 mmbending speed: 2 U/min: R10-R300 total power requirement: 1,5 kWweight of the machine ca.: 110 kgdimensions of the machine ca.: 410x1000x570 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mmplate thickness: 10,0 mmthickness at Niro-steel: 6,0 mmdown holder: 28 Stückno. of strokes: 18 Hub/minoil volume: 260 ltr.cutting angle: 0,5 - 2 °control: CYBELEC Cybtouchengine output: 22,0 kWback stop - adjustable: 1000 mmrange L-W-H: 6100 x 2580 x 2460 mmweight: 15.100 kg.-------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment-------------------------------------------------- Furnishing:- CNC guillotine guillotine shears- with electr. / hydr. Cutting gap and cutting angle adjustment- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- mo ...

I - beam section - flat steel: 80 x 15 (Ø350) mmI-beam section - upend: 50 x 10 (Ø400) mmL-beam: 40x40x5 (Ø400) mmtool adaptor: Ø 30 Welle mmturning speeds: 7.0 U/mintube diameter: rund 60x1.5 (Ø1000) mmtube diameter: vierk 40x2.9 (Ø1000) mmtotal power requirement: 0.75 kWweight of the machine ca.: 160 kgdimensions of the machine ca.: 650 x 600 x 1400 mmFeatures:- Electric-motor-driven ring profile bending machine- Two driven rollers (lower rollers)- Manual adjustment of the upper roller- Includes analog position indicator (mm scale)- Shafts mounted with tapered roller bearings- 2 side guide rollers - Machine base frame- 1 freely movable control unit Rollers can run clockwise or counterclockwise- Various rollers included in the scope of deliveryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 bending speed: 2,5 U/min: 54,0 x 2 mmSheet thickness aluminum: 54,0 x 2 mm: 42,4 x 3 mmsheet thickness for stainless steel: 42,4 x 2 mm: 30 mm: einphasig - 230 Vdrive motor: 1,5 kWweight of the machine ca.: 80 kgdimensions of the machine ca.: 363 x 900 x 595 mm‘ERCOLINA MEDI BENDER’Single-phase mandrel-less bending machine up to 42 mmFeatures:- Control system: Soft-touch control panel in 8 different languages- Number of programs: 30, each with 9 bends- Standard accessories (including foot switch, user manual)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090069 : prompt, Zwischenverkauf v : Türkei : 840 €: 1 : 0.8 mm: 80 mm: 110 nm: 7 Stk.: 52 mm: 380 mm: 180 mm: 380 mm: 30 kg7 tool setsusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.