sheet metal working used for sale (3,307)

: neu : 2026 : 090187 : prompt, Zwischenverkauf v : Türkei : 14400 €: 276.48 €: 1 : 1350 mm: 3 mm: 35 1/min: 550 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 1900 mm: 1350 mm: 1260 mm: 1060 kgmanualback gaugeautomatic sheet hold downhold down with rubber padsmoveable foot switchside lay2 supporting armslight barriers on the back of the machineuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll bending machine manufactured in 2020. This MG MG4R1520C features a working width of 1,550 mm and a bending capacity of 20.0 mm. It includes a CNC TouchCommand EVO control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MG MG4R1520C machine we have for sale. Contact us for further details.

: neu : 2024 : 9729 : prompt, Zwischenverkauf v : Türkei : 28450 €: 488.96 €: 1 : 25600 €: 1550 mm: 7 mm: 7 mm: 4.5 mm: 4.5 mm: 3.5 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 3750 mm: 960 mm: 1100 mm: 2500 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:(time of deliver with options approx. 10 weeks)Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 19100 €: 366.72 €: 4000 kg: 1300 mm: 450 - 550 mm: 600 mm: 50 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlALTERNATIVES (prices on request):Version with pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 15600 €: 299.52 €: 55 to: 750 mm: 40x10 mm: 37 1/min: 5 kW: 1930 mm: 1200 mm: 1800 mm: 1885 kghydr. driveSupport table with stopOperating instructions in GERMAN and ENGLISHCNC options on requestWe have an extensive stock of punches and dies at your immediate disposal.WE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20000 €: 384 €: 1270 mm: 5 mm: 5 mm: 4 mm: 5 mm: 4 mm: 4 mm: 3 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 3020 mm: 1150 mm: 1110 mm: 2150 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12150 €: 233.28 €: 0.4 - 2 mm: 100 mm: 200 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A manual punching machine Boschert with a digital display is available. Throat depth: 300mm, travel X: 500mm, punching force: 280kN, max. sheet thickness: 6mm. Including digital display and stops. Documentation available. An on-site inspection is possible.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 26300 €: 502.33 €: 2050 mm: 4 mm: 4 mm: 3 mm: 3 mm: 2 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 2,2 + 1,1 kW: 3800 mm: 1150 mm: 1110 mm: 2450 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 22400 €: 430.08 €: 80 to: 300 mm: 5 : 40/14 bzw. 24/24 mm: 70 mm: 40 1/min: 450x15 / 300x20 mm: 130x130x13 mm: 45 mm: 12x52x90 mm: 9 kW: 2310 mm: 1200 mm: 2050 mm: 2070 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformation by diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmstandard hydraulic, centring deviceoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISH(sample photo shows mod. hyd 80 SD) option ",Kit", EURO 970,--length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Fur ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 7 mm: 7 mm: 4 mm: 5 mm: 5 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement of  ...

: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT• Entry guide• 2 Feeding rolls• 5 Straightening rolls• Cut-to-length shears• Encoder• Touch screen control• Servomotor• Slitting shaft with 2 sets of quickly adjustable circular blades, to a maximum of 6 bladesOPTIONS- Film plastic device- Different types of uncoilers- Stacking systems- Recoiler Maximum Width: Material to be processed: Thickness: Number of simultaneous slitting cuts: Production speed: Coil loading capacity: Number of straightening rolls: Straightening ServoMotor: Shears Power: Dimensions: 1250 Steel 420 Nw/mm2 1`25 mm 2 from 0 zu 120 Meter pro Minute3, 6, 10 to 2 + 5 15 kW 3 kW 2100 x 1700 x 1450 mm2500 kg 1`00 mm 4 0`50 mm 6 Steel 700 Nw/mm2 0`75 mm 2 0`50 mm 4 Aluminium 200 Nw/mm2 2`50 mm 2 1`50 mm 1`00 mm 6If you are interested, please send us your enquiry with the following details:- Coil w ...

: gebraucht : 1988 : 070009 : prompt, Zwischenverkauf v : Deutschland : 1600 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakewith 2 spare mandrelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 5010 mm: 1.5 mm: 2 mm: 4 : 4 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gripper system ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 €: 242.5 €: 0.4 - 2 mm: 200 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 4010 mm: 2 mm: 2 mm: 1.5 - 2 mm: 5 : 5 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gripper  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 €: 209.28 €: 1250 kg: 1300 mm: 450 - 550 mm: 400 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlwith pneumatic downholerAlternatives (prices on request):Version without pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 8310 : prompt, Zwischenverkauf v : Taiwan : 50700 €: 958.23 €: 1 : 2035 mm: 3.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2200 kgNC control for bending anglemanual back gauge 600 mmhydraulic drivenvertical movement of upper beamsegmented bladesegmented goose neck rail 30°, 110 mm with quick tool change systemone piece flat bottom bar 30 mmaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 269588 €: 3 kW: Wechseltisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 29,9 (mit Absaugung) kW: 6100 x 2070 mm: 6100 mm: 2070 mm: 125 mm: 6096 x 2032 mm: 240 (für 3 - 12kW) / 400 kg/m²: 5800 (für 3 - 12kW) / 960 kg: 100 m/min: 100 m/min: 141 m/min: 14 m/s²: +/- 0,05 mm: +/- 0,05 mm: 42 sThe HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading.The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment.The system consists of the following components:Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems)Encapsulated cutting room  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15900 €: 305.28 €: 50 - 60 mm: 180 mm: 180 mm: 180 mm: 3 : 3.75 kW: 6 m/min: 60x10 mm / 500 mm, 20x5 m : 80x20 mm / 500 mm, 50x5 m : 32x32 mm / 400 mm, 12x12 : Ø 35 mm / 350 mm, Ø 10 mm : Ø 60x2 mm / 600 mm, Ø 15 : 50x25x3 mm / 450 mm, 20x1 : 45x3 mm / 600 mm, 20x2 mm : 60x60x6 mm / 650 mm, 30x3 : 50x50x5 mm / 550 mm, 30x3 : UPN 80 / 600 mm, UPN30 / : UPN 65 / 600 mm, UPN 30 / : IPN 80 / 600 mm : 1200 mm: 850 mm: 1200 mm: 955 kg3 mech. driven rolls (brake motor)hardened shafts lower rolls hydraulic adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdigital read out for the position of the lower rollsmachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1998 : 090148 : prompt, Zwischenverkauf v : Belgien : 24900 €: 1 : 3100 mm: 6 mm: 0.5 - 3.5 °: 9.5 kW: 950 mm: 4070 mm: 2330 mm: 3400 mm: 1850 mm: 5500 kgMotorized backgauge 1000 mm, ball screws, digital displayCutting gap adjustment from the front with handwheelCutting length adjusmentCutting angle adjustmentDownholer safety guardRear safety via light barrierFoot pedalTable supports with ball bearings1 side arm 1500 mm2 support armsOperating manual in German with CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 €: 209.28 €: 60 mm: 595 mm: 363 mm: 900 mm: 130 kg: 10.5 cm³: 60 x 3 mm: 2Gas x 3,91 mm: 60 x 4 mm: 60 x 2 mm: 60 x 4 mm: 60 x 4 mm: 64 x 4 mm: 64 x 4 mm: 60 x 4 mm: 50 x 4 mm: 35 mm: 60x30x4 stehend, 60x40x5 mm: 300 mm: 10 mm: 10 mm: 1,25 / 2,50 U/min: 1.5 kWdigital read out for bending anglemanual clampingmaterial spring back compensationdigital read out and zero setting for clamping point2 speedsoverload protectionmobile by rolls and handletools not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 8286 : prompt, Zwischenverkauf v : Türkei : 2990 €: 1 : 2040 mm: 0.8 mm: 70 °: 2400 mm: 750 mm: 850 mm: 290 kgstraight upper toolmoveablemanual cutting deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3 mmangle adjustable from - to: 30 - 120 Gradtable height: 900 mmweight: ca. 800 kgCutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel, cutting angle continuously adjustable from 30° to 120°, pneumatic clamping for angle adjustment (Boschert system), machine is in good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: max. 3 mmdistance betw. rolls: 125 mmthroat: max. 500 mmweight: ca. 500 kgMaterial thickness at 40 kg/mm² tensile strength: max. 3 mmWorking width: 500 mmWorking depth: 450 mmManual adjustment of the upper rollerRoller center distance: 125 mmContinuously variable working speed: 3–15 m/minStop skirt1 set of rollersForward/reverse operation via foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

contact roller: 70 x 50 abrasive belt size: 2000 x 12/50 power capacity: 2,2 kWOverall size: ca. 400 x 1100 x 1250 mmdeburring machine / free belt frinding machineabrasive belt with widt from 12-50 mm with vertical working positionhead inclination up to 45° both wayseasy bending of the belt allows to follow the shapecutting speed 24m / secbig tabel surface with ball rollingwith self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/hcomes with a huge bunch of belts!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 42.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 54.0 mm CU/Aluwall strength: 2.0 mmbar material - diameter: 30.0 mmrevolutions per minute: 2.0 U/minvoltage: 230 VoltControl: ERCOLINA total power requirement: 1.1 kWweight: ca. 75.0 kgrange L-W-H: 410 x 1000 x 570 mm current new price incl. accessories ~ 10.000 euros conditions like new ! special price on requestERCOLINA MediBender MB 42- Capacity steel tube 42 x 3.0 mm- Capacity gas pipe 11/4 gas x 3.5 mm- Capacity square profile (FE 42) 35 x 35 x 3 mm- Max. Bending radius 10-260 mm- Minimum radius 2 x D- Hexagonal tool holder- Min. outside diameter 5 mm - 1/8 gasEquipment :- patented quick tool change system- one bending speed- free-moving foot switch Bending tool included in the scope of delivery :- D 20 sliding shoe new bending segment R 67 mm- D 32 sliding shoe new bending segment R 82 mm- D 35 Sliding shoe new  ...

sheet width: 3050 mmplate thickness: 10.0 mmthickness at Niro-steel: 6.0 - 8.0 mmdown holder: 13 Stückdistance between columns: 3070 mmcutting angle: 1.0 - 4.0 °no. of strokes: ~ 22 Hub/minControl: ELGO P8511 oil volume: 240 lvoltage: 400 Vtotal power requirement: 15.0 kWweight: 8000 kgrange L-W-H: 3550 x 2350 x 1900 mm good condition () from a maintenance workshopEquipment:- NC electro-hydraulic guillotine shears- heavy / stable welded construction (machine body)- NC ELGO digital control unit P8511- NC electro-motorized backgauge on ball screws- electro-hydraulic cutting angle adjustment Front analog cutting angle display- 1x stable side fence, with T-slot and mm scale- 3x stable support arms, with T-slot and mm scale- Ball castors in the work table incl. recessed grips- Front finger guard - can be folded up at the front- 1x freely movable foot switch- 2x front emergency stop button-  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 22 mm: 22 mm: 16 mm: 19 mm: 17 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 33000 €: 630.3 €: 2530 mm: 6 mm: 6 mm: 4 mm: 190 mm: 5.5 kW: 4250 mm: 1200 mm: 1150 mm: 3750 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.