3710 results

similar results found in category spare parts

item-No.: 143542786
-
100 €
country-de DE
Electric motor ADH 132 S-2 incl. pulley and tension rails, LWH approx.: 450 x 330 x 310 mm Total length clamping rail: 530 mm Pulley: B 50 mm, D 125 mm 2910 Upm, IP44 Cos 0.90
item-No.: 143520953
-
112.000 €
country-pl PL
The machine packs in full cartons or trays. Capacity up to 80 cartons per minute. The change to the new carton format takes place from the operator panel - very quickly. Siemens S-7 control. Machine dimensions: Length: 9m Maximum width: 3.2m Height: 2.4 m. Weight: 3.5 tonnes The machine is equipped with a set of necessary spare parts for 2-3 years of operation. The machine after complete renovation in very good condition. Ready to work. We provide 12 months warranty. The condition of the machine  ...
item-No.: 143520834
Compressed air connection 6 bar Suction 1x80 mm, 1x100 mm Power connection 4.5 kW Cutting length 5300 mm Cutting height 2200 mm The machine is expressly sold as defective, only for export or as a spare part dispenser.
item-No.: 143520810
- 120°C mixing temperature; 45°C cooling temperature - 130 kW mixing motor; 100 kW cooling motor - Heating tank 630 l capacity, cooling tank 1600 l capacity - Spare parts for mixers: mixing tools
item-No.: 143514972
SOMOS dryer TF40 with integrated material conveying + MC1 control for plastics - 3 GFK dryers in stock + 1 dryer with VA hopper Colour: Turquoise Dry air volume: 40m3/h Heating capacity Dry air: 4.5 kW Drive capacity: 0.5 kW Connected wattage: 5.0 kW Dimensions dryers + hoppers: 95x66x230 (LxWxH in cm) - with a reduction in support Weight Dryer: 165kg Additional: - 100l GFK drying hopper insulated on integrated frame - Lid for sep ...
item-No.: 143494455
-
465 €
country-de DE
AC-DC switching controller, +/-15V power supply 2 variants available: P3093-05151PF: 19" DIN insert built-in switching power supply +5.1 V/DC / 14 A / 104 W, +/-15V, 1.5A, sits in the kc4 control panel at Droop & Rein. P2111-15151PF: 19" DIN insert built-in switching power supply +/-15V, 4A, sits in the control cabinet for kc4 control at Droop & Rein. Price per piece.
item-No.: 143494438
-
250 €
country-de DE
Bleeder module Brake module for servo drives
item-No.: 143476500
-
395 €
country-de DE
Beam traverse / load traverse for transporting long workpieces etc. with a forklift, max. 1 tonne - used - : Prices - from construction site - from location: only 395.- â?¬ (net)! Make: Wiedemann Type: STS 10 - 30 Built: 11/2010 Capacity: 1,000kg Weight: 84kg Little in use Depth: approx. 12cm Length: approx. 3.08m Condition: good Available: from now on Location: Mainz
item-No.: 143453464
-
1.880 €
country-de DE
Fitting and in-line drilling machine Ganner 192 Machines No. 541 947 Complete with table L x W x H = 150cm x 100cm x 210cm Weight approx. 200 kg Built in 1989 380 V 50 Hz 0.8 kW 1.8 A 54 IP 2800 rpm The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...
item-No.: 143453457
-
1.690 €
country-de DE
Lock inlet machine Haffner SL 100 Weight approx. 240 kg L x W x H: 100 cm x 80 cm x 220 cm Built in 1986 with various chain sets The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 143453455
-
160 €
country-de DE
Buendigfraese HolzHer UF 362 Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Built in 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 143453448
-
BN 3.280 €
country-de DE
Vacuum lifting device GIS with swivel device, for plate handling LxWxH 500cm x 70cm x 70cm 150kg Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 143453445
-
BN 3.960 €
country-de DE
Veneer press Langzauner Pressing area 2550mm x 1300mm Electric heating plates Gold anodized LxWxH 300cm x160cm x190cm Weight 3500kg Upper heating plate has small delay during heating Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 143434410
Maximum bar capacity 32 mm Spindle bore 37 mm Maximum spindle speed 8.000 rpm Headstock stroke 390 mm Bar feeder (plus 1x as spare)
item-No.: 143434406
max. size 27 x 35 cm age 2001 envelope feeder mobile sub-frame belt delivery Ref: SC190305A Please ask for price. We ship and install worldwide!
item-No.: 143434246
2 pieces available For more information, please refer to the enclosed photos.
item-No.: 143433857
-
650 €
country-de DE
Pendulum circular saw incl. support table and stop 4m 380V 3.7kW Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 143433851
Alu tubes x18 Dimensions 8x 600cm
item-No.: 143433849
-
2.260 €
country-de DE
Cutting length 6m 380V 7.5kW Machine is in good condition and ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 143413318
Description Glueingpress OPO max. length 3000 mm6 clamping elements 0 - 2100 mm2 Horizontal clamping pressure per clamping element 1200 kgL x W x H: 2700 x 900 x 2300 mmWeight approx.250 kgConstruction year 1988incl. HolderThe gluing loader is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden
item-No.: 143413298
-
BN 1.750 €
country-de DE
Table belt grinding machine Hoefer BSM I Bandwidth 150 mm L x W x H: 3500 x 1300 x 1600 mm Weight approx. 570 kg Built in 1989 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden
item-No.: 143413261
-
1.690 €
country-de DE
Lock inlet machine Haffner SL 100 Weight approx. 240 kg L x W x H: 100 cm x 80 cm x 220 cm Built in 1991 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 143413258
MIT BOOKLET MAKER WATKISS POWERSQUARE 200 ONLINE Leistung: Bis zu 23.200 Blatt Einzugskapazität, Laden Sie während des Laufs Ausrüstung / weitere Angaben: Watkiss Powersquare 200 Online PBS Stacker ( Hochleistungs-Buchablage) Spares kit, PSQ R3 1ST line support DRUCKEN AUFLÖSUNG: 4800 x 600 dpi printing RIP at 1200 x 1200 dpi
item-No.: 143413259
WITH BOOKLET MAKER WATKISS POWERSQUARE 200 ONLINE Power: Up to 23,200 sheet feed capacity, load while run Equipment / Additional information: Watkiss Powersquare 200 Online PBS Stacker ( high performance bookcase) Spares kit, PSQ R3 1ST line support PRINT RESOLUTION: 4800 x 600 dpi RIP at 1200 x 1200 dpi
item-No.: 143413257
-
4.680 €
country-de DE
Battioni & Pagani BP side stacker 5 ton payload Diesel engine Table width and gabella length 140cm Built in 1988 Weight empty approx. 8 to L x W x H: 500 x 250 x 350 cm The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden
item-No.: 143413048
Gas Motor Generator Set in Container, Jenbacher JGS 620 GS-N. L incl. WT Gas engine Type JGS 620 GS - Version E12 for natural gas Generator AvK - 690V / 50Hz Refurbished at 30,000 operating hours All services up to 32000 operating hours were carried out by an authorized Jenbacher Service Partner Delivery: - Gas control line complete for natural gas - Heat exchangers for hot water - Exhaust heat exchangers for thermal oil - Silencer - Table cooler for low and high temperature - Generator switch  ...
item-No.: 143413029
-
BN 990 €
country-de DE
Bito Roller Bars Plastic rolls Length: 1m Width: 40mm 8000 pieces on 8.5 pallets Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 143412979
-
4.890 €
country-de DE
The four-sided planing machine Pinheiro MF4EX-630 is in good condition, ready for operation. Planing width 630 mm Planing hight 200 mm L x W x H = 4500 mm x 1600 mm x 1900 mm Weight approx. 4000 kg Machines No. 5783 Voltage 400 V Power consumption 44.5kW Frequency 50 Hz Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 1 ...
item-No.: 143412977
Front lift, front force lifter ex Iseki TX 5390. Further hoist also in stock ex Iseki 5040, suitable 5035, 5135, 5140. Other parts available, also diesel engine with turbocharger, 28 kw. Shipping worldwide. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...
item-No.: 143412976
Fronthubwerk, Frontkraftheber ex Iseki TX 5390. Weiteres Hubwerk auch vorrätig ex Iseki 5040, passend 5035, 5135, 5140. Weitere Teile verfügbar, auch Dieselmotor mit Turbolader, 28 kw. Versand weltweit. ------ Jodau Kommunal-, Umwelt- & Grünpflegetechnik ------- Gebrauchtmaschinen für Anlagen- & Sportplatzpflege, Garten- & Landschaftsbau, Friedhofstechnik & Winterdienst, Kehrarbeiten & Entsorgung, Umweltpflege, Motoren und mehr...
item-No.: 143385028
Measurement of density and grid percentage of templates and films in b/w
item-No.: 143384969
Fiber laser machine HLF Power: 6kW Sheet metal size: 3000 x 1500mm Changing table Siemens touchscreen control with LAN/USB Siemens Drives Precitec Auto Focus Procutter Cutting Head IPG Resonator YLS-K with 6kW will include: Guarantee CAD CAM Software Libellula[CUT] Commissioning Delivery within Dtl Training offered Other sizes/power levels up to 15kW are available at short notice. We have been a trading house and service provider in Germany for YAWEI machines for more than 15 years. All train ...
item-No.: 143384967
new
7.250 €
country-nl NL
Toolroom lathe Leinen DLZ140 Centre distance: 500 mm Centre height: 140 mm Spindlebore: 28mm Spindelspeeds: 15-3100 Tailstock MT3 Incl digital read out Set of collets K28 48 Pc Steady rest and follower rest 3-Jaw Scroll chuck with inner, outer and soft jaws 4-Jaw Scroll chuck with inner, outer and soft jaws Quick change toolpost with 7 toolholders Set of changegears 8Pc Some spare timing belts
item-No.: 143357079
-
5.650 €
country-de DE
Main spindle controller 400A Technical data DKR Drive Controllers DOK-DIAX03-DKR-PR02-EN-P 4.3 DKR04 Designation of the drive controller Designation Symbol Unit DKR04.1-W300-... Rated power voltage 3xAC 400 ... 480, 10% System frequency f Hz 50 ... 60 Control voltage AC 230 V, .10% Continuous current of the drive (4 kHz/8 kHz) I conteff A 4 kHz: 185 8 kHz: 130 4 kHz: 210 8 kHz: 150 Peak current of the drive I maxeff A 212 282 Continuous power of the drive (4 kHz/8 kHz) P cont kW 4 kHz: approx. 82  ...
item-No.: 143357075
-
680 €
country-de DE
Servo Power Part Axle Drive Device SIMODRIVE 610 AC-VSA FBG PERFORMANCE 70/140 A, TYPE I 1/2 ACHSE
item-No.: 143357063
-
300 €
country-de DE
DC servo amplifier servo controller Transistor controller plug-in module for speed control of DC servo motor. Dimensions: 160x81x100mm
item-No.: 143356673
-
1.350 €
country-de DE
Simodrive 611 Power unit Servo module PERFORMANCE 30/40/51 A, main spindle drive from Bridgeport milling machine. Weight: 9kg
item-No.: 143356661
Huron EX-C 5-axis machine machining center 5-Axis machine center vertical Type: EX-C 20 Control Unit: Siemens 840D Model: 1998 Spindle renewed/Spindle renewed in 2018 Chip conveyor/Chip conveyor new 2016 Displacement paths X Longitudinal displacement 1600mm Y Transverse shift 700mm Z Vertical displacement 800mm Spindle Plug-in cone HSK63-A Tool clamping force 18,000N Maximum power 25kW Spindle speed 100-14,000 kW Maximum moment 256mN Characteristic speed 1,000rpm Head Type C Working axis  ...
item-No.: 143356642
-
275 €
country-de DE
SIMODRIVE 610 Power Supply Simodrive 6SC Power Supply
item-No.: 143356556
-
1.600 €
country-de DE
SIMOREG DC Master Spindle Servo Module Inverter device with microprocessor for four-quadrant drives circuit (B6) A (B6) C Input: 3AC 400V, 104A controllable: Regreger rectiverator D420/125 MREQ-GEG6V62 Output: DC 420V, 125A output US rating: DC 420V, 107A Field input: 400V, output: 325V, 10A Can be used as a replacement for BBC AAD6701, Simoreg 6RA2632-6DV57-0 or Simodrive 6RA2732-6DV57-0. Installation possible on site.
item-No.: 143356544
-
300 €
country-de DE
Digitale Ein-/Ausgangs-Karte Elektronik-Einschub DRT1.1 für Fidia CNC-Steuerungen.
item-No.: 143356545
-
300 €
country-de DE
Digital input/output card Electronic slot DRT1.1 for Fidia CNC controllers.
item-No.: 143356543
-
400 €
country-de DE
for motor MAC90, peak current 30A.
item-No.: 143356533
-
180 €
country-de DE
Profibus module for Indramat Eco-Drive servo modules R911276719 276719
item-No.: 143356517
Fully functional folding machine, can also serve spare part dispensers. Top maintained machine Rollers and ribbons in order Kobrak Tecnica TK52 - Model: 1G. R.T.K - Built: 1991 - with 4 - folding pockets - Format: A3 -A4 - with counter - with blow and suction compressor - Immediately Available
item-No.: 143355778
-
650 €
country-de DE
! Price is only valid for fixed charge until the end of November ! CNC lathe Gildemeister GAC65 - as spare part carrier, made in 1992 consisting of: Basic machine Switch cabinet Chip conveyor Switching diagrams and a programming guide missing or defective parts: Cards and modules (removed, defective, included) Revolver motor removed, but fine (included) technical data: Turning diameter 160 mm Bar diameter max. 65 mm Passage in the pull pipe approx. 70 mm Chuck diameter 160 mm (for pressure clamp ...
item-No.: 143336385
new
448 €
country-at AT
Pro-face AGP 3302-B1-D24, Digital Electronics, Ex, neu, original packed Manufacturer: Digital Electronics Type: AGP 3302-B1-D24 Attention! We have set the lowest price for the new part on the market. We have other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging ...
item-No.: 143318379
various SIMODRIVE 611 servo modules: 6SN1123-1AA00-0BA0 25A or 6SN1123-1AA00-0CA1 50A or 6SN1123-1AA00-0DA1 80A Price per piece
item-No.: 143318371
-
950 €
country-de DE
Servo Supply Unit / AC Power Supply Weight: about 25kg Can also be used as a replacement for the KDV2.1-100-220/300-W1 (DMG-No. 2279373) installed by Maho by using an additional cable supplied if required.
item-No.: 143318335
-
320 €
country-de DE
Simodrive 610 Power Supply 2 different types available SIMODRIVE 610/210 VSA SIMODRIVE 610/210 VSA FBG POWER AND CONTROL. 6SC6100-0GA00 or 6SC6100-0GA11, both versions available, price per piece.
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)